Utility Cabinet with 5-Drawers and a Storage Box, Caster Mounted, Overall Dimensions 60"L x 36"W x 48"T and weighs Approx. 300Lbs (NOTE: Rigging a...

Equipto 10-Drawer Industrial Storage Modular Cabinet, Overall Dimensions 28" x 30" x 60"T (NOTE: Rigging and Loading Equipment on a Domestic Truck...

Equipto 10-Drawer Industrial Storage Modular Cabinet, Overall Dimensions 28" x 30" x 60"T

Equipto 9-Drawer Industrial Storage Modular Cabinet, Overall Dimensions 28" x 30" x 60"T (NOTE: Rigging and Loading Equipment on a Domestic Truck ...

Equipto 10-Drawer Industrial Storage Modular Cabinet, Overall Dimensions 28" x 30" x 60"T (NOTE: Rigging and Loading Equipment on a Domestic Truck...

Stanley EzTrieve Storage System including (2) Uprights with 3-Adjustable Height Sliding Shelves in each Upright, Each Shelf is 48" x 48" with 4,50...

2013 - Ingersoll Rand Mdl. BW035080 Lifting and Balancing Unit, Capacity 350Lbs at 100 PSI, Travel 80", Pendant Control Handle with Clamping Attac...

2005 - Wesco Mdl. PCBFL-76-25 Counterbalance Lift, Battery Powered, 1000Lb Lifting Capacity, 76" Lift Height, 13" Load Center, 25" Fork Length, Se...

Snorkel Mdl. TV25DC Personnel Lift, 25' Maximum Lift Height, 300Lb Lifting Capacity, 12-Volts, S/N 9422850694, Overall Dimensions 60"L x 28"W x 78...

Sroka Ind. Mdl. HWS-SP Electric Drum Transporter, 900Lb Lifting Capacity, 24-Volt, Type EE, Load Center 13", Battery 25"L x 6"W x 24"T and weighs ...

Clark Mdl. P40E Electric Pallet Jack with 12' Forks, 4000Lb Capacity, Type E, 12 DC Volts, S/N P465-0895-7260FB, Overall Dimensions 173"L x 32"W x...

Daewoo 3550Lb Capacity Fork Lift, LPG, 3-Stage Mast with 188" Reach, 24" Load Center (NOTE: Transmission is Bad)

Hyster Mdl. S60XL Fork Lift, LPG, 6000Lb Capacity, 4-Stage Mast with 266" Reach, 24" Load Center, Solid Tire, S/N B187V04181M (NOTE: Needs Mainte...

Yale 6000Lb Capacity Fork Lift, Mdl. ERC060RAN36SE083, Electric - 36 Volts, 3-Stage Mast with 190" Reach, 24" Load Center, Solid Tire (NOTE: Need...

TCM Mdl. FCG36N5T Fork Lift, LPG, 8,000Lb Capacity, 3-Stage Mast, 189" Reach, 24" Load Center, Solid Tires, Listed Hours 6,503, S/N A58601301 (NOT...

Caterpillar Mdl. M100 Fork Lift, 10000Lb Capacity, Electric - 48 Volt (NO BATTERY INCLUDED), 2-Stage Mast with 156" Reach, 24" Load Center, Solid ...

Hyster Mdl. S-155XL Fork Lift, Diesel, 15,500Lb Capacity, 2-Stage Mast with 134" Reach, 24" Load Center, Mast Height 106", Forks - 5'L x 6"W x 2-1...

RMF Mdl. KSB160 Fork Lift, LPG, 35,000Lb Capacity, 2-Stage Mast with 136" Reach, Forks 8'L x 8"W, Solid Tires, Overall Dimensions 21'L x 68"W x 11...

2004 - Hoist Mdl. F300 Fork Lift, LPG, 30000Lb Capacity, ONLY 1095 Hours, 123" Reach at 24" Load Center, Forks are 60"L x 7"W, Front Tire Size 28x...

1993 - Transcraft Eagle Aluminum Deck Flat Trailer, Mdl. Eagle W2, 45' x 96", 2-Axle (Spread), GVWR - 80,000Lbs, GAWR (All Axles) – 22,700Lbs, Fra...

