LOT OF ER25 SPRING COLLETS, assorted

LOT OF SPRING COLLETS, assorted (in two boxes)

LOT OF COLLET TOOL HOLDERS, w/ spring collets, assorted

CNC WIRE EDM, MAKINO MDL. U6 H.E.A.T., new 8/2016, Hyper I CNC, 35.8" x 27.9" tbl., 25.61" X, 17.7" Y, 16.5" Z-axis travels, 39.4" x 31.5" x 15.8"...

CNC WIRE EDM, MAKINO MDL. U3 H.E.A.T., new 5/2016, Hyper I CNC, 24.8" x 17.7" tbl., 14.6" X, 10.6" Y, 8.7" Z-axis travels, 30.3" x 23.2" x 8.7" ma...

STRAIGHT SIDE DOUBLE CRANK PRESS, DANLY 800 T. CAP. MDL. S2-800-120-60 Q.D.C., 16" stroke, 48" shut ht. of slide to carrier, 12" adj., 16 - 24 SPM...

STRAIGHT SIDE DOUBLE CRANK PRESS, WARCO 300 T. CAP., MDL. 300-2-84, 60" front to back x 84" right to left bed size, 5-1/4 bolster thickness, 50" x...

{ Choice of lots: 181, 182 } FABRICATED RAM SPACER, 53-1/2" X 54", drilled and tapped on 3-1/2" centers, 15-5/16" thick

{ Choice of lots: 181, 182 } FABRICATED RAM SPACER, 53-1/2" X 54", drilled and tapped on 3-1/2" centers, 15-5/16" thick

RAM SPACER, T-SLOTTED, 72" x 42" x 13" thk.

{ Choice of lots: 184, 185 } BOLSTER PLATE, T-SLOTTED, 77"L. x 44"W. x 2" thk.

{ Choice of lots: 184, 185 } BOLSTER PLATE, T-SLOTTED, 77"L. x 44"W. x 2" thk.

T-SLOTTED TABLE, DEVLIEG, 40"L. x 26"W. x 5-1/4" thk.,

PULL THROUGH STRAIGHTENER, COE MDL. HS5-30, 30"W., 5 roll- pull through straightener, on fabricated stand, S/N 4937-3

DIE TRYOUT PRESS ALFA MDL. 100-D, 100 T., dual palm button controls, 32-1/2" x 44" bed size, 24" x 44" ram size, drilled tapped bed and ram, S/N 1...

CUSTOM HYDRAULIC SHOP PRESS, approx. 25 T., 48" x 24" bed size, w/ T-slot, 2-1/4" dia. ram, hand operated hyd. system, rapid ram advance

{ Group of lots: 190, 191 } LOT OF STUDS & HOLD DOWNS, w/ cart, assorted ...[more]

{ Group of lots: 190, 191 } LOT OF STUDS & HOLD DOWNS, w/ cart, assorted ...[more]

PLASMA CUTTER, MILLER SPECTRUM 1000, on roller cart, S/N LJ290181P

MIG WELDER, AIRCO PULSE ARC II 400, 400 amp., w/ Med40 wire feeder

{ Group of lots: 194, 195, 196 } DC ARC WELDER, LINDE UCC-305, 300 amp., w/stick leads

{ Group of lots: 194, 195, 196 } WELDING BENCH, 89"L. x 33"W. x 1" thk.(no contents)

{ Group of lots: 194, 195, 196 } LOT OF WELDING ACCESSORIES, assorted

TORCH CART (no tanks)

TRINCO DRYBLAST, GLOVE BOX STYLE BLAST, 36" x 36" w/ recirculating abrasive system

HEAT TREAT FURNACE, LUCIFER MDL. HS8-K24, 24 kW, 2,450 deg. furnace, 1,200 deg. draw furnace, 233/60 230 v., digital temp. controllers, S/N 6784

HEAT TREAT FURNACE, LUCIFER MDL. 8912-AM-C, 31 kW, 3/60/230 v., 2,100 deg. furnace temp., Honeywell temp. controls

TRANSFORMER, SQUARE D COMPANY, 3-phase insulated, style 34349-28212-016, 75 kVA, Class AA, WT. 610, 60 Hz., HV 480 , HV amps. 90, LV 240, LV amps....

ELECTRIC DIE LIFT, BIG JOE MDL. 75110, 1,500 lb. cap., currently arranged as a furnace handler, S/N 120

ROTARY SCREW AIR COMPRESSOR, ATLAS COPCO MDL. GA26P, new 2014, 34.9 HP, S/N CA18110680

REFRIGERATED AIR DRYER, BEKO DRYPOINT RA MDL. RACT200-R/XB, new 2021, w/cycling technology, S/N 210005863/21

AIR RECEIVER, SYLVAN INDUSTRIES, new 1998, approx. 36" dia. X 8' tall

AIR RECEIVER, approx. 30" dia. x 7' tall

FORKLIFT, HYSTER 15,000 LB. BASE CAP. MDL. S150A, 14,900-lb. max. cap @ 24" load center, LPG, 99.5" max. lift, large dia. cushion tires, addl. cou...

FORKLIFT, HYSTER 6,000 LB. BASE CAP. MDL. S60FT, 5,650-lb. max. cap., @ 24" load center, LPG, 176" max. lift, 21" x 8" x 15" cushion non-marking f...

{ Choice of lots: 209, 210 } SET OF FORKLIFT FORKS, 54"L. x 6"W.

{ Choice of lots: 209, 210 } SET OF FORKLIFT FORKS, 42"L. x 5"W.

PICK-UP TRUCK, 2016 FORD F-150 LARIAT 4X4 CREW CAB, 105,000 miles, Rocky Ridge Altitude edition lift kit, auto. running boards, full leather, shor...

PICK-UP TRUCK, 2012 FORD F-250 SUPER DUTY XLT 4X4 CREW CAB, B20 diesel, running boards, 175,000 miles, short bed, pwr. stroke, VIN 1FT7W2BT8CEA958...

BRIDGE CRANE, 15 T. CAP. OVERHEAD CRANE SERVICE CO. W/ RUNWAY, approx. 54' span, top running, single girder, under-hung, Yale 15 T. unitized wire ...

FREE STANDING SYSTEM, 5 T. CAP. X 23'10" SPAN X APPROX. 85', 19'10" distance btwn. upper columns, 13'5" ht. to crane rail, approx. 10'H. under hoo...

CRANE SCALE, MARTIN DECKER MDL. 5U24B-0250, 25,000 LB. CAP., w/ H.D. steel stand, S/N 775

{ Group of lots: 216, 217 } CHAIN, 4-hook

{ Group of lots: 216, 217 } CHAIN, 4-hook

{ Group of lots: 218, 219 } CHAIN, 4-hook

{ Group of lots: 218, 219 } CHAIN, 2-hook

{ Group of lots: 220, 221 } LOT OF CHAINS (4), 2-hook

{ Group of lots: 220, 221 } CHAIN, 2-hook

{ Group of lots: 222, 223 } LOT OF CHAINS (4), assorted

{ Group of lots: 222, 223 } LOT OF CHAIN, assorted (In bucket)

LOT OF SLINGS, assorted (in one crate)

STEEL TOOL STORAGE BOX, 48"L. x 30"W. x 30" dp.

H-FRAME HYDRAULIC PRESS, CAROLINA MDL. CBP1200, 50 T. CAP., S/N 14257 (needs new dial pressure gauge)