Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Auction Details

Day 2 - Surplus To The Needs Of Kimberly-Clark's Spunbond and Meltblown Nonwovens Operation

Active Marketing Auctions, LLC Extruders, beams, resin handling, embossers, slitting sections, unwinds/rewinds, material handling, chillers, cooling towers, blowers, plant support. Timed Online Auction Ended Nov 14, 2019 2:25pm CST (8:25pm GMT)

Sale Date(s)

  • Ended Nov 14, 2019 2:25pm CST (8:25pm GMT)
Multi-location - see lot details
  • Graniteville, South Carolina
  • Mobile, Alabama
  • Neenah, Wisconsin

Venue Address

  • 1111 Henry Street
  • Neenah
  • Wisconsin
  • 54956
  • United States

Auction Details

Important Information Terms and Conditions Print Catalog
Currency: USD
Buyer's premium: 15.00%
Tax on hammer: 5.00%

Auctioneer Details

There are 302 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 6

Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.

Foremost model LWB-9 9-component loss and weigh blender, air conditioned enclosure with Allen-Bradley ControlLogix PLC and Panelview 1000 HMI, sp...

National Bulk Equipment model 29-950 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: E501650056-1 Rigging...

National Bulk Equipment model 29-950 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: E501650056-1 Rigging...

National Bulk Equipment model 29-950/300/188 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: 600960065-3 ...

National Bulk Equipment model 29-950 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: 6016083-1 Rigging/Lo...

National Bulk Equipment model 29-950/300/188 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: 600960065-1 ...

2009 Corbett Industries 3.2 million BTU/Hour natural gas fired process air heater with Honeywell burner control, MSA gas sensor panel and callibra...

Foremost model DH-2 hot air dryer. 460V, 3 Phase, 60 Hz. S/N: 35833 Rigging/Loading Fee: $50

7.5 HP vacuum power unit (vacuum pump) with 7.5 HP AC motor (460V, 3 Phase, 60 Hz), Roots model 45 U-RAI, muffler. Rigging/Loading Fee: $50

2009 Foremost polymer resin drying system with Foremost model DH-12S hot air dryer (5 HP blower, S/N 43902), ~100 cubic foot drying hopper, Foremo...

2009 Foremost polymer resin drying system with Foremost model DH-12S hot air dryer (5 HP blower, S/N 43903), ~100 cubic foot drying hopper, Foremo...

Vacuum power unit with 7.5 HP AC motor (230/460V, 3 Phase, 60Hz) Roots 45U-RAI rotary lobe blower, filter housing, and muffler. Rigging/Loading Fe...

Premier Pneumatics DBD Dryer model HA500 Hot Air Heater with air intake filter. S/N: D7199 Rigging/Loading Fee: $100

Foremost model DH-2 hot air dryer. 460V, 3 Phase, 60 Hz. S/N: 35834 Rigging/Loading Fee: $100

Egan 6" extruder (30:1 L/D) with 400 HP AC Motor (motor rebuilt in 2018), Philadephia gearbox, electrically heated (5 zones), water-cooled, receiv...

Barmag 4.5" extruder (34:1 L/D) with 150 HP Reliance AC motor (460V/3 Phase, 60 Hz), electrically heated (7 zones), water-cooled, receiver with sl...

Marley NC Series 500 ton stainless steel cooling tower with reservoir heater and heater control panel. S/N: NC7222SM 126531-002-98 Rigging/Loadin...

Foremost model DH-4 hot air dryer with 2 HP blower - Portable on caster wheels. Maximum design temperature of the DH-4 dryer is 325° F @ 550 CFM. ...

76" Fife Kamberoller Edge Guide with 80" face x 8.5" diameter roll, model E1008-1A4A 1 HP hydraulic power unit, model CDP-01-H controller, model S...

Automatic Handling X-Y-Z C-Hook roll handling system for 60" diameter rolls with PowerLift, 4" diameter stub shaft, and roll clamp. Operator contr...

Automatic Handling vertical roll lift with conveyor and vertical roll lift gate. ~13.5 ft vertical lift distance. Dimensions: 90" W x 75" D x 20' ...

Automatic Handling roll kicker. Rigging/Loading Fee: $200

National Bulk Equipment model 29-950 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: 8038182-1 Rigging/Lo...

National Bulk Equipment model 29-950 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. Rigging/Loading Fee: $50

2.5" Johnson Plastics Machinery extruder (50 HP) on carriage with melt blown die and air lips. 5 zones of heat on barrel. 1 zone of heat each on a...

