Giddings & Lewis VTC-1600 CNC Vertical Boring Mill, Fanuc 160i-TB CNC Control, 63” Table Capacity, 78” Swing, 85” Under Ram Face, 68” Ram Stroke, ...
Giddings & Lewis VTC-1600 CNC Vertical Boring Mill, Fanuc 160i-TB CNC Control, 63” Table Capacity, 78” Swing, 85” Under Ram Face, 68” Ram Stroke, ...
Giddings & Lewis VTC-1600 CNC Vertical Boring Mill, Fanuc 160i-TB CNC Control, 63” Table Capacity, 78” Swing, 85” Under Ram Face, 68” Ram Stroke, ...
63” Schiess CNC Vertical Turning Center with Live Milling, Fanuc 15-M CNC Control, 63” 4-Jaw Chuck, 78” Swing, 76” Turning Height, 1-315 RPM, C-Ax...
Toshiba BTD-13R22 CNC Horizontal Boring Mill, Tosnuc 777 CNC Control, X-118”, Y-90”, Z- 63”, W-27.5”, 70.86" x 86.6" B-Axis Rotary Table , .001 De...
Used Matrix Pro Series 2085ZTR Vertical Form Fill and Seal with: All Fill B600 Auger Filler Allen Bradley 1500MLX PLC 16 gallon stainless steel...
Used Orion LPA Semi-Automatic Stretch Wrapper with: Output: up to 15 rotations per minute depending on product size Maximum wrapping height: ...
Cummins ISB 6.7L 250HP, Allison 3500RDS Automatic, Reads 81,840 Miles, 4x4, 14k Fronts, 21k Rears, 190" WB, 5.57 Ratio, 2015 Terex Hi Ranger 5TC-5...
Maxxforce DT 7.6L, Allison Automatic, Reads 45,680 Miles, 6x6, 16k Fronts, 40k Rears, 230" WB, 2011 Terex Commander C6000 VIN:1HTWJAAT0CJ550239
Cummins 6.7L, Automatic, Reads 156,927 Miles, 4x4, 7k Fronts, 13,500 Rears, 2018 Altec AT37G Bucket VIN:3C7WRNAL7JG291022
Cat 3126, 6 Speed, Reads 199,428 Miles, 158" WB, 10k Fronts, 21k Rears, IMT Air Compressor, IMT 6025 Crane, VIN:3FRNF75R46V250655 (253891)
Cummins ISX 500HP, Allison 4500HSAutomatic, Reads 560,075 Miles, 12k Fronts, 40k Rears, 189" WB, 4.33 Ratio VIN: 1FUJGEBG7GLHH3927 (256375)
Used Smipack Side Sealer with: Model: HS500E series with intermittent motion cycle can handle Polyolefin and Polyethylene, Polypropylene centerfol...
Used 500 Gallon Stainless Steel Tank with: Capacity: 500 gallons Manway diameter: 22 inches Discharge diameter: 2 inches Impeller agitation Mount...
Used Cretors FT-80F-E02 Hot Air Popper with: Infeed capacity for popcorn: 80 pounds per hour (of raw corn) Feed hopper: 24 inches long x 12 i...
Used Lutetia Marination Tumbler with: Capacity (approximately): Pounds: 2000 Liters: 900 Time cycles: 15 minutes to 1 hour per load Tumbler...
Used Mettler Toledo Safeline Metal Detector with: Aperture: Height: 10.5 inches Width: 7 inches Conveyor: Length: 46 inches Width: 5 inches ...
Used Delta 1000 1 Up Print Registered Stainless Steel Flow Wrapper with: Production speed: up to 60 ppm, depending on applicaiton and product ...
King 42" Vertical Turret Lathe, s/n 17333, 42" Universal Chuck, Dual Ram Heads
Mitsubishi Model FX-20 CNC Wire EDM Machine, New 1997, Mitsubishi CNC Control, Submerged Cut, 6" Riser Block, 19.69" X 13.77" X 18.11" Travels, 3....
Dear Valued Customers, As we prepare for our upcoming auction, we wish to provide you with some important information regarding the presentation o...
All Lots on this auction will have an assigned Handling fee, this covers the boxing of the lot. We do offer shipping quotes. If you are intereste...
IMPORTANT NOTICE: This is a Timed Online auction. Starting at lot 1 each lot lot will close 1 miute after the preceeding lot. Any lot that gets a ...
***Over 1000+ lot 2-day sale. Inventory still being added**** Unprecedented factory spares company complete liquidation. 10,000+ lots of electrica...
Used Case Erector and Bottom Glue Sealer with: Output rate: up to 55 cases per minute Erected case size range: Length: 12 inches to 23 inches W...
