pallet

CTM In-Line Labeler, Model 3600-8485SE, SN 3600-0825-0508, with Sato m-8485SE Bar Code Printer, Mounted on 92" L x 29" H Power Belt Conveyor with ...

jacketed kettle, model F-40L, S/N 1716-OH-05, National Board number 2078, 26" diameter x 22" deep, 55 PSI at 350 degrees Fahrenheit maximum workin...

jacketed kettle, mod. F-20L, S/N 1970-OK-25, National Board number 2364, 21" diameter x 16" deep, 55 PSI at 350 degrees Fahrenheit maximum workin...

4" tall side walls, 8-1/2" wide x 9-1/2" long tapered product discharge chute, narrows to 8" wide x 8" long product discharge, adjustable belt scr...

2” X 1.5”, Tri-Clover fittings, stainless steel contact, 1.5hp 1725 rpm direct coupled drive, 115/208/1/60, model CPML56-SSQMT, S/N CP-3760. (LOCA...

x 90" long stainless steel fogging conveyor, open wire grid conveyor, with high pressure pump and plastic air pump, with catch pan, controls and a...

pump, S/N 9771052, 3" Tri-Clover infeed and discharge, 3 HP direct drive electric motor, 1710 RPM, wired 575/3/60, catalog number 131260.00, model...

83 plates, each plate is 16" wide x 52" tall, approximately 475 square feet heat transfer surface, 4" flanged fittings, stainless steel contact, m...

on 300 x 407 can size, 4" wide x 32" long magnet, 4" wide x 48" long belts, 1 HP electric motor gearhead drive, all stainless steel construction.(...

size number 6RIHD, 3" wide x 9-1/4" long top infeed, 3" threaded discharge, 7-1/2 HP electric motor drive, 1760 RPM, 208-230/460/3/60, all stainle...

diameter x 24” deep, 1-1/2 Tri-Clover sloped side bottom discharge, 4” flanged bottom side fitting, 1” threaded bottom side fitting, with hinged c...

[LOT] of (2) AB drive control panel, wall mount, with Powerflex525 packaged drives, 3hp, Nd duty, type 12 enclosure, cat no 24B-D6P0H304AA-ND-P6-S...

rotary piston filler, set up for 300 x 407 cans, 2-1/2" pistons, 7/16" nozzles, timing worm to star infeed, counter clockwise rotation, tangential...

jacketed kettle, mod. F-40L, S/N 1716-OH-01, National Board number 2074, 26" diameter x 22" deep, 1-1/2" Tri-Clover side bottom discharge, built ...

jacketed kettle, model F-40L, S/N 1716-OH-02, National Board number 2075, 26" diameter x 22" deep, maximum working pressure 55 PSI at 350 degrees...

threaded compressed air discharge, 20 HP electric motor belt drive, 1750 RPM, wired 230/460/3/60, available at 50 Hz, cast iron construction, stai...

vibratory shaker, 6” tall sides, solid pan, 38” high infeed, 31” high discharge, set up with rocker arms and a 1hp 230/460/3/60 Ajax shaker drive ...

conveyor, 34-1/2" wide x 12" long tapered side discharge chutes, 1 pneumatically operated diversion gate, 3 HP electric drive, all stainless steel...

kettle, 36" diameter x 30" deep, 2" Tri-Clover side infeed, 1-1/2" Tri-Clover side infeed, 3" Tri-Clover center bottom discharge, 3/4" threaded st...

mod. C328-MD-21TC, S/N 373541-05, 4" Tri-Clover infeed, 2" Tri-Clover discharge, 7-1/2 HP electric motor direct drive, 3505 RPM, wired 230/460/3/6...

capable of handling 52" wide x 46-1/2" tall maximum bins, 38" dump bay depth, 25" bin infeed height, 78" bin dumping height, stainless steel conta...

incline conveyor, 46-1/2" product infeed height, 60" product discharge height, 2" maximum product height, thermoplastic belting, 1/2 HP electric m...

pump, S/N TO549SS, 3" Tri-Clover fittings, 0.040" clearance, 7-1/2 HP Reeves variable speed drive, 45-450 output RPM, 1755 RPM input, wired 230/46...

table top conveyor, 32" container infeed and discharge height, 5 HP stainless steel electric motor gearhead drive, 1765 RPM, wired 208-230/460/3/6...

heat exchanger, 316SS, (100) 12” wide x 36” long plates, 300 square feet of surface area, 4” flanged medium ports, 3” flanged product ports, rated...

auger filler, stainless steel contact, 2" diameter auger, with drive and controls, S/N A-100489, 230/3/60 drive voltage, 110/1/60 control voltage,...

scale, 14 station with dual bucket setup, 4.5" x 5.75" upper buckets, 4.5" x 5" lower buckets, rigidized surfaces, with vibratory feeders, with co...

pump system, set up with a Sutorbilt GAEMBPA 4" rotary blower, inlet filter, exhaust muffler and a vacuum relief valve, S/N S206654, 230/3/60, mil...

hectoliter (300 liters) capacity horizontal wine press, 22" diameter x 58" long slotted tank with access port for loading and unloading, electric ...

stainless steel construction, 1.5” Tri-Clamp fittings, 3/4" pipes, manual ball valve on the inlet, 5hp 3500rpm 230/460/3/60 belt drive, sanitary b...

