Refine your search

Auction Details

Tenneco Automotive Day 2 - Assets No Longer Needed For Continuous Operation

Levy Recovery Group Timed Online Auction Ended Nov 07, 2019 2:33pm ET (7:33pm GMT)

Sale Date(s)

  • Ended Nov 07, 2019 2:33pm ET (7:33pm GMT)
Smithville, Tennessee

Venue Address

  • 645 E Broad St
  • Smithville
  • Tennessee
  • 37166
  • United States

Auction Details

Important Information Terms and Conditions Print Catalog
Currency: USD
Buyer's premium: 18.50%
Tax on hammer: 9.75%

Auctioneer Details

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 99 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

456P Welder Power, Miller, 60M Wire drive/ Weld Control, 439 Ti 0.045 Dia Electrode Size/ Type, 12'' x 30'' Torch Type, 54'' Long Cable, Tweco R44...

456P Welder Power, 12'' x 30'' Torch Type, 54'' Long Cable, Tweco R44-3545-8 Torch Cable Liner, 5/8'' Tip To Work Distance, 98% Argon/ 2% Oxygen G...

456P Welder Power, 12'' x 30'' Torch Type, 54'' Long Cable, Tweco R44-3545-8 Torch Cable Liner, 5/8'' Tip To Work Distance, 98% Argon/ 2% Oxygen G...

Single Torch 45 degree Inclined- Axis, Upper And Lower Fixture Frame, 456P Welder Power, Miller, 60M Wire drive/ Weld Control, MXA430 0.045 Dia El...

320 Work Hr. 300.000 A Interrupt Rating, 26 FLA, 21 A. Largest Motor FLA, 0.070 Sec Machine Stop Time, 460 V, 60 Hz, 21 KVA, S/N. J107716.

732 Work Hr. 1500 Psi, 300.000 A Interrupt Rating, 26 FLA, 21 A. Largest Motor FLA, 0.070 Sec Machine Stop Time, 460 V, 60 Hz, 21 KVA, S/N. J10771...

480 V, 1 Phase, 6 A, LJP Fuse Type, S/N. KB7027 ...[more]

3 1/2''-4'' Tool Sizer, 480 V, 3 Phase, 60 Hz, 20.88 Amps Max. Current, 15 Hp Motor 3 Phase, 480 v, 1/4 Hp, 1 Phase, 120 V, Maple System Electroni...

3 1/2''-4'' Tool Sizer, 480 V, 3 Phase, 60 Hz, 20.88 Amps Max. Current, 15 Hp Motor 3 Phase, 480 v, 1/4 Hp, 1 Phase, 120 V, Maple System Electroni...

3 1/2''-4'' Tool Sizer, 480 V, 3 Phase, 60 Hz, 20.88 Amps Max. Current, 15 Hp Motor 3 Phase, 480 v, 1/4 Hp, 1 Phase, 120 V, Maple System Electroni...

12'' Disc Grinding Wheel, 17'' x 9'' 90 Degree Tilt Table, 230-460 V, 2 Hp, 7/3.5 Amps, 1725 RPM, 60 Cycle.

3 1/2''-4'' Tool Sizer, 480 V, 3 Phase, 60 Hz, 18.72 Amps Max. Current, 5 Hp Motor 3 Phase, 480 v, 1/4 Hp, 1 Phase, 120 V, Maple System Electronic...

3 1/2''-4'' Tool Sizer, 480 V, 3 Phase, 60 Hz, 29.08 Amps Max. Current, 20 Hp Motor 3 Phase, 480 v, 1/4 Hp, 1 Phase, 120 V, Maple System Electroni...

37'' x 70'' 480 V, 3 Phase, S/N. 25962-0523.

480 V, 90 Psi. With Red Lion, G310, Digital Read Out 24 V, 26 Watts.

65'' x 32'' Work Area, With Superior Control

21.7 PSI. Set At 150 KPA, Dual Cycle Start, S/N. 6138/39

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps.

Tooling Ball 1 ( X=801776) (Y= 102.0880) (Z= 1007.3473) Tooling Ball 2 ( X= 829.6134) (Y=251.9328) (Z= 456.9061) Tooling Ball 3 ( X=120.0426) (Z =...

