Lot

168

Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown

In Centerline Tank & Trailer Surplus Machinery to...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 763-478-0306 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 1 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 2 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 3 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 4 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 1 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 2 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 3 of 4
Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown - Image 4 of 4
575 USD
Alexandria, Minnesota
7.375%
0%

Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown

Fastenal Portable Rolling Bin with Split Washers, Flat Washers, Nuts and Bolts as Shown

Centerline Tank & Trailer Surplus Machinery to the Continuing Operation of

Ends from
Venue Address
418 Geneva Road NE
Alexandria
Minnesota
56308
United States

For Strand Industrial Auctions delivery information please telephone 763-478-0306.

Important Information

IMPORTANT INFORMATION:

 

 

ONLINE TIMED AUCTION- Centerline Tank & Trailer Surplus Machinery to the Continuing operation of.

 

Lots begin closing at 11:00 AM. Central Time Thursday, January 14, 2016.

NOTE: *ALL LOTS MUST BE REMOVED FROM THE PROPERTIES NO LATER THAN 4:00 PM CST ON FRIDAY JANUARY 22, 2016. THERE WILL BE NO ONE PRESENT AFTER THIS DATE. IF YOU NEED ASSITANCE CONTACT THE ON-SITE RIGGER OR MAKE ARRANGEMENTS.*  

 

All lots located at: 418 Geneva Rd. NE. Alexandria, MN. 56308.

EXCEPT: LOTS 150, 225, 456, 458.  Are located at the main plant in Long Praire, MN. Note: Lot 100 - The Panjaris Seam Welder is located in Long Prairie, MN and the The Panjaris Seam Sander and Roller Ball Tables are located in Alexandria, MN.

Long Prairie address:  25 4th Street S., Long Prairie MN 56347


INSPECTION OF ALL ITEMS: Tuesday January 12, 2016 9:00AM to 3:00PM
REMOVAL DATES: 9:00 AM to 4:00 PM January 21st & 22nd

ON SITE RIGGER: Cullinan Rigging & Erecting, PH: 763-422-9141


ACCEPTABLE FORMS OF PAYMENT:

WIRE TRANSFER, COMPANY CHECK if accompanied with a letter of guarantee from your bank or certified check. Personal checks up to $250.00 will be accepted. Cash also accepted. Checks from $250.00 to $1,000.00 must be pre-approved by Strand Industrial Auctions before auction starts to close. PayPal plus a 3% convience fee. Credit Cards will NOT be accepted. ALL INVOICES MUST BE PAID IN FULL WITHIN 48 HOURS OF CLOSE OF SALE. SALES TAX APPLIED AS APPLICABLE PER LOCATION. IF YOU ARE TAXED EXCEMPT PLEASE SEND A ST-3 WITH YOUR PAYMENT. ****WIRE INFORMATION IS LISTED ON THE TERMS AND CONDITIONS PAGE**** IF YOU WILL REQUIRE A W-9, PLEASE CONTACT US.  

Strand Industrial Auctions Inc. will not and is not responsible for loading, rigging, packaging or prepping any items for shipment. We can help make those arrangements if needed. 

FEATURED MACHINES:

2013 ROCCIA Model HR4W 4 Roll Programmable Plate Bending Roll, 10' X 1/2" Bending Capacity.

1996 Roundo R-4 Angle Bending Roll

1983 Roundo PS 205 14’ X 3/16” Plate Roll

2013 Miller Invision 352 Mpa Welders (several)

Panjaris 14’ Seam Welder with Panjaris 14’ Sander

C&G Systems Plasma with Burny Control

Chicago/ D&K 60/90 Ton X 12’ Press Brake

Cincinnati 2512 3/8” X 12’ Power Squaring Shear

Hyd-Mech S-23P Horizontal Bandsaw

Mubea KBL ½ Ironworker

Semi Truck & Trailers

Stake Truck, Etc.

 

BidSpotter Customer Service Support Department

To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.

Terms and Conditions

ONLINE TIMED AUCTION-  Centerline Tank & Trailer Manufacturing – Surplus Equipment From the Ongoing Operations – Online Only  Lots begin closing at 11:00 AM Central Time, January 14, 2016. Lots located at 418 Geneva Rd. NE., Alexandria, MN. 56308 

Terms & Conditions for: Strand Industrial Auctions, Inc. 

NOTE: *ALL LOTS MUST BE REMOVED FROM THE PROPERTIES BY 4:00 PM CST NO LATER THAN FRIDAY JANUARY 22, 2016. THERE WILL BE NO ONE PRESENT AFTER THIS DATE. IF YOU NEED ASSITANCE CONTACT THE ON-SITE RIGGER OR MAKE ARRANGEMENTS.*  

-There is a 16% Buyer’s Premium applied to on-line bidders who purchase at this sale. 

-Sales Tax applied as applicable on all purchases. 

-SORRY, NO CREDIT CARDS WILL BE ACCEPTED FOR THIS SALE. 

