{ Choice of lots: 118B, 118C, 118D, 118E, 118F, 118G } MACHINE VISE, KURT, 8"

{ Choice of lots: 118B, 118C, 118D, 118E, 118F, 118G } MACHINE VISE, KURT, 8"

{ Choice of lots: 118B, 118C, 118D, 118E, 118F, 118G } MACHINE VISE, KURT, 8"

{ Choice of lots: 118B, 118C, 118D, 118E, 118F, 118G } MACHINE VISE, KURT, 8"

{ Choice of lots: 118B, 118C, 118D, 118E, 118F, 118G } MACHINE VISE, KURT, 8"

RIGHT ANGLE ATTACHMENT, BRIDGEPORT

{ Choice of lots: 120, 121 } BORING HEAD, BRIDGEPORT

{ Choice of lots: 120, 121 } BORING HEAD, BRIDGEPORT

BORING HEAD, BRIDGEPORT

BORING HEAD, CHANDLER-DUPLEX

TAPPING ATTACHMENT, TAPMATIC MDL. 30X

{ Choice of lots: 125, 126, 127, 128 } LOT OF R-8 TOOL HOLDERS, assorted

{ Choice of lots: 125, 126, 127, 128 } LOT OF R-8 TOOL HOLDERS, assorted

{ Choice of lots: 125, 126, 127, 128 } LOT OF R-8 TOOL HOLDERS, assorted

{ Choice of lots: 125, 126, 127, 128 } LOT OF R-8 TOOL HOLDERS, assorted

PRECISION TOOLROOM LATHE, HARDINGE MDL. HLV-H, variable speed 125-3,000 RPM, inch/metric threading, 2-axis Acu-Rite digital read-out, quick change...

ENGINE LATHE, LEBLOND SLIDING BED GAP, 19" sw. over bed, 8" sw. over cross slide, 37" sw. in gap, approx. 28" length of gap, 36" center distance c...

ENGINE LATHE, LODGE & SHIPLEY POWERTURN MDL. 1610,18" x 30", 10" sw. over cross slide, pwr. to preselector head stock, spds.: 50-2,000 RPM, taper ...

HORIZONTAL HONING MACHINE, SUNNEN MDL. LBB-1810, pwr. stroking device, oil coolant system, Sunnen Mdl. LN650 hone tooling cabinet, wide selection ...

TOOL POST SET (10-PC) ALORIS MDL. CXA

TOOL POST SET (6-PC) ALORIS MDL. AXA

LOT OF LIVE & DEAD CENTERS (9), assorted (in one box) ...[more]

LOT OF LATHE DOGS, assorted (in one box)

LOT OF BORING BARS, assorted (in one box)

LOT OF INSERT TOOL HOLDERS, assorted (in one box)

LOT OF CARBIDE TIPPED & HIGH SPEED CUTTING TOOLS, assorted ...[more]

SURFACE GRINDER, MATTISON 20" X 48" DIE BLOCK, 20" under new wheel, incremental down feed, "travatrol" cross feed control, 20" x 3" wheel size, 15...

{ Choice of lots: 141, 142 } SURFACE GRINDER, GALLMEYER & LIVINGSTON MDL. 373, 12" x 24" automatic hyd. surface grinder, rebuilt in 2021 by Ameri...

{ Choice of lots: 141, 142 } SURFACE GRINDER, GALLMEYER & LIVINGSTON MDL. 373, 12" x 24" automatic hyd. surface grinder, rebuilt in 2021 by Ameri...

SURFACE GRINDER, PARKER MAJESTIC 6" X 18" HAND FEED, 1-1/2 HP direct drive spdl., 7" max wheel dia., pwr. elevation, walker fine line magnetic chu...

SURFACE GRINDER, PARKER MAJESTIC 6" X 18" HAND FEED, 1-1/2 HP direct drive spdl., 7" max wheel dia., pwr. elevation, walker fine line magnetic chu...

DUST COLLECTOR, TORIT DRYFLO

LOT OF GRINDING MANDRELS & GRINDING WHEELS, w/ cabinet, assorted ...[more]

VERTICAL ROTARY SURFACE GRINDER, BLANCHARD MDL. 36HD-66, w/ 72" electromagnetic chuck, 7/8" remaining chuck life, 32" segmented wheel, 150 HP whee...