1988 - Transcraft Trailer, Mdl. DTL 19-45, 45' x 102", 2-Axle (Spread), GVWR - 110,000Lbs, GAWR (All Axles) - 18,160Lbs, Frame Capacity - 50 Tons,...

1983 - Utility Curtainside Trailer, 48' x 102", Door Opening – 101” x 98-1/2”, 2-Axle, GVWR - 65,000Lbs, GAWR (All Axles) – 19,000Lbs, Tire/Pneu S...

1990 - Great Dane Trailers, Inc. 53' Van Trailer, Door Opening 109" x 98-1/2", 2-Axle, GVWR - 55000Lbs, GAWR (All Axles) - 17640Lbs, Tires 10R17.5...

1984 - Kentucky Manufacturing Company 48' Van Trailer, Door Opening 114-1/2" x 98-1/2", 2-Axle, GVWR - 65000Lbs, GAWR (All Axles) - 18160Lbs, Tire...

1984 - Kentucky Manufacturing Company 48' Van Trailer, Door Opening 114-1/2" x 98-1/2", 2-Axle, GVWR - 65000Lbs, GAWR (All Axles) - 18160Lbs, Tire...

Hot Shot Flatbed Trailer, 53’ x 96”W, 2-Axle, Wood Decking, Metal Track 48” (NOTE: This trailer does NOT have a Title)

Oil Storage Tank, 1060 Gallon Capacity, Inlet/Outlet 1-15/16", Overall Tank Dimensions 98-1/2"L x 45"W x 60"T and weighs Approx. 1500Lbs (NOTE: Ri...

Oil Storage Tank, 660 Gallon Capacity, Inlet/Outlet 1-5/8", Overall Tank Dimensions 79"L x 45"W x 52"T and weighs Approx. 1000Lbs (NOTE: Rigging a...

Mikropul Environmental Systems Mdl. CF-4C Mikro Pulsaire Dust Collector, S/N 930434 VI, Overall Dimensions 42"L x 42"W x 144"T and weighs Approx. ...

Mikropul Environmental Systems Mikro Pulsaire Fabric Filter, Overall Size 84"L x 60"W x 144"T and weighs Approx. 1000Lbs (NOTE: Rigging and Loadin...

AER Mist Collector, 1-1/2Hp, 115/230 Volt, 1Ph, Overall Dimensions 27"L x 28"W x 104"T and weighs Approx. 800Lbs (NOTE: Rigging and Loading Equipm...

1999 - Micro Air Mdl. MC810 Air Cleaner, Filter Area has 2-High Efficient Cartridges with 107 sq.ft. Media per Cartridge, Backflush is 2 SCF at 80...

Paco Pump, 900 GPM including a Baldor 40Hp Motor, 1775 RPM, 8" Diameter Intake and Output (NOTE: Rigging and Loading Equipment on a Domestic Truck...

Paco Pump, 900 GPM including a US Electrical 40Hp Motor, 1775 RPM, 8" Diameter Intake and Output (NOTE: Rigging and Loading Equipment on a Domesti...

(2) Paco Pumps, 1350 GPM including US Electrical 25Hp Motors, 1780 RPM (NOTE: Rigging and Loading Equipment on a Domestic Truck will cost $50 and ...

2001 - Swep International Heat Exchanger, Model GX-42P, Hot and Cold Side Max/Min Pressure 10/1, Max/Min Temperature 128/0, Volume 147/63, Stainle...

2001 - Swep International Heat Exchanger, Model GX-26P, Hot and Cold Side Max/Min Pressure 10/1, Max/Min Temperature 128/0, Volume 28/38, Stainles...

Superchanger Heat Exchanger including (84) Plates 16"W x 48"T, Input and Output 4" Diameter (NOTE: Rigging and Loading Equipment on a Domestic Tr...

2015 - Liebert Mdl. MSC028E1ADS340 Condenser, Suitable for Indoor / Outdoor, Vertical Airflow Only, Maximum Working Pressure 600 PSIG, Design Pres...

Kohler Mdl. K-164231-225 Automatic Transfer Switch, 225 Amp, Voltage 240/1/60, Wires 3, Poles 2, S/N K56298, Overall Dimensions 16"L x 26"W x 48"T...

