LOT OF MACHINE PARTS, assorted (on six skids)

SINGLE SPINDLE DRILL, CLEEREMAN 24" HEAVY DUTY, 24" x 19" adj. ht. table

GANG STYLE DRILL PRESS, DELTA 16" 4-SPINDLE

GANG STYLE DRILL, LELAND GIFFORD 24" 2-SPINDLE, 22-1/2" x 40" adj. ht. table

UNIVERSAL HORIZONTAL MILL, MILWAUKEE MDL. 2, 12" x 56" table, dbl. swivel vert. head, S/N 26-3683

TURRET STYLE HYDRAULIC BARFEED, SPEGO 18' MDL. 512-20, S/N 403-13

ABRASIVE CUT-OFF SAW, MILWAUKEE 14", w/stand

BURR-OFF VIBRATORY DEBURRING UNIT, approx. 3 cu. ft., w/side dump & noise enclosure ...[more]

{ Choice of lots: 133, 134 } HEAT TREAT FURNACE, PARAGON MDL. HD22, interior dims: 13" ht. x 20-3/4"W. x 20-3/4" dp., elec. fired, 2,350 deg. F. ...

{ Choice of lots: 133, 134 } HEAT TREAT FURNACE, PARAGON MDL. HD22, interior dims: 13" ht. x 20-3/4"W. x 20-3/4" dp., elec. fired, 2,350 deg. F. ...

VERTICAL TURRET MILL, CHEVALIER MDL. FM-3VS, 9" x 48" table, long. pwr. feed, Sony 2-axis D.R.O., variable spd. head, Mitutoyo Quill readout, acco...

VERTICAL TURRET MILL, RAMCO MDL. RAMILL 1, 9" x 42" table, long. pwr. feed, belt driven head, spds: 80-2720 RPM, S/N 2041142

VERTICAL TURRET MILL, ENCO, 9" x 48" table, belt driven head, spds: 80-5440 RPM, long pwr. feed, 2-axis D.R.O., S/N 501888

VERTICAL TURRET MILL, SPEEDFORD, 9" x 42" table, belt driven head, spds: 80-2720 RPM, long. pwr. feed, Newall D.R.O., S/N 791367

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

{ Choice of lots: 154, 155, 156, 157, 158, 159, 160 } DOUBLE END PEDESTAL GRINDER, 6"

CNC LATHE, DOOSAN PUMA MDL. 300C, new 10/2013, Fanuc i Series CNC control, 23" sw. over bed, 15" turn dia., 27" btn. centers, 4" bar cap., 2,800 R...

CNC LATHE, DOOSAN PUMA MDL. 300C, new 9/2008, Fanuc i Series CNC control, 23" sw. over bed, 15" turn dia., 27" btn. centers, 4" bar cap., 2,800 RP...

CNC LATHE, DOOSAN PUMA MDL. 280, new 9/2010, Fanuc i Series CNC control, 34.8" sw. over bed, 16.6" turning dia., 25.9" turn length, 3.03" bar cap....

CNC LATHE, MORI SEIKI MDL. SL-35B, Mori Fanuc MFT4 CNC control, 20.5" sw. over bed, 10.2" max. turning dia., 30.7" max. turn length, 3.15" spdl. b...

CNC LATHE, MORI SEIKI DURATURN MDL. 2550, new 10/2006, Mori Seiki MSC-504 CNC control, 24" sw. over bed, 15" max. turning length, 3.6" spdl. bore,...

CNC LATHE, MORI SEIKI MDL. SL-25C/1000, Mori Seiki MSC-516 CNC control, 22.4" sw. over bed, 10.2" max. turning dia., 39" max. turning length, 3,50...

CNC LATHE, MORI SEIKI MDL. SL-25B, Mori Seiki MF-T6 CNC control, 22.4" sw. over bed, 10.2" max. turning dia., 20.9" max. turning length, 3.1" spdl...

