NEW / UNUSED CHEVALIER FSG-618M MANUAL SURFACE GRINDER, 6” X 18” MAGNETIC CHUCK, S/N FA3185015
Sweco FM Series Vibratory Finisher, Urethane Lining, 48" Diameter
Almco Vibratory Finisher, Round Type, Urethane Lining, 48" Diameter, 12,083 Hours Indicated
Dual Station Rotary Shot Blast Machine, with Control Cabinet, Exhaust
MFI Finisher, Model HZ-60, 4 Station Tumbler Parts Finishing Machines S/N#26084H, Year 2015
Blastec Shot Blaster: (Opening 9’3 (T) x 11’ 6” (W) Cabinet Opening, (8) Blastec 30HP Direct Drive Shot Blast Wheels, (1) Blastec Air Wash Separto...
Meyer Power Sander w/ Reese Hitch Adapter
2018 RSA TURNAMAT DEBURRING MACHINE, 1,500 – 3,000 RPM, S/N RSA-14626-10 2017 RSA TURNAMAT DEBURRING MACHINE 2006 EWU ROTOMAT DEBURRING MACHINE, S...
TELESIS TMP3200 PINSTAMP MARKING SYSTEM **FREE LOADING ASSISTANCE IS AVAILABLE FOR THIS ITEM (FORKLIFTS ON SITE) ALL ITEMS ARE SUBJECT TO ASI 3?...
WHEELABRATOR AIR POLLUTION CONTROL 621313 VOLTAGE DISPLAY BOARD **FREE LOADING ASSISTANCE IS AVAILABLE FOR THIS ITEM (FORKLIFTS ON SITE) ALL ITE...
S/N: 97B Located in San Angelo, TXMake: BaldorSerial #: 97B
CENTRAL MACHINERY 6" BELT/9" DISC SANDER, S/N 358452121
Pneumatic buffer/grinder with box of assorted pads
12" Disc sander on pedestal - 1HP - model 5281
DELTA 4" BELT/6" DISC SANDER, MODEL 31-460 TYPE 2, 120V, SINGLE PHASE, 1/3 HP, S/N P 2002
CANABLAST ECAB SERIES SUCTION / SANDBLAST CABINET W/ DUST COLLECTOR
CENTRAL PNEUMATIC 110 LB ABRASIVE BLASTER
JET 8” INDUSTRIAL GRINDER WITH STAND
Pneumatic Die Gringer & 4" Disc Sander
KALAMAZOO BELT SANDER WITH STAND
TUMBLER 14" X 36" WORKING AREA
BRAND : CANABLAST TYPE : SandBlaster MODEL NO : DC-50 SERIAL NO : MD-5910-0220 NOTE :
JET 8 INCH INDUSTRIAL GRINDER MODEL IBG – 8
Precision Bench Table Belt/ Disc Sander Model 3032-00005, 110 V, 60 Hz, Belt Size 100 X 915MM, Disc Size 150 MM,
CENTRAL PNEUMATIC 68893 40 LB Floor Blast Cabinet, s/n 373831422
LOT (2) AIR STRAIGHT LINE SANDERS
LOT - (3) GRINDER/BUFFER, PEDESTAL STAND
DELTA 6" BELT/9" DISC SANDER COMBO, MODEL 31-695, S/N P9804
KALAMAZOO 2" BELT SANDER, 1/2 HP, W/ STAND
MSC 2-Hole Reah-In Blast Cabinet, 35" x 60" with Spray Nozzle
Secondline 2-Hole Reach-In Blast Cabinet, 24" x 36" Model RA-36-1, S/N E-80-398 with Nozzle & Dust Collector
Aero Blast Dry Blast Cabinet (SOLD AS-IS - NO WARRANTY)
Wysong & Miles #171 Panel Polisher/Sander
Skat Blast Abrasive Blast Cabinet, 34" + Wheel kit, per seller good-fully functional
ECONOLINE SAND BLAST CABINET MODEL 36-1, S/N 90-3998
Skat Blast Abrasive Blast Cabinet, 28" + Wheel kit, per seller good-fully functional
BOYAR SCHULTZ SURFACE GRINDER, NO CHUCK
Storm-Vulcan mdl. 135 Crank Shaft Finishing Machine s/n 50-187 (SOLD AS-IS - NO WARRANTY)
Speedaire 6Z757 30-Lb. Portable Sand Blaster
2000 Watt Hand Grinder (New) (LOCATION: 3421 N Sylvania Ave, Ft Worth TX 76111)
2000 Watt Hand Grinder (New) (LOCATION: 3421 N Sylvania Ave, Ft Worth TX 76111)
Master Pneumatic Tool 4-01 8" Pneumatic Sander
Chicago Pneumatic 3321A6000P 6" Pneumatic Sander
Craftsman 7" Electric Right Angle Buffer/Polisher
WILTON 4210 6" X 12" BELT/DISC SANDER, S/N 07110130
SCHMIDT MARKING SYSTEM, M# SYLINER MARK 4, S/N 17418, 7' X 7' TRANSFER BALL TABLE, PC CONTROLS, (2) SIDE TABLES
Accu-Finish Series II Lapping Machine
Norton Brake Controlled Truing Device
Central Machinery Combination Sander, 6" Belt, 9" Disc, 115 Volt (Bldg. 36)
Wilton 4200 Disc-Belt sander, 12” disc, 6” belt w/ foot switch
Dayton 1/2 HP 8" Surface Sander
Dayton 3/4HP Grinder/Sander 115/230/60
Shop Fox 6" Belt & 12" Disc Sander, Model W1712, 1-1/2 HP, 110 V
Eastwood Buff motor, Bench buffer 8" long shaft, per customer excellent condition
Jet 6'' Industrial Belt Finisher Location: Swansea MA
Rikon Buff motor, Bench buffer 8" long shaft - Low speed, per customer excellent condition
PowerTec BF600, Bench buffer 6", per customer good condition
Loading...
