VERTICAL TURRET MILL, BRIDGEPORT MDL. J, 9" x 48" table, Mdl. T cherrying attach., Mdl. J belt driven head

ENGINE LATHE, LEBLOND REGAL 15" X 30", spds: 45-1800 RPM, taper attach., 8" dia. 3-jaw chuck, 12" dia. 4-jaw chuck, steadyrest, faceplate, driving...

ENGINE LATHE, SOUTHBEND 12" X 20", taper attach., 3-jaw chuck, accessories, Catalog No. L145B, S/N 10145TKX14

LOT OF CABINETS, w/hardware

SHELF, w/maintenance supplies

T-SLOTTED TABLE, 86" x 41-1/2" x 5"

CAST IRON SURFACE PLATE W/stand

(6) ASSORTED LIFTING CRADLES

INDUCTION BEARING HEATER, REDCO, 220 v.

LOT CONSISTING OF: shelf, cabinets, foreman's desk, contents

LOT CONTENTS OF ROOM, desk, chairs, tables, shelving and etc. 

CNC TURNING & MILLING CENTER, MORI SEIKI MDL. NL3000Y/3000, new 6/2008, MSX850 CNC control, 39.2” sw. over bed, 32.5” sw. over crosslide, 16.5” tu...

LOT OF ROTARY TOOLHOLDERS (4), assorted (for the Mori Seiki CNC Turning & Milling Center)

LOT OF LATHE TOOL BLOCKS (4), assorted (for the Mori Seiki CNC Turning & Milling Center)

LOT CONSISTING OF: spring collets and assorted tooling (for the Mori Seiki CNC Turning & Milling center)

TOOL CABINET, LISTA, w/endmills, taps & drills

CNC FLOOR TYPE HORIZONTAL BORING MILL, GIDDINGS & LEWIS MDL. G60-FX, rebuilt & retrofitted in 2006, Siemens 840DI CNC control, 120" Y-axis headsto...

LOT OF BORING HEADS (3), #50 taper

LOT OF TOOLHOLDERS (19), CAT-50

LOT CONSISTING OF: boring bars, drills, toolholders

LOT OF SPRING COLLETS

{ Option of lots: 372, 373, 374, 375 } SET-UP BLOCK, 48" x 59" x 23" ht.

{ Option of lots: 372, 373, 374, 375 } SET-UP BLOCK, 48" x 59" x 23" ht.

{ Option of lots: 372, 373, 374, 375 } SET-UP BLOCK, 48" x 59" x 23" ht.

{ Option of lots: 372, 373, 374, 375 } SET-UP BLOCK, 48" x 59" x 23" ht.

ENGINE LATHE, LEBLOND, 42" sw. over carriage, 20' dist. Btn. Centers, spdl. spds: 6-315 RPM, 30 HP drive motor, 2 1/4" spdl. hole, rapid traverse,...

GEAR SHAPER, MAAG 197” MDL. SH-350-500, 20.8” max. face width, ¾” dia. pitch, 3-95 SPM, Oblique head cutter, change gears, motor w/electric pushbu...

GEAR HOBBER, PFAUTER MDL. 3000-5000, new 1971, 120” to 200”, 1.27-DP max. cap., 9.8” max. face width, 200” max. workpiece dia., control console, h...

GEAR HOBBER, GOULD & EBERHARDT 72” MDL. 72H, 18” face width, 36” table dia., tailstock, coolant system, change gears, motor w/electrical pushbutto...

GEAR HOBBER, NEWARK 48” MDL. 5, 24” max. face width, 43” table dia., change gears, motor w/electrical pushbutton controls (Sold by Photo - Loca...

GEAR GENERATOR, SYKES HERRINGBONE 68” MDL. 1600H, new 1982, 18.031 max. face width, 14-120 SPM, workholding fixture, outboard suppt. stand, coolan...

{ Choice of lots: 381, 382 } GEAR GENERATOR, GLEASON 24” MDL. 12, 3” max. face width, motor w/electrical controls, index plates & change gears, S/...

{ Choice of lots: 381, 382 } GEAR GENERATOR, GLEASON 24” MDL. 12, 3” max. face width, motor w/electrical controls, S/N N.A. (Sold by Photo - Lo...

GEAR CHUCKER, MAAG 110,000 LB. CAP. MDL. MCR-500, 200” dia. (disassembled) (Sold by Photo - Located off-site at Steward Machine Company, 3911 ...

GEAR CUTTER, CINCINNATI 30” (Sold by Photo - Located off-site at Steward Machine Company, 3911 13th Avenue North, Birmingham, AL 35234)

CNC VERTICAL MACHINING CENTER, MAZAK MAZATEK MDL. V-515, Mazatrol M32B CNC control, 121-1/2" x 51" table, 20" X-axis travel, 20" Y-axis travel, 40...

CABINET, LISTA, w/taps, drills, assorted tooling

SUPPLY CABINET, 2-door, H.D., w/assorted tooling

{ Option of lots: 389, 390, 391, 392 } LOT OF TOOLHOLDERS (14), CAT-50 taper

{ Option of lots: 389, 390, 391, 392 } LOT OF TOOLHOLDERS (14), CAT-50 taper

{ Option of lots: 389, 390, 391, 392 } LOT OF TOOLHOLDERS (14), CAT-50 taper

{ Option of lots: 389, 390, 391, 392 } LOT OF TOOLHOLDERS (18), CAT-50 taper

{ Group of lots: 393, 394, 395 } LOT OF COLLET TOOLHOLDERS (2), w/collets

{ Group of lots: 393, 394, 395 } LOT OF COLLET TOOLHOLDERS (2), w/collets

{ Group of lots: 393, 394, 395 } COLLET TOOLHOLDER, w/collets

{ Group of lots: 396, 397 } LOT OF SPRING COLLETS (18), 150 TG

{ Group of lots: 396, 397 } SHELF, w/hold-downs & studs

INFEEDING ROTARY TABLE, GIDDINGS & LEWIS 96"W. X 145-1/2"L., Mdl. 7RT, on sliding base, approx. 60" slide travel, pwr. clamping, 3-spd. drive, S/N...

T-SLOTTED CAST IRON ANGLE PLATE, 67"W. x 108" ht. x 35" dp.

LOT OF FABRICATED STEEL T-SLOTTED ANGLE PLATES, 36"W. base section x 58' dp. x 96" ht. upper section (ttl. 12' ht. when combined, 2 pc. matched pa...

LOT OF FABRICATED STEEL ANGLE PLATES, 30"W. x 88" ht. x 34" dp. (matched set)

LOT OF HEAVY T-SLOTTED MACHINE STANDS, 54"W. x 120"L., w/T-slotted cast iron table

LOT OF CAST IRON ANGLE PLATES (2), 17-1/2" x 21-1/2" x 66-1/2"

LOT OF DRILLED & TAPPED CAST IRON ANGLE PLATES, 42" x 42" (matched pair)

CAST IRON ANGLE PLATE, 42" x 36" x 30"

{ Group of lots: 406, 407, 408 } LOT OF CAST IRON ANGLE PLATES (2), 20" x 24" x 12"

{ Group of lots: 406, 407, 408 } LOT OF CAST IRON ANGLE PLATES (2), 17" x 17" x 17"

{ Group of lots: 406, 407, 408 } LOT OF ANGLE PLATES (9), assorted

LOT OF CAST IRON CRADLES (2), 18" x 8" x 38"

{ Group of lots: 410, 411, 412 } LOT OF CAST IRON CRADLES (2), 17" x 8" x 30"