Auction closed

Sale dates


Viewing dates

  • 9am ET - 4pm ET
  • 9am ET - 4pm ET

Auction details

Currency: USD
Buyer's premium: 18.00%
Tax on hammer: 7.00%

Auction house details

Biditup Auctions Worldwide, Inc./Maynards Industries
248-569-9781; 517-204-0033
Visit website Add to favorites Ask a question

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 277 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 5

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Dake CB-330W Horizontal Band Saw 34'' l x 1.06T, 27-80 Blade Speed, 5-700mm, Feed Speed, 220V, 60 Hz, 3 Ph S/N CJ-331115 [Loc: Building 15 Tool Ro...

2011 Cessco SH-460M Horizontal Band Saw 3505mm Blade, 27'' L x .09T, 460 V, 2 P S/N 100046153 [Loc: Building 15 Tool Room ]

Do all M-L Vertical Saw 0-1600 Speed Indicator, 3510 Variable Transmission, 2260 Motor Pump, 3370 Motor To Variable, 120'' Max Saw Length, 120'' F...

Brown And Sharpe No. 5 Surface Grinder 10'' Wheel, 440V, 60Hz, 3 Ph, 60 Cycle, With 9''W x 24''L Magnetic Chuck (Dust Collector Not Included) S/N ...

Kent SGS-1020AHD Surface Grinder 8'' Grinding Wheel, 22.2'' Table, 19.7 Spindle To Table, 10.5'' Saddle Travel, 2Hp, 3500 Rpm With 9'' x 12'' Kane...

Burr King 760 Belt Grinder 1.5 HP / 120 volt / Single Phase, 800-8000 SFPM - Variable Speed, Dynamic Braking 3 Wheels, 7" x 1.5" Contact Wheel Siz...

Bridgeport Vertical Mill 36''x 9'' T-Slotted Table, 30'' Table Travel, 27-1/2'' Table Travel With Power Feed, 12'' Saddle Travel, 16'' Vertical Tr...

South Bend Lathe 2-9/16'' Spindle Bore, 18'' Swing Over Bed, 18-50 RPM, 11-1/4'' Swing Over Cross Slide, With Tool Post, 12'' 3-Jaw Chuck, And Tai...

Nardini Mascote Lathe 13-3/4'' Swing Over Bed, 7'' Swing Over Cross Slide, 19'' Swing In Gap, 35'' Distance Between Centers, 8'' Cross Travel, 4''...

Bickford Chip master 951 3' Radial Arm Drill 43'' Max Distance Spindle To Column, 9'' Column D¡a', 24'' Vertical Travel, 53''-15'' Spindle To Base...

Bliss 44198 60 Ton OBI Press 32'' W x 22 L Work Area, 13'' Between Gap, 2'' Stroke, 90 Strokes Per Min [Loc: Building 15 Tool Room ]

1997 Hannifin OGF-50 50-Ton Hydraulic Press 6'' Stroke, 2'' D¡a' Ram, 30'' W x 27'' L Table Size, 5 Hp, 2550 Max Psi, 460V S/N T-17880 [Loc: Build...

Custom Built Tube Former 15'' W Opening, 480V 5Hp Motor, 2000 Psi [Loc: Building 15 Tool Room ]

Haeger Insertion Press 24 Throat, 0-16,000 Psi, 2,200 Psi Max, With 8'' Bowl Feeder [Loc: Building 15 Tool Room ]

Cress Electric C123HP/PM4 Furnace 14'' W x 8'' L x 32'' Depth, 480 AC, 20 Amps, 2250 Degree Max Intermittent Temperature, 2000 Max Continuous Tem...

{ Group of lots: 16A, 16B } Cantilever Rack with Steel Inventory Located in Machine Shop

{ Group of lots: 16A, 16B } Rack with Steel Inventory Located outside of Machine Shop

Jet J-02550 20'' Floor Drill Press 10'' Throat, 5'' Stroke, 19'' W x 17'' L T-Slotted Height Adjustable Table [Loc: Honda Area Main Building ]

Clausing 20 2234 Drill Press 20'' Swing, 10 Throat, 6'' Stroke, 240V, 150-1800Rpm, With 86'' W x 29'['L Work Area [Loc: Honda Area Main Building ]

2016 Dake 350 14'' Cold Saw Rotating Base 43/4" Tube Capacity at 90 Degree, 41/8" Square Capacity at 90 Degree, 22/44/88 Speed S/N 01-00230 [Loc: ...

2012 Dake 350 14'' Cold Saw Rotating Base 43/4" Tube Capacity at 90 Degree, 41/8" Square Capacity at 90 Degree, 22/44/88 Speed S/N 1200805 [Loc: H...

Clausing Start rite 30RWH Vertical Band Saw 30" Capacity, Blade, 30'' Throat, .032'' Thickness, 21''W x 21'' L Table, 12'' Working height, 3/4'' M...

Do all 2013-V Vertical Band Saw 154'' Saw Band Length, 49'' W x 26'' L Table, 460V, 60 Hz, 2.8Amp, S/N 500-992271 [Loc: Welding Room Main Building...

{ Choice of lots: 23, 24 } Hydmech DM 12 Horizontal Band Saw 1" X 10'11" Blade, 2/2.5 HP Blade Drive, 480 V, 3Ph, 60Hz, 2.88 Hp, 156/312 SFM Blad...

{ Choice of lots: 23, 24 } Hydmech DM 12 Horizontal Band Saw 1" X 10'11" Blade, 2/2.5 HP Blade Drive, 480 V, 3Ph, 60Hz, 2.88 Hp, 156/312 SFM Blad...

