{ Group of lots: 410, 411, 412 } LOT OF CAST IRON CRADLES (2), 17" x 8" x 30"

{ Group of lots: 410, 411, 412 } LOT OF CAST IRON CRADLES (2), 17" x 8" x 30"

{ Group of lots: 413, 414 } LOT OF SET-UP BLOCKS (4), 13" x 9" x 13"

{ Group of lots: 413, 414 } LOT OF SET-UP BLOCKS (5), 13" x 9" x 13"

{ Group of lots: 415, 416, 417, 417A } LOT OF SET-UP BLOCKS (4), 8" x 12" x 10"

{ Group of lots: 415, 416, 417, 417A } LOT OF V BLOCKS (2)

{ Group of lots: 415, 416, 417, 417A } LOT OF V BLOCKS (2)

{ Group of lots: 415, 416, 417, 417A } LOT ASSORTED SET UP BLOCKS ( in 1 row)

{ Group of lots: 418, 419, 420 } TOOL CABINET, LISTA, w/taps, endmills, drills & tooling

{ Group of lots: 418, 419, 420 } LOT CONSISTING OF: workbench & cabinets (3)

{ Group of lots: 418, 419, 420 } LOT OF CABINETS (3), w/contents

T-SLOTTED FLOOR PLATE, 96" x 204"

RADIAL ARM DRILL, AMERICAN HOLE WIZARD 7' X 17", spds: 15-1200 RPM

CABINET, w/hold-downs & studs

WASH BOOTH, 169" x 95"

POWER WASHER, ALKOTA MDL. 420X4, S/N 276876

LOT OF CONTROLS PANELS (2)

LOT OF TOOLING, assorted (on six skids)

ROTARY SCREW AIR COMPRESSOR, INGERSOLL-RAND (out of service)

SHOP CRANE, CAROLINA 3 T. CAP.

{ Choice of lots: 430, 431 } ELECTRIC PUMP

{ Choice of lots: 430, 431 } ELECTRIC PUMP

WELDER, LINCOLN

INGROUND BEAM SCALE, FAIRBANKS

CNC HORIZONTAL BANDSAW, BERRINGER MDL. HBP360A, new 1994, 14” x 14” cap., auto. feed w/H.D. infeed conveyor, CNC programmable infeed control, 5.5 ...

RADIAL ARM DRILL, CARLTON 10' X 26", 4” spdl. dia., 24” spdl. travel, #6 MT taper, spds: 10-1000 RPM, pwr. clamping & elevation, pwr. head travel,...

CNC VERTICAL TURRET LATHE, O.M. MDL. TM-20, G.E. 1050 CNC control, 78.7" table dia. w/(4) top jaws, 4 pos. indexing turret, pendant control, S/N M...

UNIVERSAL MILL, BOKO MDL. F30, rebuilt 1996 by Dorries Scharmann, 47-1/4" x 63" built-in rotary table, swivel vert. head, #50 NST spdl. taper, spd...

VERTICAL BORING MILL, BETTS 20', 19'-1" table dia., 21'-3" table swing (28.5" above table), 12’-10-3/4” max. ht. under rail, 121” under saddles, (...

PORTABLE FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL. 570F, 8' vert. travel, 16' horiz. travel, 7" spdl., spds: 4-1200 RPM, main spdl....

POWER INFEEDING ROTARY TABLE, TOS TYPE ISO-16, new 1978, 86" sq., approx. 60" pwr. runway travel, S/N 01-07

LOT ASSORTED TOOLING W/2 cabinets

{ Group of lots: 441, 442 } RACK, w/round stock

{ Group of lots: 441, 442 } LOT OF RACKS (2), w/round stock

RACK, w/round stock

RADIAL ARM DRILL, CINCINNATI “SUPER SERVICE” 7' X 19", spds: 18-1124 RPM, (2) H.D. box tables, pwr. clamping, pwr. head traverse, S/N 6E-270

COMBINED PLANER MILL/PLANER, DETRICK & HARVEY 120” X 100” X 26’ OPEN SIDE, rebuilt & retrofitted by Kysor Machine Tools in 1979, 60' table width, ...