VC00003 Information from the seller: HYUNDAI 50D-9 DIESEL FORKLIFT *YEAR 2016, 5 TON LIFT* C/W SIDE SHIFT  . FORWARDS AND REVRSE ELECTRIC SHUTTLE...

Buhler /Ondrstroj equipment no.SLSA 3, s/n AS/1599, (2023) devac chamber, stainless, 10 bar shell design pressure, 0/280 degc, test pressure @18.6...

thermoplastic chain with 3" tall cleats every 6", 5" width between rails, 27" tall inlet, 120" tall discharge, rubber tire metering infeed, 36" lo...

jacketed kettle, model F-40L, S/N 2920-2A-06, National Board number 3681, 26" diameter x 22" deep, 55 PSI at 350 degrees Fahrenheit maximum workin...

down pump, rated at 600 RPM, maximum pressure 60 BAR/870 PSI, capable of 19 GPM, 1-1/2" threaded infeed, 1" threaded discharge, 12-1/2 HP electric...

currently set on 211 x 109 can size, 3" diameter pistons, 1" diameter valves and ports, can drop chute to star infeed, counter clockwise rotation,...

jacketed kettle, S/N 11481, 30" diameter x 25" deep with 10" straight wall, 40 PSI maximum allowable working pressure, 1-1/2" straight pipe center...

machine, 603 x 700 can size, manual container and cover infeed, manually operated can riser, electronic eye counters, control panel, 1-1/2 HP elec...

model 1991, S/N 240-SC, 40” wide x 48” long destoning section with (10) riffles, 6’5” overall length, with over flow infeed, mechanical rock clean...

pump, S/N 27117300, 3" I-line fittings, 7-1/2 HP electric motor gearhead drive, 1760 RPM, wired 230/460/3/60, 5.0:1 ratio gearbox, 0.0625" clearan...

wide x 6’ long with (21) rows of (14) rubber discs, adjustable height, set at 56” high, with a 1.5hp gearhead drive, 230/460/3/60, rubber discs re...

jacketed kettle, mod. F-40L, S/N 1716-OH-04, National Board number 2077, 26" diameter x 23" deep, 55 PSI at 350 degrees Fahrenheit maximum working...

jacketed kettle, mod. F-40L, S/N 2920-2A-08, National Board number 3683, 26" diameter x 22" deep, 1-1/2" Tri-Clover side bottom discharge, built i...

Manufacturing Inc. stainless steel conveyor, belt has 1/2" wide x 5/8" long perforations, 50" product infeed and discharge height, 1/2 HP electric...

jacketed kettle, model N60, S/N 58429A, 30" diameter x 25" deep with 10" straight wall, maximum allowable working pressure 100 PSI, 2" threaded ce...

capable of handling 52" wide x 37-1/2" deep bins, adjustable guard height with a maximum bin height of 49", 38" dump bay depth, 16" bin infeed hei...

model D35XKSTHFECF, 2.5” NPT x 1.25” NPT, rated to 36.5 gallons per minute and 1500 psi max, 20hp 230/460/3/60 1765rpm belt drive, stainless steel...

motion vertical form-fill-seal machine, belt pull down, with a Becker VT4-40 vacuum pump, powered film feed and film registration, 480/3/60, new i...

pump system, set up with a Sutorbilt GACMBPA 2.5" rotary blower, inlet filter, exhaust muffler and a vacuum relief valve, S/N U53216, 230/3/60, mi...

hot hold loop with (8) 48” diameter wraps, 4” threaded inlet (lower) with (2) 2” and (1) 3” threaded discharge ports, no discharge fitting, stainl...

3/16" circular cut spindle and an opposing feed drum, adjustable gap, with controls, originally set up with an Urschel feed hopper to a Syntron st...

12” wide flat top belts which extend from 7’ long to 12’ long, 64” infeed, 54” discharge, with a stainless steel .75hp 1750rpm 40:1 gearhead drive...

pump, S/N 97711051, 3" Tri-Clover infeed and discharge, 7-1/2 HP electric Varidrive motor, 1730 RPM, wired 575/3/60, stainless steel contact and b...

conveyor, model 30825-90, S/N 190524 324679, built 2010, 42” infeed and discharge height, 2 HP electric motor gearhead belt drive, 1755 RPM, 208-2...

steel table top conveyor, S/N 2837, 37-1/2" container infeed and discharge height, 3/4 HP electric motor gearhead chain drive, 1725 RPM, wired 230...

29-1/2" product infeed and discharge height, 1/2 HP electric motor gearhead belt drive, 1740 RPM, wired 230/460/3/60, all stainless steel construc...

chiller, (8) plate stations, (7) 45" x 96" dimpled refrigerant plates, two zone with catch pan and enclosure, with controls, control valves, liqui...

wide chamber, mounted to a bag take-away conveyor measuring 18" wide with a 36" of floor level flat section and 80" of incline, pneumatic ram reje...

control panel and blower skid assembly, with a Ring Compressor 10hp blower with air filter and a 2" sanitary discharge line, with control panel wi...

impeller infeed, currently set on 3/8" dice, all stainless steel construction, requires drive, cross cut blade, infeed hopper, top cover guard, ch...