MSC Vertical Band Saw 1.5ÿHP, 110V/230V, 1 Ph, 60 Hz, Prewired 110V. [Loc: Large Tube Area Main Building ]

{ Choice of lots: 26 } 2015 Marvel 8-Mark-II-V Vertical Band Saw 22'' x 18'' Capacity, 33''W x 24'' L, Table, 50-450 FPM, 0-140lbs. Feed, 14'6'' ...

{ Choice of lots: 27, 28 } 2019 Marvel 8-Mark-II-V Vertical Band Saw 22'' x 18'' Capacity, 33''W x 24'' L, Table, 50-450 FPM, 0-140lbs. Feed, 14'...

{ Choice of lots: 27, 28 } 2019 Marvel 8-Mark-II-V Vertical Band Saw 22'' x 18'' Capacity, 33''W x 24'' L, Table, 50-450 FPM, 0-140lbs. Feed, 14'...

2015 Marvel 8-Mark-II-V Vertical Band Saw 22'' x 18'' Capacity, 33''W x 24'' L, Table, 50-450 FPM, 0-140lbs. Feed, 14'6'' x 1'' x 0.35'' Blade, 46...

{ Choice of lots: 30 } 2016 Marvel 8-Mark-II-V Vertical Band Saw 22'' x 18'' Capacity, 33''W x 24'' L, Table, 50-450 FPM, 0-140lbs. Feed, 14'6'' ...

Bridgeport Vertical Mill 48''x 9'' T-Slotted Table, 30'' Table Travel, 27-1/2'' Table Travel With Power Feed, 12'' Saddle Travel, 16'' Vertical Tr...

Custom Built Pneumatic Press 6'' Throat, 6'' Stroke, On Mobile Cart [Loc: Large Tube Area Main Building ]

{ Choice of lots: 33, 34 } Custom Built Pneumatic Press 6'' Throat, 6'' Stroke, On Mobile Cart [Loc: Large Tube Area Main Building ]

{ Choice of lots: 33, 34 } Custom Built Pneumatic Press 6'' Throat, 6'' Stroke, On Mobile Cart [Loc: Large Tube Area Main Building ]

Custom Built Tube O.D. Roll Stamper, 8'' Stroke, 100 Psi [Loc: Large Tube Area Main Building ]

{ Choice of lots: 36 } Vaill 511 5'' End Former 5Hp Motor, Foot Operating Control With Mounted Jib Crane And 1/2 Ton Chain Hoist S/N 43 [Loc: La...

Vaill 511 4'' End Former Machine, 5 Hp Motor, Foot Operating Control With Mounted Jib Crane S/N 69 [Loc: Large Tube Area Main Building ]

Lot 39

Roll Stamper

{ Group of lots: 39, 40 (P) } Roll Stamper 8'' Stroke, 120 Psi, 115 V, With Foot Pedal Operating Control [Loc: Large Tube Area Main Building ]

Lot 40

Roll Stamper

{ Group of lots: 39, 40 (P) } Roll Stamper 8'' Stroke, 120 Psi, 115 V, With Foot Pedal Operating Control [Loc: Large Tube Area Main Building ]

8'' Stroke Notched Press, 120V, With Foot Pedal Operating Control [Loc: Large Tube Area Main Building ]

P-150 Dimplier Press 6'' Stroke, 3'' Throat, 120V With Foot Pedal Operating Control [Loc: Large Tube Area Main Building ]

Lot 43

Slapper Press

Slapper Press 5'' Stroke, 6'' Throat, 120V, With Foot Pedal Operating Control [Loc: Large Tube Area Main Building ]

MB 24'' Electric Motorized Bead Roller And Mobile Stand 22-33 Rpm With Foot Pedal Operation Control [Loc: Large Tube Area Main Building ]

MB 24'' Electric Motorized Bead Roller And Mobile Stand 22-33 Rpm With Foot Pedal Operation Control [Loc: Large Tube Area Main Building ]

Pines 4 6" Tube Bender Approximately 120" Travel, 3000 Psi, 480V, 3 Ph, 60 Hz, 37.8A With Schneider Electric Controller; SMT Rebuild S.O. 28949, ...

Pines 4 6" Tube Bender 120" Travel, 3000 Psi, 480V, 3 Ph, 60 Hz, 37.8A With Pines Electric Controller S/N 11435-05020 [Loc: Large Tube Area Main B...

Pines 4 6" Tube Bender Approximately 120" Travel, 3000 Psi, 480V, 3 Ph, 60 Hz, 37.8A With Schneider Control Screen; SMT Rebuild S.O. 28756, SMT T...

Eaton Leonard 2" Tube Bender Approximately 120" Travel, 3000 Psi, 480V, 3 Ph, 60 Hz, 37.8A; Schneider Screen; Bend Pro G2 Control [Loc: Honda Area...

Assorted Tube Bending Dies & Holders on two pallets [Loc: Large Tube Area Main Building ]

Eagle TC 2000 Tube Trim and Cut Machine Capacity 6" OD; Tooled for 5" OD: Allen Bradley PLC S/N 3506 [Loc: Large Tube Area Main Building ]

1996 GWS SZ500 Tube Sizer Capacity 4" S/N GMY2211 [Loc: Large Tube Area Main Building ]

{ Choice of lots: 50 (P) } 2018 Proto-1 RDM-8 Deburring Machine 0.125" - 8.0" Tube Diameter, 035" - Solid Rod Tube Wall, 480V, 3 Ph, 60 Hz, 2 Hp,...

{ Choice of lots: 51 (P) } Proto-1 RDM-200 Deburring Machine S/N 1201582 [Loc: Large Tube Area Main Building ]

{ Choice of lots: 52 (P) } Proto-1 RDM-2009 Deburring Machine S/N 11839 [Loc: Large Tube Area Main Building ]

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 5

Recently Viewed Lots