-NOTICE: ALL BIDDERS AND OTHER PERSONS BIDDING AT THIS SALE AGREE THAT THEY HAVE READ AND HAVE FULL KNOWLEDGE OF THESE TERMS & CONDITIONS AND AGREE TO BE BOUND THEREOF! 

-IDENTIFICATION - All purchasers are required to give their full name, company name, permanent address (NO PO BOXES WILL BE APPROVED), phone number and signature. 

-TERMS: The buyer does hereby assume and does agree to indemnify and hold the auctioneer and sellers harmless from any future claim which shall pertain to the fitness or use of the asset as being purchased. 

REMOVAL - No lot can, on any account, be removed during the auction sale. Removal is at the expense, risk and liability of the purchaser. Purchaser is liable for any damages caused by removal including any environmental damage. Lots that can be reasonably hand carried and does not put the successful bidder or any other individuals in harm’s way may be removed by the successful bidder unless otherwise stated. Any lots or items that require the assistance of a rigger is at the expense, risk and liability of the purchaser. Should assistance from a rigger be needed to remove a lot(s), only licensed, bonded and insured riggers will be allowed to remove lots and or any items from the auction site. Purchaser will abide by all written and verbal rules, regulations and requirements by Strand Industrial Auctions and its representatives. All successful bidders must pay in full for all goods and funds must clear prior to removal, Purchases will be released only upon presentation of a paid invoice. The auctioneer will not be responsible for items / lots not removed within the time allowed, but does have the option to remove and store, at the risk and expense of the purchaser or resell the lots at public or private sale without giving further notice, and any deficiency will be charged to the purchaser. It is the responsibility of the buyer to completely remove any article purchased by him and should any part of any such article be abandoned, the buyer will be liable for any expense involved in its removal.

 

 MANNER OF PAYMENT – ALL INVOICES MUST BE PAID IN FULL WITHIN 48 HOURS OF THE CLOSE OF SALE. (Receiving your winning notice/invoice from Bidspotter). All forms of payments due are to be made payable to the order of: Strand Industrial Auctions Inc. Strand Industrial Auctions Inc. will accept the following forms of payment: Cash, Your Company check if accompanied with a letter of guarantee from your bank (see sample below), wire transfer (information below) , certified check. PayPal, *if paying via PayPal please contact us for a revised invoice and the additional 3% convenience fee that will be added to the total invoice.* Personal checks less than $250.00 will be accepted, Personal checks over $250.00 must be pre-approved by Strand Industrial Auctions Inc. before auction starts to close.  All invoices must be paid in full within 48 hours of the close of sale. All lots must be paid in full prior to removal.

WIRE INFORMATION:

ANCHOR BANK NA

1570 CONCORDIA AVE.

ST. PAUL MN 55104

FBO STRAND INDUSTRIAL AUCTIONS, INC.

1055 WAYZATA BLVD

WAYZATA MN 55391

ACCOUNT NUMBER: 100025539

ROUTING NUMBER: 096015232

SWIFT CODE FOR INTERNATIONAL WIRES IN US FUNDS: ANCRUS44

 

-EXAMPLE

Please show this letter to your bank.

To: Strand Industrial Auctions, Inc. Hamel, MN.

Mr. (Customer Name) of (Company Name) is a customer at this bank. This bank will guarantee irrevocable, unqualified payment for full face value stated on this letter to Strand Industrial Auction, Inc. for checks drawn on (account number) for an amount up to $_____.00. This letter is Valid for seven (7) days and for the (Name of Auction) ONLY.

 

CONDITION OF ARTICLES SOLD - The auctioneer shall not be held responsible for the correct description, genuineness, authenticity of or defect in any lot, and makes no warranty in connection therewith. No sale will be set aside or allowance made for any incorrectness, error in cataloging or any imperfection not noted. No allowances or deduction will be made on damaged articles. All goods are exposed for public exhibition and sold "AS-IS" "WHERE-IS" and without recourse. Purchaser acknowledge that the goods described herein are preowned used goods which were neither designed nor manufactured by the seller, nor has the Seller knowledge of, or control the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Purchaser. Purchaser in purchasing equipment agrees upon receipt of machinery subject to this agreement it will be buyers duty to inspect all machinery on a continuing basis; provide proper safety devices and equipment or means necessary to safeguard the operator from any harm for any particular use, Operation or set-up machines; to adequately safeguard each; machine or equipment to meet all federal, state, and local government safety standards which may be imposed from time to time, including, but not limited to: 1970 Occupational Safety and Health Act. 

RESERVE: The auctioneer reserves the right to reject any and all bids. The auctioneer shall have the right to bid on the behalf of the seller on lots where there is a reserve.

 

Inspection of all items is 9:00AM to 3:00PM Tuesday January 12, 2016

All invoices must be paid within 48 hours of the end of the sale (Receiving your winning notice/invoice from Strand Industrial Auctions or Bidspotter) 

REMOVAL DATES: January 21st & 22nd 2016 – 9:00 AM to 4:00 PM

Contact our office: 763-478-0306

 

 

 

See Full Terms And Conditions