CNC LATHE, MORI SEIKI MDL. SL-25B, Mori Seiki MF-T6 CNC control, 22.4" sw. over bed, 10.2" max. turning dia., 20.9" max. turning length, 3.1" spdl...

CNC LATHE, HAAS MDL. SL-20T, new 12/2005, Haas CNC control, 23" sw. over bed, 10.3" max. turning dia., 24" max. turning length, 2.5" spdl. bore, 4...

CNC LATHE, OKUMA CADET MDL. LNC8, OSP5000LG CNC control, 8" dia. 3-jaw thru hole chuck, 12 pos. turret hyd. tailstock, S/N B826 (out of service)

CNC CHUCKER, MORI SEIKI MDL. CL-153, new 2001, Mori Seiki MSG803 CNC control w/maps conversational programming, 20.15" sw. over bed, 19.29" max. t...

CNC VERTICAL MACHINING CENTER, HYUNDAI WIA MDL. F500 4-AXIS, new 8/2013, Fanuc i Series CNC control, 19-1/2" x 47-1/4" table, 43.3" X-axis travel,...

CNC VERTICAL MACHINING CENTER, MORI SEIKI MDL. SV-50/40, Mori Seiki MSC-518 CNC control, 23.62" x 43.31" table, 31.5" X-axis travel, 20.08" Y-axis...

CNC VERTICAL MACHINING CENTER, HAAS MDL. VF-2B, new 9/2004, 14" x 36" table, 30" X-axis travel, 16" Y-axis travel, 20" Z-axis travel, CAT-40, 10,0...

CNC VERTICAL MACHINING CENTER, OKUMA MDL. MC-4VAE, OSP5000LG CNC control, 20.08" x 39.37" table, 30" X-axis travel, 16.14" Y-axis travel, 17.72" Z...

{ Group of lots: 208, 209, 210, 211 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 208, 209, 210, 211 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 212, 213, 214, 215 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 212, 213, 214, 215 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 212, 213, 214, 215 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 212, 213, 214, 215 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 216, 217, 218, 219 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 216, 217, 218, 219 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 216, 217, 218, 219 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 216, 217, 218, 219 } LOT OF CAT-40 TAPER TOOLHOLDERS (10), assorted (in two boxes

{ Group of lots: 220, 221, 222 } LOT OF CAT-40 TAPER TOOLHOLDERS (12), assorted (in two boxes

{ Group of lots: 220, 221, 222 } LOT OF CAT-40 TAPER TOOLHOLDERS (13), assorted (in two boxes

{ Group of lots: 220, 221, 222 } LOT OF CAT-40 TAPER TOOLHOLDERS (12), assorted, w/rack

{ Group of lots: 223, 224, 225 } LOT OF RETENTION KNOBS, assorted (in three boxes)

{ Group of lots: 238, 239 } LOT OF TOOLHOLDERS (4) (for Doosan Mdl. 300)

{ Group of lots: 238, 239 } LOT OF TOOLHOLDERS (4) (for Doosan Mdl. 300)

{ Group of lots: 240, 241 } LOT OF TOOLHOLDERS (4) (for Doosan Mdl. 300)

{ Group of lots: 240, 241 } LOT OF TOOLHOLDERS (4) (for Doosan Mdl. 300)

{ Group of lots: 242, 243, 244, 245 } LOT OF TOOLHOLDERS (4)

{ Group of lots: 242, 243, 244, 245 } LOT OF TOOLHOLDERS (2) (for Mori Seiki Mdl. SL-35)

{ Group of lots: 242, 243, 244, 245 } LOT OF TOOLHOLDERS (2) (for Mori Seiki Mdl. SL-35)

{ Group of lots: 242, 243, 244, 245 } LOT OF TOOLHOLDERS (3) (for Mori Seiki Mdl. SL-35)

{ Group of lots: 246, 247 } LOT OF TOOLHOLDERS (5) (for Haas Mdl. SL-20T)

{ Group of lots: 246, 247 } LOT OF TOOLHOLDERS (5) (for Haas Mdl. SL-20T)