Featured lot
2008 IMCAR CPHV60 Angle Bending Roll, s/n B 3031742
We found 28 featured lot(s)
Refine your search
Lots with images only
Remove filter
Location
Primary Category
Category
Brand
Item Type
- Shear (5)
- Chuck (3)
- Tooling (3)
- Vise (3)
- Angle Roll (2)
- Bending Roll (2)
- Collet (2)
- Drill (2)
- Lathe (2)
- Machine Vise (2)
- Mill (2)
- Taper (2)
- Wire (2)
- Bar Shear (1)
- Base Drill (1)
- Bore (1)
- Boring Bar (1)
- Broach (1)
- Compound Cross Slide (1)
- Cross Slide (1)
- Cutter (1)
- Die (1)
- Drill Press (1)
- Face Plate (1)
- Follow Rest (1)
- Gap Bed Lathe (1)
- Grinder (1)
- Magnetic Base (1)
- Oil Skimmer (1)
- Plate Shear (1)
- Power Feed (1)
- Presetter (1)
- Radial Arm Drill (1)
- Slotted Table (1)
- T Slotted (1)
- Taper Tooling (1)
- Toolpost (1)
- Tube Cut Off (1)
Auction Type
Country
State/Province
Auctioneer
- Aaron Industrial Solutions (1)
- Branford Group (4)
- CIA Industrial, LLC (2)
- Corporate Assets Inc. (1)
- HYPERAMS, LLC (1)
- Infinity Asset Solutions Inc (5)
- Integra Asset Solutions (1)
- Ironside Machinery (1)
- Joseph Finn Co., Inc. (1)
- Myron Bowling Auctioneers (2)
- Perfection Industrial Sales (6)
- Prestige Equipment Auctions (1)
- Prestige Equipment Auctions / Holland Industrial Group (1)
- Revelation Auctions (1)
The featured lots page shows the best lots from the BidSpotter.com website. These featured lots have been chosen by our auctioneers and showcase their premier items.
This is just a small selection of the huge volume of lots on BidSpotter.com. You can search across the entire site for the items you are looking for. If you can't find what you are looking for you can set up alerts to notify you when that item is added to the site.
Filtered by:
- Lots with images only,
- Category
- List
- Grid
-
28 item(s)/page
Featured lot
2014 MODERN 6MNC CNC Tube Cut-Off, s/n 6MNC63, w/ Fanuc 0i-TD, 1" - 7" OD, 1" Max. Wall Thickness, 50" Outfeed Length, Table Will Hold 24' Materia...
Featured lot
2013 HANSFORD DAVIS 15 1.5" Keyseater, s/n 15-1769, w/ Assorted Broaches and Tooling
Featured lot
Poreba Type TR-115B2/6M Gap Bed Lathe, 44" Swing over Ways, 19.6' Between Centers, 14" Gap, 34" Swing over Cross Slide, 4-3/4" Spindle Bore, Inch ...
Featured lot
2021 Haas ST-10 CNC Chucker, 16.5" Max. Part Swing, 12" Max. Cutting Diameter, 16" Max. Cutting Length, 1.75" Bar Capacity, w/ Royal Products Mdl....
Featured lot
DRIL-QUIP DUAL MODULAR BORING BAR WITH CART MODULAR BORING TOOLS (MBT) 4" DIAMETER, 1-1/4" RADIAL STROKE
Featured lot
Hitachi Seiki VK55 CNC VMC, S/N VK55080, 22" x 55" Bed, 20 Station A.T.C., Seicos Control, Tooling, (2) 9" Machine Vises
Featured lot
2019 Doosan DNM-4000 CNC Vertical Machining Center, Doosan-Fanuc i Series CNC Controls, 20.47" x 15.7" x 18.9" Travels, 25.6" x 15.9" T-Slotted Ta...
Featured lot
LECTRA GERBER TECHNOLOGY (2023) DCS 2600 HIGH SPEED LOW PLY CUTTING CNC SYSTEM WITH GERBER TECHNOLOGY WINDOWS PC BASED CNC CONTROL, 72" X 144" TAB...