2.5" Johnson Plastics Machinery extruder (50 HP) on carriage with melt blown die and air lips. 5 zones of heat on barrel. 1 zone of heat each on a...

2.5" Johnson Plastics Machinery extruder (50 HP) on carriage with melt blown die and air lips. 5 zones of heat on barrel. 1 zone of heat each on a...

Foremost day bin with vacuum receiver and sliding gate valve and paddle mixer and distribution box. Day bin volume approximately 40 cubic feet and...

Foremost ~16 cubic foot vacuum receiver with sliding gate valve. Rigging/Loading Fee: $250

Foremost ~16 cubic foot vacuum receiver with sliding gate valve. Rigging/Loading Fee: $250

Hyster W40Z 4,000 lb. electric pallet truck with 48" x 6.5" forks. 24 volts, 200 amp hours maximum. S/N: B218N12725E Rigging/Loading Fee: $25

Goulds Pumps model 3196 XLT-X Centrifugal Pump size 6 x 8 - 13 with 12.125" impeller and 75 HP AC motor. 460V, 3 Phase, 60 Hz. S/N: 231C554 Riggi...

100 HP Spencer Power Mizer Series 3500 model CS32R561AA1 2-stage centrifugal pressure blower. 460/3/60 110 Amps. S/N 803748 K03 Rigging/Loading Fe...

Foremost Vacuum Purge (~16 cu.ft.) with Dust Collection Sock Rigging/Loading Fee: $75

Foremost Vacuum Purge (~16 cu.ft.) with Dust Collection Sock Rigging/Loading Fee: $75

Lot 353

Vacuum Receiver

~ 20 cu. ft. vacuum receiver with sliding gate valve. Rigging/Loading Fee: $100

National Bulk Equipment model 29-950/300 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. S/N: 9009138 Rigging/...

National Bulk Equipment model 29-950/300 bulk container tilt table for totes, gaylords, boxes, and bulk material surge bins. Rigging/Loading Fee: ...

~84" x 72" x 108" perforated receiver with three (3) 12" inlets and 28" x 32" outlet. Rigging/Loading Fee: $500

2007 IPS Model V-606-HD Vertical Baler with 10 HP motor and 6" main cylinder. Bale Size: 60" x 30" x 48". Rigging/Loading Fee: $1100

IPS Harris AT-752-20R Auto Tie Baler With Gaylord Box Dumper with 7" main cylinder, 20 HP main motor, 4" x 50" Charge Box Opening. Serial Number:...

Box dumper and 84"x 84" auger bin. 1/2 HP auger motor. 5 HP dumper hydraulic power unit. Control cabinet with 5 HP drive. Safety guard fence. Ri...

Kalamazoo Packaging Systems Model 6110HFA-CW Cocoon Roll Wrapper; a 6,000 lb. capacity fully automatic cocoon roll wrapper, equipped with high pr...

Kalamazoo Packaging Systems Model 6110HFA-CW Cocoon Roll Wrapper; a 6,000 lb. capacity fully automatic cocoon roll wrapper, equipped with high pr...

2-ton Contrx Industries overhead crane with two (2) Coffing 1-ton chain hoists. ~27' rails and 25' span. Includes pendant and remote control. Rig...

York model YCM-106X108-FD-CC-AC24-RF air handling unit with coils for heating or cooling and 75 HP size 330 Chicago Blower. 460/3/60 - 30 A. S/N:...

2-Door Enclosure with Allen-Bradley PLC and components. Rigging/Loading Fee: $100

Quickdraft trim blower with 6x12 venturi and 40 HP AC motor (230/460v/3/60), air intake silencer. Rigging/Loading Fee: $250

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Quickdraft trim blower with 6x12 venturi and 40 HP AC motor (460/3/60), air intake silencer. Rigging/Loading Fee: $250

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Buffalo Forge Company size 730 centrifugal fan with 100 HP AC motor (460/3/60). Class: 3. S/N: 76J-11041 Rigging/Loading Fee: $800

Quickdraft trim blower with 6x12 venturi and 40 HP AC motor (460/3/60), air intake silencer. Rigging/Loading Fee: $250

Quickdraft trim blower with 6x12 venturi and 40 HP AC motor (230/460v/3/60), air intake silencer. Rigging/Loading Fee: $250

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Industrial Air Products 800 CFM exhaust fan with 3 HP AC motor (230/460v/3/60) Rigging/Loading Fee: $125

Buffalo Forge Company size 890 centrifugal fan with 200 HP AC motor (460/3/60). Type: L-21. S/N: 76J-11040 Rigging/Loading Fee: $900