AIRLIFT ROTARY TABLE, GIDDINGS & LEWIS 60" X 96"

TABLE TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL. A110-T, 4.33" spdl., 74" x 48" table, 60" cross travel, 60" vert. travel, 72" long. trave...

CNC LATHE, MORI SEIKI MDL. SL35B1000, Fanuc MFT6 CNC control, 23.6” swing, 16.5” turning dia., 4.1” spdl. hole, 2,500 RPM, 30 HP, 12" chuck, 10 po...

ENGINE LATHE, NILES 54" X 48', 43” swing over carriage, spds: 1.51-171.8 RPM, 30 HP drive motor, bed mtd. taper attach., built-in faceplate w/(4) ...

CNC TABLE TYPE HORIZONTAL BORING MILL, CINCINNATI GILBERT SERIES DT 5-AXIS, Fanuc Series 0i-MD CNC control retrofit on roller pedestal, 5" spdl., ...

CNC CONTOURING ROTARY TABLE, 60" sq.

{ Group of lots: 451, 452 } LOT OF TOOLHOLDERS (25), CAT-50

{ Group of lots: 451, 452 } LOT OF V FLANGE TOOLHOLDERS (27)

CNC TABLE TYPE HORIZONTAL BORING MILL, TOSHIBA MDL. BP-130.P40, Tosnuc 888 CNC control, 5.12” spdl. dia., 9.84” milling spdl., 70.0" x 155" table,...

LOT OF BORING HEADS (3), CAT-50 taper

LOT OF TAPING HEADS (2), CAT-50 taper

{ Group of lots: 456, 457, 458 } LOT OF COLLET TOOLHOLDERS (2), CAT-50 taper, w/collets

{ Group of lots: 456, 457, 458 } LOT OF COLLET TOOLHOLDERS (3), CAT-50 taper, w/collets

{ Group of lots: 456, 457, 458 } LOT OF COLLET TOOLHOLDERS (2), CAT-50 taper, w/collets

{ Group of lots: 459, 460 } RACK, w/CAT-50 taper toolholders (9)

{ Group of lots: 459, 460 } LOT OF TOOLHOLDERS (21), CAT-50 taper

CNC TABLE TYPE HORIZONTAL BORING MILL, TOSHIBA MDL. BP-110.P20, Tosnuc 888 CNC control, 4.33” spdl. dia., 55" x 80" table, 30,000 lb. table cap., ...

TABLE, w/CAT-50 taper toolholders (26)

COMBINED PLANER MILL/PLANER, G.A. GRAY 72" X 72” X 20' DOUBLE COLUMN, rebuilt & retrofitted by Kysor Machine Tools in 1981, 68” x 20’ table size, ...

CNC LATHE, AMERICAN MDL. 4025WX168 UNIVERSAL, Fagor 8055AT CNC control retrofit, 45" sw. over bed, 25" sw. over crosslide & toolholder, 168” btn. ...

ENGINE LATHE, AMERICAN 44" X 26', spds: 1.8-157 RPM, built-in faceplate, 4-jaw chuck, followrest, bed mtd. sliding taper attach., (4) steadyrests,...

ENGINE LATHE, MONARCH 32" X 132" MDL. 30NN, spds: 6-302 RPM, taper attach., 2-axis D.R.O., 30" dia. 4-jaw chuck, 2-1/2" spdl. hole, faceplate, ste...

ENGINE LATHE, LODGE & SHIPLEY 22" X 120" MDL. X, spds: 9-500 RPM, 21" dia. 4-jaw chuck, 12" dia. 4-jaw chuck, 2-axis D.R.O., 2-1/2" spdl. hole, ta...