Featured lot
Lot 260
LEWIS MODEL 11 STRAIGHTEN AND CUTOFF MACHINE; S/N HF-13, ½ - ¾” CUTOFF DIAMETER, FLYING SHEAR,
LEWIS MODEL 11 STRAIGHTEN AND CUTOFF MACHINE; S/N HF-13, ½ - ¾” CUTOFF DIAMETER, FLYING SHEAR, 75 – 140 FPM FEED RATE, 75 HP, 8-ENTRANCE ROLLS, 6-...
Featured lot
Lot 263
WIREMATIC (COMPARABLE TO LEWIS MODEL NO. 12) STRAIGHTEN AND CUTOFF MACHINE; S/N N/A, 1” CUTOFF
WIREMATIC (COMPARABLE TO LEWIS MODEL NO. 12) STRAIGHTEN AND CUTOFF MACHINE; S/N N/A, 1” CUTOFF DIAMETER, 100-300 FPM FEED RATE, 10-ENTRANCE ROLLS,...
Featured lot
Lot 39
5” GIDDINGS & LEWIS PMC-5 CNC Table Type Horizontal Boring Mill, s/n 410-127- 72, w/ SZGN CNC Series
5” GIDDINGS & LEWIS PMC-5 CNC Table Type Horizontal Boring Mill, s/n 410-127- 72, w/ SZGN CNC Series 1000MDC CNC Control ,120" X 48" Table, NMTB 5...
Featured lot
Lot 40
5" GIDDINGS & LEWIS 70-D5-T CNC Table Type Horizontal Boring Mill, s/n 150-1117-68, w/ Travels: x-
405" GIDDINGS & LEWIS 70-D5-T CNC Table Type Horizontal Boring Mill, s/n 150-1117-68, w/ Travels: x-
5" GIDDINGS & LEWIS 70-D5-T CNC Table Type Horizontal Boring Mill, s/n 150-1117-68, w/ Travels: x-84", y-36", z-42"
Featured lot
Lot 49
NEW – NEVER USED BERNARDO 125 Ton Hydraulic Ironworker, Shear/Section Cut/Notching/ Punch @ 125
NEW – NEVER USED BERNARDO 125 Ton Hydraulic Ironworker, Shear/Section Cut/Notching/ Punch @ 125 Ton Capacity, 8-20 SPM, 6" x 6" x 1/2" Angle Shear...
Featured lot
Fein Slugger Model JHM USA 101 Magnetic Base Drill Press (Magna Drill)
Featured lot
Hansford 20 Ton Die Handler Model 1020, S/N 559
Featured lot
Latour Robomac 310 Wire Bender Type D1000 with Wire Decoiler Approx., 22638 Hours, Year 1998
Featured lot
Lot 127
Aim Inc AFC-6 Wire Bender
Aim Inc AFC-6 Wire Bender, S/N D7211142014, Aim Inc P270-5 Wire Decoiler, Conveyor
Featured lot
Zund S3-L-1600 Digital CNC Cutter w/ Camera, S/N S300-L-160822, Zund Pump
Featured lot
Kellenberger UR-M175/1000CNC CNC ID/OD Grinder, S/N 620531, 1995, with 1,000 mm Centers, 1,700-RPM Wheel, 500-RPM Workhead, (1) ID, (1) OD, (1) Fa...
Featured lot
Lot 34
Hardinge Model HLV-H Lathe
Hardinge Model HLV-H Lathe, w/ 6" 6-Jaw Chuck, Aloris Model AXA Toolpost Holder, Tailstock, Power Feed, Acurite Digital XY Readout
Featured lot
CINCINNATI SHEAR 6208, 8'L X 3/4" CAP., S/N 10978
Featured lot
SMT-PULLMAX Z100 HYDRAULIC ANGLE ROLLS AND FEEDER STANDS
Featured lot
Lot 64
SMT-PULLMAX PV7H HYDRAULIC PLATE BENDING ROLLS, MAX BENDING CAP. 2-1/2" X 10', CONE BENDING CAP. 1-
SMT-PULLMAX PV7H HYDRAULIC PLATE BENDING ROLLS, MAX BENDING CAP. 2-1/2" X 10', CONE BENDING CAP. 1-3/16" X 10', 23-7/16" DIA. BENDING ROLLS, HYDRA...
Featured lot
Osborn model 722 RJW molding machine s/n 0816-15638 with controls
Featured lot
Featured lot
Loading...-
28 item(s)/page