FULL SYSTEM! READ NOTES BELOW 2014 DMG MORI SEIKI MULTI AXIS CNC LATHE, MODEL NT4250/1500SZ, SUB-SPINDLE, LOWER 12 STATION TURRET, FULL B AXIS MIL...
2013 DOOSAN DNM 500 CNC VERTICAL MACHINING CENTER, 9118 APPROX RUN TIME AS OF MAY 9 2024, 8,000 RPM SPINDLE, CAT40, 30 STATION SIDE MOUNT TOOL CHA...
Axelson 32"/100" Sliding Gap Bed Lathe ; 32" Swing Over Bed, 100" Swing in Gap, 12/16' Bed, 72" Centers, 6 to 555 Spindle Speeds, 28" 4-Jaw Chuck,...
Heald No. 74 Gap Bed Internal Grinder ; 20" Swing Over Ways, 60" Swing in Gap, 85" Extended Bed Length, 16" 4-Jaw Chuck, 32" Faceplate, Steady Res...
Hardinge HLV-H Dovetail Bed Lathe, 208v, 1.0hp, Ditron D60-2V Digital Readout Display, 6Ó Hardinge 3-Jaw Chuck, Assorted 5C Collets, s/n HLV-H-147...
2008 SHOPMASTER TRI-POWER PATRIOT/ELDORADO BRIDGEMILL, MILL AND LATHE COMBINATION MACHINE, S/N 08329, BT-30 SPINDLE, 3-AXIS, JENIX DSC803M DIGITAL...
1970 H.E.S. MACHINE LATHE 20" X 80", MODEL 550, S/N 11540 WITH 10" CHUCK, KEYED CHUCK ON TAILSTOCK AND STEADY RESTS
STEEL SHELF WITH LATHE TOOLING AND CONENTS TO INCLUDE BUT NOT LIMITED TO: STOCK TOOLING, DRILLS, MILLS, CHUCKS, CHUCK JAWS
ROCKWELL 15" FLOOR DRILL PRESS, 14" X 11" CAST TABLE, CAT. NO. 15-665, JACOBS 1/2" CHUCK
MACHINE ONLY! READ NOTES BELOW! 2014 DMG MORI SEIKI MULTI AXIS CNC LATHE, MODEL NT4250/1500SZ, SUB-SPINDLE, LOWER 12 STATION TURRET, FULL B AXIS M...
MORI SEIKI MR-1500 ENGINE LATHE, 20" X 120" CC, 12" 3-JAW CHUCK, TAILSTOCK, S/N 565
HAAS ROTARY TABLE, 18" CHUCK, 7" HOLE THRU, HAAS SERVO CONTROL
LEBLOND MAKINO BARON-60 TURNING CENTER, GE FANUC SERIES 21i-T CONTROL, 24" 3-JAW HYDRAULIC CHUCK, TRAVELS: 27" X 120", 4.62" HOLE TROUGH SPINDLE, ...
Miyano LE-41 CNC Lathe ; Fanuc O-T Control, Kitagawa OB210 Chuck, 12-Station Turret, Tailstock, Royal Filtermist, Chip Conveyor (Item 8) S/N L4100...
YUASA 550-006 ACCU-DEX SUPER SPACER 6-1/2" CHUCK, VERTICAL/HORIZONTAL
2000 OKAMOTO GRIND-X SURFACE GRINDER, MODEL ACC-618DX3, 6" X 18" MAGNETIC CHUCK, S/N 45551
2007 HAAS SL-20T TURNING CENTER, 8" CHUCK, 5C COLLET NOSE, TAILSTOCK, 10-STATION TURRET, 2.0" BAR CAPACITY, VOP-B, TOOL PRE-SETTER, 20 HP VECTOR D...
2005 HAAS SL-20TB TURNING CENTER, 10" CHUCK, 5C COLLET NOSE, TAILSTOCK, 10-STATION TURRET, 2.5" BAR CAPACITY, 30 HP VECTOR DRIVE, CHIP AUGER, APPR...
LOT - (2) JACOBS AND ALBRECHT 3/8" SPEED CHUCKS W/ CAT 40 HOLDERS
HITACHI SEIKI TF25 CNC MACHINE LATHE, S/N TF-25013, PART SETTER, 10" CHUCK, TAILSTOCK, 10 STATION TURRET, SEICOS LAMBDA 10 L CONTROL, MAYRAN CHIP ...
IN ORGINAL CRATE: HWR INOFLEX VT040 15"COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
IN ORGINAL CRATE: HWR INOFLEX VT040 15"COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
IN ORGINAL CRATE: HWR INOFLEX VT040 15"COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
Haas HRT210 Brushless 4th Axis Rotary Head w/ 8” 3-Jaw Chuck and Arbir Support (SOLD AS-IS - NO WARRANTY)
BOXED, OPENED BUT EXCELLENT CONDITION: HWR INOFLEX VD031 12" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX NEW: HWR INOFLEX VK 031 12" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
ORIGINAL BOX NEW: HWR INOFLEX VK 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
ORIGINAL BOX NEW: HWR INOFLEX VT 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
OPEN BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VT 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
OPEN BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VT 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
Clausing Turret lathe with 4 and 3 jaw chucks
OPEN BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VT 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
CAT-40 Taper ER32 Collet Chucks (8) (SOLD AS-IS - NO WARRANTY)
LOT - (2) HAAS 1.500 I.D. TURRET TOOL HOLDERS, W/ ER32 COLLET CHUCK
CAT-40 Taper ER16 Collet Chucks (6) (SOLD AS-IS - NO WARRANTY)
OPEN BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VT 026 10" COMPENSATING 4 JAW THROUGH HOLE POWER CHUCK
LOT - (2) HAAS 1.500 I.D. TURRET TOOL HOLDERS, W/ ER32 COLLET CHUCK
ORIGINAL BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
CAT-40 Taper ER16 Collet Chucks (7) (SOLD AS-IS - NO WARRANTY)
CAT-40 Taper Collet Chucks (9) (SOLD AS-IS - NO WARRANTY)
ORIGINAL BOX LIKE NEW EXCELLENT CONDITION: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
IN ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
CAT-40 Taper Collet Chucks (9) (SOLD AS-IS - NO WARRANTY)
IN ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
IN ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 021 8" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 016 6" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 016 6" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 016 6" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 016 6" COMPENSATING 4 JAW MANUAL CHUCK
ORIGINAL BOX: HWR INOFLEX VD 016 6" COMPENSATING 4 JAW MANUAL CHUCK
LOT - INSERT LATHE TOOLS, COLLET CHUCK, ETC.
R8 collet chucks and face mills
(2) MISC 8" 3 JAW CHUCKS - PREVIOUSLY USED WITH ROTARY TABLE
KITAGAWA 8" 3-JAW CHUCK, MODEL B208
BT-40 Taper Collet Chucks (11) w/ Flex Collets and Rack (SOLD AS-IS - NO WARRANTY)
Loading...
