SPI 5C Spin Fixture

(2) Milling Machine Angle Plates

Sine Fixture Plate, T-Slotted

Pair of Adjustable Vise Jaws

5 In. 3 Jaw Buck Chuck, Plain Back

5 In. 3 Jaw Chuck in #5 Morris Taper Back

Dumore Tool Post Grinder w/ Case

Yuasa Super Spacer w/Index Plates, 6 In. 3 Jaw Chuck, Horizontal or Vertical

Vertex Dividing Head, with 5 In. 3 Jaw Chuck

Set of Parallels

R8-SMH, 3/4 In. R8 Insert Cutter

Lot, R8 End Mill Holders & Collets

Obishi Grade 1 Bench Centers, 19 In. X 36 In. Capacity, Adjustable

Clamp Set

Clamp Set

Lot, (11) Bearings: No. 63092, New in Packing

Lot, (45) Bearings, No. 61900-2Z (15), No. 6206Z(4), No. 6203Z(5), No. 6303Z(3), No. 63002Z(15), No. 6091ZZ/2A(3), Most in New Condition ...[more]

Lot, (48) Bearings, No. 6007Z (10), No. 6003 (7), No. 6202ZZ (6), No. 6900ZZ/2A (11), No. 6208 (8), No. 63042 (6), Most in New Condition ...[more]

Lot (36) Bearings: No. 6006-2Z (7), No. 6002 (4), No. 30205 (5), No. 6000ZZ (5), No. 6004/03 (7), No. 6206 (8) ...[more]

Lot, (31)Bearings: No. 6207-22 (5), No. 62042 (20+), No. 6305ZZE(6) ...[more]

Lot, (42) Bearings : No. 6307(6), No. 6205 (6), No. 55KD(10), No. 59ZZ5K(10), No. 62000Z(10) ...[more]

Lot, Misc. Bearings, Bushings, Seals, Etc.

Lot, Horizontal Milling Cutters, Slitting Saws, Misc. Tooling

Lot, 5C Collets

Lot, (3) Live Centers and Jacobs Drill Chuck

Phase II Quick Change Tool Post, Stock #25-300, w/ (5) Holders

Aloris DA1 Tool Post w/ (8) Holders

Huot Drill Index Sets ...[more]

12 In. 4-Jaw Chuck with D1-8 Mount

Kearney & Trecker No. 2 HL Universal, Model H Horizontal Mill, s/n 354998, 35-1400 RPM, 2-Speed, 40 Taper, 9 In. x 40 In. Table, 1/2 In. to 20 In....

Kysor Johnson Model J Horizontal Band Saw , 10 In. X 18 In. Capacity, 3/4 In. Blade, s/n 19715, Coolant, with (1) Extra New Blade ...[more]

Clausing Model 1401 Tool Room Lathe 14 In. x 48 In. Capacity, 6 In. 3-Jaw Chuck, Face Plate, Variable Speed, 45-2000 RPM, s/n 140861, Loading Fee ...

Hardinge Model HSL-59 Speed Lathe, 750-3000 RPM, 5C Collet, 1/2 HP, Compound Slide, s/n HSL-5C-6690-T ...[more]

Millport Model KVH II Vertcal Mill, 10 In. x 50 In. Table, 60-4250 RPM Spindle, R8, Ansong Power Table Feed, Servo Power Cross Feed, Power Draw Ba...

Harig 612 Hand Feed Surface Grinder, Walker Ceremax Magnetic Chuck, s/n 15293 ...[more]

Scotchman Bewo Model CPO350 LT Cold Saw, 14 In. Capacity, 3 HP, Coolant Tank, Miter Cut, 45 Degree Left and Right, Misc. Extra Blades, Roller Conv...

Cress Heat Treat Oven, Model C601/PM3E, 8.5 In. Wide x 6.5 In. Height Chamber, 110/1/60 Electrics, s/n 1104

Powermatic Model 87 Vertical Bandsaw, 20 In. Capacity, 1/2 In. Blade, Blade Welder, Misc. Extra Blades, s/n 2-3480 ...[more]

Jet Model 09526823 Notcher, 6 In. x 16 Gage Capacity, s/n 931002

Jet Manaul Slitting Shear, Model SS-8N, Capacity 1/2 In. Round, 3/16 In. Flat ...[more]

Ingersol Rand Model 2340L5X1 Air Compressor, 5 HP, 60 Gallon, 2-Stage Cast Iron Compressor, 220 Single Phase Electrics

Black Diamond Model 2B Drill Grinder, 1/3 HP, Large Quantity Collets

Lodge & Shipley Powerturn Engine Lathe , Swing over Carriage 24 5/8 In., Swing over compound rest 17 3/4 In, Maximum Center Distance 78 In., Taper...

ALC Sandy Jet Sand Blast Cabinet, Model 3020B, 20 In. X 30 In.

Haas VF-3B CNC Vertical Machining Center, s/n 1074625, New 2009, Haas CNC Control, Cat 40 Taper, 20 ATC, 7,500 RPM, 2-Speed, 20 HP, Ridgid Tapping...

Haas Model HRT-210 CNC 4th Axis Indexer, s/n 2225299, New 2009, New Condition, Original Cosmoline Still on Surface, Never Installed, 8.3 In. Facep...

Lot, (2) Cat 40 ER 32 Extension Collet Holders

Lot, (3) Cat 40 ER 32 Collet Holders

Lot, (3) Cat 40 ER 32 Collet Holders

Lot, (3) Cat 40 ER 32 Collet Holders

Lot, (2) Cat 40 ER 32 Collet Holders and (1) .75 In. Cat 40 End Mill Holder

Lot, (3) Cat 40 End Mill Holders

Lot, (3) Cat 40 Collet Holders

Lot, (2) Cat 40 ER Collet Holders and (1) Cat 40 ER 16 Collet Holder

Lot, (2) Cat 40 ER Collet Holders and (1) Cat 40 ER 16 Collet Holder

Lot, (2) Cat 40 ER Collet Holders and (1) Cat 40 ER 16 Collet Holder

(2) Cat 40 End Mill Holders and (1) Cat 40 ER 32 Collet Holder

Cat 40 Albrecht Keyless Chuck

Cat 40, 3 In. Face Mill Cutter

Cat 40, 1 In. End Mill Holder w/ Cutter