Quincy Mdl. QSVBCNN3A Rotary Screw Vacuum Pump, 10Hp, Magnetic Motor Start, Auto Belt Tensioner, Modulating Inlet Valve, Spin-On Fluid Filter, Tem...

Compair Kellogg Mdl. D8A/R150A Refridgerated Air Dryer, Maximum Working Pressure 200 PSIG, Test Pressure 250 PSIG, Refrig Test Hi 235 PSIG and Low...

Industrial Air Mdl. C580 Vertical Air Compressor, 5Hp, 2-Stage, 200 PSI, Vertical Air Tank 48"T x 24"Diameter, S/N R1515558, Overall Dimensions 32...

Ingersoll Rand Mdl. SSR-EP10 Horizontal Air Compressor, 10Hp, 37 CFM, Maximum Operating Pressure 125 PSIG, Maximum Discharge Pressure 128 PSIG, Vo...

Joy Twistair Mdl. TA-030BA141TH Horizontal Air Compressor, 30Hp, Maximum Pressure 125 PSI, Voltage 460, S/N M41990, Listed Hours 27,627 (NOTE: Rig...

2002 - Kaeser Mdl. 050-200 Rotary Screw Air Compressor, 200Hp, 125 PSI, 877 CFM, Voltage 460/3/60, S/N 1019, Overall Dimensions 88"L x 77"W x 80"T...

2007 - Fadal Mdl. VMC2216HT CNC Verical Machining Center, X-Axis 22", Y-Axis 16", Z-Axis 20", Table Size 39" x 16", Floor to Table Surface 30", Cu...

Amada Pega 304040 Turret Punch Press, 30-Ton Capacity, Sheet Size 40" x 78", Material Thickness 1/4"M.S., Maximum Hole Diameter 4-1/2", Number of ...

LeBlond Sliding Extended Gap Bed Lathe, 20" Swing, 42" Swing over Gap, 15" Swing over Carriage, 192" Between Centers, 276" Between Centers when Ex...

TOS Gap Bed Lathe, 24" Swing, 32" Swing over Gap, 17"L Gap, 14" Swing over Carriage, 168" Between Centers, 192" x 18" Bed, 3" Diameter Hole throug...

American Pacemaker Lathe, 24" Swing, 16" Swing over Carriage, 96" Between Centers, 2-1/4" Diameter Hole through Spindle, Spindle Speeds 12 to 800 ...

Warner & Swasey Mdl. 1A Universal Hollow-Hexagon Turret Lathe, 16" Swing, 40" Between Centers, 3" Diameter Hole through Spindle, 6-Position Turret...

Dashin Prince Mdl. 1240 Lathe, 12" Swing, 7" Swing over Carriage, 40" Between Centers, 1-1/2" Diameter Hole through Spindle, 235 to 1800 RPM, Carr...

Jet Mdl. 1224PS Lathe, 12" Swing, 7-1/2" Swing over Carriage, 24" Between Centers, 1-1/2" Diameter Hole through Spindle, Inch/Metric Threading, 60...

Sunnen Mdl. MBB1600MS Precision Honing Machine, ID Range 0.060" to 6.500", Length Range up to 16" in Length depending on Diameter, Spindle Speeds ...

Orbit Mdl. OR-1458F Pedestal Drill Press, 7" Throat, 12-Speeds, 5/8" Chuck, 10" Diameter T-Slot Table with 1" Drip Lip, Raise and Lowering Crank, ...

Wilton Mdl. 2550 Pedestal Drill Press, 10" Throat, 18-3/4" x 16-3/4" T-Slot Table, Wilton 1-1/2Hp Motor, Voltage 115/230, Raise and Lowering Crank...

Allen 16" Precision Drill Press, Pedestal Mounted, 8" Throat, 14" x 20" Table, 350 to 5200 RPM, Voltage 240/3, Overall Dimensions 27"L x 33"W x 71...

Buffalo Mdl. 2A Pedestal Drill Press, 27-1/2" Rotary Work Table, Voltage 240/400, S/N 64-4196, Overall Dimensions 50"L x 30"W x 96"T and weighs Ap...

Yoshida Mdl. YR5-115 Radial Drill, 12" Diameter Column, 48" Arm, Maximum Distance from Base to Spindle End 50", Drilling Capacity 2", Spindle Spee...