Nema Class 1, Output 100% Duty Cycle, 62 Max. O.C.V. 400 Amps, 36 V, Input 3 Ph, 60 Hz, 230-460 V, 56-28 Amps, At 400 Amps, 36 V, S/N. AC 752063.

36'' x 21'' x 85'' with Light 115V, 25 Amps.

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps, S/N. 1849. With Jib Crane Attachme...

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps, S/N. 2092.

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps S/N. 2876.

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps S/N. 1766, With Jib Crane Attachmen...

5'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps S/N. 1874.

116.144 Total Cycles Hr. 480 V, 30 Amps, 3 Ph. With Allen- Bradley Panel 550 Display Screen, Abell-Howe 1/2 Ton Jib Crane, S/N. 72902-2, And 2 Ton...

1200-1500 Psi. 460 V, 3 Ph, 60 Hz, 21 Kva, 26 A Largest Motor FLA, 0.070 Sec Stop Time, 39'' Laser Curtin's, With Allen- Bradley, Control Panel Vi...

3500 P.A.E. Port, 1000 Psi. 250 T-Port, 70 Bar, 120-110 Vac, 50/60 HZ.

With Miller Cool mate 4 Water Cooler System, 115 V, 5.2 A, 1 Ph, 50/60 Hz,

3'' Cylinder End Cap, 5'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps S/N. 1482. With Jib Crane Attachmen...

26 FLA, 460 V, 3 A, 60 Hz, 21 KVA. 300.000 A Interrupt Rating, 21 A Largest Motor FLA. S/N. J107742-J107742-4, With Allen- Bradley Panel View 300 ...

1/8'' Gap And Tighten Handles, 3'' Gap Between Shaft And Collar, 20mm Air Cylinder Bore x 2'' Stroke, 2 1/2'' Dia Drive Roller, 15 Tooth Sprocket ...

Input 230/460 V, 50.8/27.8 Amps, 19.2 KW, 3 Phase, 60 Hz, Output 95 Max. OCV 38 V, 450 Amps, 100% Duty Cycle. S/N. LC093297. With 18'' x 28'' x 52...

Lot 44

Robotic Arm

Disassembled Parts Only

Output 40 % Duty- Cycle, 250 A, 16 V, Output 2 x 1 ~ 60 Hz, 15 A, X= 100 % 115 V AC. S/N. ME060333L

2984 Psi. 200 Gal. 44'' x 33'' Bed 28'' Stroke Height. LOADING NOT INCLUDED  ...[more]

3'' Dia Tool Insert, 480 V, 60 Hz, 10 Hp, 3 Ph.

6 Axis, 570 Kg Mass, Servo Motor 200 V, 6A, 5.49 N-.m 2000 min.

48'' x 44'' x 74'' (Without Tooling) ...[more]

1Ph, 2 Pole, 2 Hp, 60 Hz, 110-220 V, 24/12 A, E Cycle, 3450 RPM

With Miller Welding Attachment, And Yasnac, mdl. XRC Control Panel, 3 Ph, 50/60 Hz, 1.5 KVA, S/N BY8206-0091-1.

With Miller Welding Attachment Without Torch, And Yasnac, mdl. XRC Control Panel, 3 Ph, 50/60 Hz, 1.5 KVA, S/N BY8206-0091-1.

116'' x 56'' Aluminum Plate

6'' Dia Tool Insert, Cylinder End Cap, 6'' End Caster, 480 V, 3 Phase, 60 Hz, 10 Hp, 120 Control Volts, 24DC, 18.5 FLA, 30 Amps S/N. 1482. With Ji...

45 Degree Head Tilt Both directions, 14'' x 20'' Rectangle Capacity at 90 degrees 2Hp Motor. 70-400 Feet Per Min,155'' Blade Length, 14 -32 90 Deg...

6 Axis, 570 Kg Mass, Servo Motor 200 V, 6A, 5.49 N-.m 2000 min.

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Recently Viewed Lots