Sheetmetal & fabrication machinery, power presses, roll formers, paint plants, factory equipment, stock, etc. (subject to availability)
Auction closed
Timed auction

Auction dates

  • Ended Mar 05, 2020 4:41pm GMT

Viewing dates

  • 10am - 4pm GMT

Auction details

Currency: GBP
Buyer's premium: 16.00%
Sales tax: 20.00%

Venue address

Linden Close Great Torrington, Devon EX38 7AL United Kingdom

Auction house

Add to favorites Ask a question phone_in_talk +44 (0) 2380 461 643
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
503 item(s)
  • List
  • Grid
  • 503 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Ricoh 30 ton x 2000mm hydraulic upstroking press brake, model RGH 20-30, Hurco Autobend IV, power back gauge. (Any press or other bespoke tooling ...

Promecam 35 ton x 2400mm hydraulic upstroking press brake, model RG-2400-35.  (Any press or other bespoke tooling located or shown on this lot is ...

Hydrabend 50 ton x 8ft hydraulic downstroking press brake, serial no: 669, with individual punch tooling as lotted. (Any press or other bespoke to...

Cressex Hydrabend 60 ton x 9ft 4in hydraulic downstroking press brake, with individual punch tooling as lotted. (Any press or other bespoke toolin...

Promecam 1100mm hydraulic downstroking press brake, type RGO, serial no:1289. (Any press or other bespoke tooling located or shown on this lot is ...

Edwards 1250 x 3.5mm powered guillotine, model 3.5/1250, serial no: 823850255, power back gauge dimensioned front supports, and rear safety enclos...

Unbadged hydraulic 4 ram twin section 8 column through feed vertical press, with 2 x 400mm width x 1200mm in/out feed conveyors and power pack. (A...

Oliver hydraulic 14 stage duplex roll former with guarding *(please note: A work Method Statement and Risk Assessment must be reviewed and approve...

Oliver powered double ended straight folding machine, serial no: 31-6R-93, max band width approx 950mm, approx max length between bending heads 26...

All inclusive lots 13 to 15 including main control station *(please note: A work Method Statement and Risk Assessment must be reviewed and approve...

Oliver powered 14 stage roller former, serial no: 1432092.*(NB: this item has no CE marking.  The Purchaser is required to satisfy themselves as t...

Oliver powered 14 stage roller former, serial no: 12LD290.89 (12 stage) *(NB: this item has no CE marking.  The Purchaser is required to satisfy t...

Oliver powered 14 stage roller former, serial no: 12LD290.89 (12 stage)*(NB: this item has no CE marking.  The Purchaser is required to satisfy th...

Hounsell hydraulic single ram vertical press, approx 40 ton capacity, 20" x 14" table size. (Any press or other bespoke tooling located or shown o...

Oliver hydraulic twin duplex shelf, 12 & 14 stage roll former, serial no: 14 HDTH2383 *(please note: A work Method Statement and Risk Assessment m...

Oliver powered double end straight folding machine, max bend width 1400mm, approx max bend width between bendy heads 2400mm, fitted 300mm x 1500mm...

All inclusive lots 31 to 32 including main controller and guarding *(please note: A work Method Statement and Risk Assessment must be reviewed and...

Unbadged hydraulic adjustable twin head press, mounted on frame with power pack.*Please note: An electrical disconnection charge of £35 plus VAT w...

Unbadged hydraulic adjustable twin head press, mounted on frame with power pack.*Please note: An electrical disconnection charge of £35 plus VAT w...

Edwards 4mm x 250mm hydraulic corner notcher, model 4/250, serial no: 837850176, with Wander foot control.*Please note: An electrical disconnectio...

Femco hydraulic corner notcher, 200 x 200mm. *Please note: NB: this item has no CE marking.  The Purchaser is required to satisfy themselves as to...

Carbonini Glie straightening and cut to length machine, approx max width 450mm, with powered outfeed conveyor *(please note: A work Method Stateme...

Unbadged twin station rotating decoiler. *(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctionee...

HME 70 ton mechanical inclinable adjustable stroke power press, model LM70, serial no: 7473. (Any press or other bespoke tooling located or shown ...

