Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

Auction Details

Marysville Metal LLC, Atlantic Tool Inc (Tool & Die Shop Facility) and Other Surplus Equipment

Levy Recovery Group Machine Tools & Equipment Timed Online Auction Ended Jul 23, 2019 5:57pm EDT (10:57pm BST)

Sale Date(s)

  • Ended Jul 23, 2019 5:57pm EDT (10:57pm BST)
  • Bloomfield, Michigan

Venue Address

  • MULTIPLE LOCATIONS
  • SEE IMPORTANT INFORMATION
  • Bloomfield
  • Michigan
  • 48302
  • United States

Auction Details

Important Information Terms and Conditions Print Catalog
Currency: USD
Buyer's premium: 18.50%
Tax on hammer: 6.00%

Auctioneer Details

There are 356 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 6

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Table Working Surface 6" x 20" Maximum Table Movement 20.8" x 6.9" Maximum Distance Between Wheel & Table 11.7" 2860 Rpm Wheel Speed, With 6"x18" ...

(X-Travel 24-3/8'') (Y-Cross feed Travel 6-3/4'') 9'' Wheel, 460 V, 3Ph, 60 Hz, 8 FLA. Motor 4 Amps, 2860 Rpm, 18'' x 6'' Magnetic Chuck, With Açu...

18”Max Grinding Length,6'' Max Grinding Width, 18'' Distance Table to Spindle Centerline, 7” x ¾” x 1 ¼ Max Grinding Wheel, Grinding Wheel Speed 3...

8’’ wheel, 6? x 18? Table Size, 18? Maximum Grinding Length 6? Maximum Grinding Width, 18? Maximum Distance from Table Surface to Spindle Center ...

3Ph, 60Hz, 200-230/460 V, 300 Amps, S/N. HJ212806, With Miller mdl. 10E Wire Feeder. (Tank Not Included)

45’' Arm, 1-3/4’’ Drilling Capacity, 20’’ x 25’’ x 17’ H Box Table, 5 HP Spindle rive Motor, 32’ Horizontal Drill Head Travel, 27’’ Vertical Arm T...

6 " Quill Travel, 325-2,000 RPM Variable Spindle Speeds, Separate High/Low Speed Control. 24" x 40" Table Working Area, 34" Distance Floor to Tabl...

14’’ X - AXIS TRAVEL, 12’’ Y - AXIS TRAVEL, 9.8’’ Z - AXIS TRAVEL, 16’’x 8’’ Table, 3 Ph, 440 V, 50/60 Hz, 14000 Amps,

100 KVA, 19’’ DEPTH OF THROAT 11’’GAP, 220 V, 60Hz, 3 Ph, 60 Hz, S/N. 76C3, With Weltronic/ technitron, mdl. WT 500, Welding Control, 480 V, S/N. ...

32'' Between F-B, 23'' Between L-R, 40'' x 31'' Table

Air Cushion, 2'' Stroke , 20’’x 75’’ Area Of Ram, 4’’ Adjustment Of Ram, 14’’ Opening Between Uprights Front To Back, 80’’ Opening Between Upright...

130 Ton, Straight Side Press 84" x 48" Bed, 14" Stroke, 28" Shut Height, 6" Adjustment

Lot 16

Coil Cradle

4,000 Lb. Max Width, 10" Max 36'' Coil OD, 220 V.

250 Ton Capacity, 12'' Stroke, 18'' Stroke Per Min, 8'' Slide Adjustment, 80 lb. Pressure Operate Clutch, 29'' Shut Height Stroke Down Adjustment,...

4,000 Lb. Max Width, 10" Max 36'' Coil OD, 220 V.

4,000 Lb. Max Width, 10" Max 36'' Coil OD, 220 V.

With Contents To include Assorted Drill Bits

with Contents To include Assorted Heavy-Duty Drill Bits

200 Psi,5055 Hr. With Westinghouse Ac Motor25 Hp, 1765 Rpm, 284T-Frame, 3 Ph, 60 Hz, 230/460 V.

To Include Fuller, 5'' Bench Vise

TOSNOC 888 CNC CONTROLS, 5.12” BAR SIZE, 118.1” X, 90.6” Y, 63” Z, 27.56” W, 2500 RPM., CAT 50, 40 HP., FULL 4TH AXIS ROTARY TABLE ( 0.001 DEGREE ...

8’ ARM, 19” Column, 1500 RPM, No. 6 MT, 20 HP., POWER RAISING & LOWERING OF ARM, POWER CLAMPING TO HEAD & ARM, 48” X 30” X 24” TALL “T” SLOTTED P...

TRIPLE STAGE MAST, 6-CYLINDER ENGINE, 48" FORKS, PROPANE FUEL GAS ENGINE, FOAM TIRES, AUTOMATIC TRANSMISSION, RUNS & DRIVES GREAT Location: Dry...

MODEL: 904-20,29.5” X 16” TABLE, TRAVELS: 20”X, 16” Y, 20”Z, RAPID TRAVERSE RATE: 400 IPM, SPINDLE SPEED: 5000 RPM (MAX.), SPINDLE TAPER: CAT 40,...

CATALOG # TS35T, MODEL: TS35-JT, VOLTS: 110/220/440, AMPS: 45 HIGH, LOW 104, KVA: 19 - 37, RPM: 1800, EQUIPPED WITH: DIESEL ENGINE ( CATERPILLAR ...

capacity of 26K (Gross wt., approx. 110K Odometer mileage) additional with a Flatbed Trailer, Vin#1GBJ7H1B6YJ517232 - Dryden, MI

Models:TPT-CGD-5058, TPT-2000 Controls, 60” x 108” Tables, 80,000 lb. Load Capacity, X=108”, Y=60”, Z=30”, Drilling Capacity: .25” to 2”, 84” dril...

Maximum Swing:17.32 In , Swing Over Carriage: 10 In, Maximum Cutting Diameter....10.62 In, Maximum Machining Length...16.75 In, Maximum Bar Work S...

Specifications: Collet Nose 5C, Max. Cutting Diameter 6", Max. Bar Diameter 1.06", X-Axis Travel 12", Z-Axis Travel 9", Spindle Speed 100 - 4000 R...

MODEL: 6 X18, YEAR: 1980’S, GRINDING CAPACITY: 6" X 18", WHEEL SIZE: 7" X 1/2 X 1-1/4", SPINDLE TO TABLE MAX: 14-3/4", SPINDLE: 1-1/2 HP, SPINDLE ...

Collet Nose: 5C, Max. Cutting Diameter: 6", Max. Bar Diameter: 1.06", Equipped With: Fanuc OT-CNC Control, 8 position Turret , Parts catcher, Flo...

Designed to perform many material handling applications, the FANUC M-16iB/20 features a payload capacity of 20 kilograms. It has servo driven moto...

Table Size: 27.6" x 12", Table Load Capacity: 770 lbs., X-Axis Travel: 24", Y-Axis Travel: 12", Z-Axis Travel: 18", Spindle Taper: CAT 40, Spindle...

Travel: X-Axis 18.9" Y-Axis 14.2" Z-Axis 10.6" Table Size 23.6" x 11.8" Spindle Speed 10 - 10,000 RPM Spindle Taper BT 30 Spindle Nose to Table To...

Max. Swing: 19.7", Maximum Turning Diameter: 15", Swing Over Carriage: 6.5", Max.Bar Working Dia.: 1.54", X-Axis Travel: 15.7", Z-Axis Travel: 9.8...

5' X 15" INCLUDES DC CONVERTER BOX