***Over 1000+ lot 2-day sale. Inventory still being added**** Unprecedented factory spares company complete liquidation. 10,000+ lots of electrica...
IMPORTANT NOTICE: This is a Timed Online auction. Starting at lot 1 each lot lot will close 1 miute after the preceeding lot. Any lot that gets a ...
Used PHOENIX CONTACT VIP-2/SC/FLK14/PLC PLC MODULE with: /Manufacturer: PHOENIX CONTACT /Classification: PLC Module /Condition: Used /Quantity: 10
REGISTRATION & INSPECTION: Deposit may be required for bidders before your registration can be approved. Deposits will run against the credit card...
Used BANNER ENGINEERING SM912LVQD SENSOR with: /Manufacturer: BANNER ENGINEERING /Classification: Sensor /Condition: Used /Quantity: 5
REGISTRATION & INSPECTION: Deposit may be required for bidders before your registration can be approved. Deposits will run against the credit card...
Used Lantech C-1000 case erector with: Manufacturer: Lantech Year: 2011 Model: C-1000 Serial: SM20104387 Automatic tape bottom case sealer 2 inch...
Miller Welder power source. Model Auto-Invision II. 3 phase 230/460v.
Used Automatic Labeler with: Automatic monoblock cold glue labelerPreviously ran 12 oz beer bottlesApplied front, back and neck labels24 labeling...
Full pallet - Qty 11 - Assorted safety disconnect boxes.
Miller Welder power source. Model Auto-Invision II. 3 phase 230/460v.
INVOICING & PAYMENTS: Invoices will be sent to all Buyers via email no later than 24 hours after the sale closes. An 18% Buyer's Premium will be c...
Full pallet - Qty 7 assorted safety disconnect boxes and starters.
Used Pearson BE60 6-Pack Beverage Carrier Erector with: Output rate: up to 60 cases per minute, depending on sizeChain driven beltOutfeed dimensio...
INVOICING & PAYMENTS: Invoices will be sent to all Buyers via email no later than 24 hours after the sale closes. An 18% Buyer's Premium will be c...
Used Tekkra T-220-40 Intermittent Motion Right Angle Infeed Bundler with: The intermittent motion Tekkra 200 contains and assists product throug...
Used MITSUBISHI HF-KP23 SERVO MOTOR with: /Manufacturer: MITSUBISHI /Classification: Servo Motor /Condition: Used /Quantity: 2
REMOVAL DETAILS: 7/22 - 8/22. All items must be removed no later than 8/22. Your Buyer Invoice will include additional removal details as well as ...
Used Point Five Tray Sealer with: Production speed: up to 20 cycles per hour depending on product and application 4 up Maximum tray depth: 4.7 in...
Used ATEN VS92A PLC MODULE with: /Manufacturer: ATEN /Classification: PLC Module /Condition: Used /Quantity: 10
REMOVAL DETAILS: 7/22 - 8/22. All items must be removed no later than 8/22. Your Buyer Invoice will include additional removal details as well as ...
Miller Welder power source. Model Auto-Invision II. 3 phase 230/460v.
Full pallet - Qty 7 assorted safety disconnect boxes and starters.
Used Accumulation Table with: Steel mesh conveyorInfeed height: 43 inches Conveyor dimensions: 96 inches wide x 60 inches longMotor: Horsepower:...
Full pallet - Qty 11 assorted safety disconnect boxes and starters.
Used Nedco Unscrambling Table with: Table dimensions: 50 inches wide x 60 inches long Working table height from ground: 37 inchesStainless stee...
Miller Welder power source. Model Auto-Invision II. 3 phase 230/460v.
Used BANNER ENGINEERING SM912LVQD SENSOR with: /Manufacturer: BANNER ENGINEERING /Classification: Sensor /Condition: Used /Quantity: 5
United Conveyor Corp. Knife Gate Valve - Size: 6"
Klockner Bartelt Horizontal Form, FIll & Seal Pouch Machine: Rotary turent horizontal form, fill & seal pouch machine 8 stations7.25 inch gripp...
Used MITSUBISHI HF-KP13 SERVO MOTOR with: /Manufacturer: MITSUBISHI /Classification: Servo Motor /Condition: Used /Quantity: 2
United Conveyor Corp. Knife Gate Valve - Size: 8"
Miller Welder power source. Model Auto-Invision II. 3 phase 230/460v.
Used Hayssen Ultima With: Output: up to 100 bags per minuteMinimum bag dimensions: Length: 3 inchesWidth: 2 inches Maximum bag dimensions: Len...