VERTICAL ROTARY SURFACE GRINDER, BLANCHARD MDL. 22HD-42, w/ 42" electromagnetic chuck, approx. 1/2" remaining chuck life, 22" dia. segmented wheel...

RADIAL ARM DRILL, CARLTON 5' ARM, 13" COLUMN, spds.: 15-1,500, pwr. elevation, pwr. head travel, 62-1/2" x 36" x 20" T-slotted box tbl., S/N 3A3878

{ Choice of lots: 150, 151 } T-SLOTTED BOX TABLE, 30" x 24" x 20"

{ Choice of lots: 150, 151 } T-SLOTTED BOX TABLE, 30" x 24" x 20"

T-SLOTTED TABLE., 38" ht. x 31"W.

MECHANICAL SHEAR, WYSONG MDL. 1252, 12-ga. x 52" cap., rear operated back gauge, 2-front support arms, left-hand squaring arm, S/N P13-1149

HYDRO-MECHANICAL PRESSBRAKE, WYSONG MDL. H-2052, 20 T. x 52" cap., 2-1/2" stroke, 3" adj., 9" diespace, front operated 2-axis backgauge, foot peda...

CNC LASER, AMADA QUATRO CNC, new 7/2008, 4' x 4' sheet size, 2,000 watt Fanuc Mdl. AF2000E laser, 21,435 total resonator hours, Fanuc 16i-L CNC co...

BRIDGE TYPE MACHINING CENTER, AMERA-SEIKI MDL.VB-3, new 9/2011, Fanuc 0i-MD CNC, 65" x 126" tbl., 17,600 lb. max. weight, 126" X, 79" Y, 35" Z-axi...

4-AXIS VERTICAL MACHINING CENTER, DOOSAN MDL. MYNX 7500/50, new 4/2012, Fanuc 31i CNC, 29.5" x 63" tbl. size, 3.306 lb. max. weight, 63" X, 29.5" ...

4-AXIS VERTICAL MACHINING CENTER, DOOSAN MDL. MV5025/50, new 7/2007, Fanuc series 21i-MB CNC, 25.6" x 55.1" tbl. size, 2,200-lb. max. weight, 51" ...

4-AXIS HORIZONTAL MACHINING CENTER, DOOSAN MDL. HP4000II, new 5/2014, Fanuc 31i-Mdl.B CNC, 15.75" pallets, 4th axis tbl., 23.6" X, 22" Y, 23.6" Z-...

{ Choice of lots: 160, 161, 162, 163 } TOMBSTONE, 15.7" x 15.7" x 3" thk., 2-sided, drilled on 2" center, w/ (2) Kurt 6" machine vises

{ Choice of lots: 160, 161, 162, 163 } TOMBSTONE, 15.7" x 15.7" x 3" thk., 2-sided, drilled on 2" center, w/ (2) Kurt 6" machine vises

{ Choice of lots: 160, 161, 162, 163 } TOMBSTONE, 15.7" x 21.25" x 4"W., picture frame style, Mfg. Suburban Tool

{ Choice of lots: 160, 161, 162, 163 } TOMBSTONE, 15.7" x 21.25" x 4"W., picture frame style, Mfg. Suburban Tool

{ Choice of lots: 164, 165 } LOT OF CAT-50 TAPER TOOL HOLDERS (30), w/ Verti Kart, assorted

{ Choice of lots: 164, 165 } LOT OF CAT-50 TAPER TOOL HOLDERS (30), w/ Verti Kart, assorted

LOT OF CAT-50 TAPER TOOL HOLDERS (50), w/ Stanley Vidmar roller drawer cabinet, assorted

{ Choice of lots: 167 } LOT OF CAT-50 TAPER TOOL HOLDERS (50), w/ Stanley Vidmar roller drawer cabinet, assorted

LOT OF CAT-50 TAPER TOOL HOLDERS (12), assorted

LOT OF CAT-50 TAPER TAPPING HEADS (2), w/ collets

LOT OF CAT-40 TAPER TOOL HOLDERS (29), assorted

{ Choice of lots: 171 } LOT OF CAT-40 TAPER TOOL HOLDERS (27), assorted

LOT OF TOOL TIGHTENING FIXTURES (3), assorted

LOT OF TOOL HOLDER REPLACEMENT PARTS, assorted