Rhodes 75 ton mechanical inclinable adjustable stroke power press, model RF75, serial no: 16153. (Any press or other bespoke tooling located or sh...

Rhodes 75 ton mechanical inclinable adjustable stroke power press, model RF75, serial no: 15738, with fitted air cushion. (Any press or other besp...

Besoncon single station decoiler.*NB: This item does not comply with current health and safety standards regarding guarding and will require risk ...

Clarks single station decoiler, model VSR12E2M, serial no: 13828, capacity 500kg.*NB: this item has no CE marking.  The Purchaser is required to s...

Meritus 30kva spot welder, model 5002580, serial no: 28823, 250mm throat *(please note: A work Method Statement and Risk Assessment must be review...

Sciaky 25kva spot welder, model Rapid 25, serial no: 12325/1, 450mm throat. *(please note: A work Method Statement and Risk Assessment must be rev...

Unbadged horizontal bandsaw, approx 200mm capacity.*NB: this item has no CE marking.  The Purchaser is required to satisfy themselves as to the sa...

Unbadged vertical spindle rotary wire brush finishing machine.*NB: this item has no CE marking.  The Purchaser is required to satisfy themselves a...

HME 40 ton mechanical/inclinable adjustable stroke power press, model OP40, serial no: 12020. (Any press or other bespoke tooling located or shown...

Sweeney & Blocksidge M6 inclinable fixed stroke power press, serial no: A79341T (work condition unknown, spares or repairs only) ...[more]

Wagner ESB Powder Coating, through feed application tunnel, type: 3113714, serial no: 1372, 240v, approx length 4m, apperture size approx 1500mm x...

Gema Volstatic type APS-2 12 rack applicator control unit, serial no: 8601079. *(please note: A work Method Statement and Risk Assessment must be ...

Powered throughfeed transfer conveyor system, approx total length 50m, including circa 12 steel pillar supports, with Fenner Speed Ranger 2030 adj...

Airflow Product Finishing throughfeed 2 stage pre-treatment plant, with control and extraction to atmosphere, approx total length 12m, width 2m, a...

Airflow Product Finishing throughfeed 2-pass drying/curing oven, approx 6 x 3m, with twin ceiling mounted fans and Satronic MMG810.1 gas fired hea...

All inclusive lots 60 to 64. *(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to a...

Throughfeed 3-stage pre-treatment plant, approx length 11m, width 2m, with twin treatment storage tanks, Calorex 510 fluid pump, steel frame and e...

Thorid throughfeed 4-pass drying oven, approx dimensions 12 x 3.5m, apperture size 270 x 550mm, access ladder and gantry, two side access doors, w...

Thorid throughfeed application tunnel with cyclone extraction and twin box collector, mounted on steel skid frame and floor mounted rails, approx ...

Gema Volstatic powder paint spray system including 2 x control cabinets, 2 x vertical reciprocating spraying arms and 16 x spray guns including in...

KEK powder doser.*(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal w...

Thorid throughfeed application tunnel with cyclone extraction and twin box collector, mounted on steel skid frame and floor mounted rails, approx ...

Gema Volstatic powder paint spray system including 2 x control cabinets, 2 x vertical reciprocating spraying arms and 16 x spray guns including in...

KEK powder doser.*(please note: A work Method Statement and Risk Assessment must be reviewed and approved by the Auctioneer prior to any removal w...

Thorid throughfeed 2-pass curing oven, approx dimensions 10 x 3m, with roof mounted fans and extraction ducting to atmosphere (x3), apperture widt...

Powered throughfeed transfer conveyor system, approx total length 140m, including circa 20 uprights, approx height 4m - 6m*(please note: A work Me...

All inclusive lots 69 to 74 (Thorid powder coating plant)*(please note: A work Method Statement and Risk Assessment must be reviewed and approved ...

Gem Volstatic vertical reciprocating spraying arm.*Please note: A work Method Statement and Risk Assessment must be reviewed and approved by the A...

Loading...Loading...
  • 503 item(s)
    /page

Recently Viewed Lots