Used SCM (SCMI) Olimpic S 1000 Edgebander (2011) machine is located in Dallas TX packed for shippment a fixed $200 loading fee will be added to th...

Used POLYMAC Akron 430 Edgebander (2007) machine is located in Dallas TX packed for shippment a fixed $200 loading fee will be added to the winnin...

Used SCM Stefani One Activa / 1-58 Edgebander (2004) 2004 Stefani One single side edgebander for coils or strips up to 3 mm - Pre-milling statio...

Used CEHISA Model 305 Edgebander (Year: 2003 as per prev. owner) Machine was taken from service in running condition. - End-trim - Top and botto...

Used BRANDT KD 66 (2002) End trim, Fine trim, PVC Scrape, Buffing Machine is located in Dallas TX packed for shippment a fixed $100 loading fee ...

Used HOMAG KAL 310/4/A3 Edgebander (2003) SINGLE-SIDED EDGEBANDING MACHINE - Capable of coiled material up to 3 mm, and simple strips - Two coil...

Used SCM (SCMI) Olimpic K 208 Edgebander (2002) - Needs a lot of work, sold 'as is' only - Machine is located in Dallas TX packed for shippment ...

Used SCM K208E Edgebander (2000) Not tested. Was not in service immediately prior to arrival at our warehouse Machine is located in Dallas TX pac...

Used IMA Edgebander (2000) - MADE IN GERMANY - Machine is located in Dallas TX packed for shippment a fixed $200 loading fee will be added tothe ...

Used BRANDT KD-99 Edgebander (1997) Machine is located in Dallas TX packed for shippment a fixed $200 loading fee will be added tothe winning bid....

Gannomat Format 42 (2) Upstroke boring heads, each with (21) spindles on 32 mm centers (3,400 RPM spindle speed), drills from the bottom-up; (2) 2...

Used HOLZ-HER Accord 1442 Edgebander (1988) ...[more]

Description: Ima Novimat Concept Edgebander year 2002. ****Machine is located in East Tx, packing and loading must be cordinated with seller.**** ...

Holzher ? Model # 1435SE PLC YR. 1999 **** Machine is located in San Antonio Tx packing and loading will need to be arranged with seller.****

COUNTER EDGEBANDER Fravol F40 Yr. 2005 ? Model # A16/S **Machine is located in San Antonio Tx packing and loading will need to be arranged with se...

COUNTER TRIMMER Fravol F40 Yr. 2005 ? Model # VSR Machine is located in San Antonio Tx packing and loading will need to be arranged with seller.

Brandt Optimat KDN 330 Edgebander 2004 0.4 - 3 mm (1/8") Edge thickness cap., 8 - 45 mm panel thickness, 60 mm min. panel width and 140 mm min. le...

Used HOMAG FL 20/07/25 (Torwegge Model H634) Double End Tenoner (2006) for Sizing and Contour Shaping of Solid Wood Doors ! In our warehouse /...

Homag BAZ (1999) Machining Center and Contour Edgebander This machine has been de-installed and is ready to ship. It was packed profes ...[mor...

Used UNIQUE 319 SS Shaper (2007) Note: Machine does not come with tooling ...[more]

Used BUTFERING STO 213 ML Wide Belt Sander (2002) This machine needs work: tooling, knives on cutter-heads and could use a feed belt !! located...

Grizzley GO539 single head drum sander 2005 This is a running sander but has a groove in the roller. I have new rollers and belt t...

Heesemann sander (2002) specs in pictures ***Machine in in Dallas there will be a fixed $400 loading fee**** ...[more]

Description: Used 2007 KOCH Sprint PTP 3/1300 (2007)****Machine is located in East Tx, packing and loading must be cordinated with seller.**** - 1...

Weeke BP 100 CNC Router (2001) ser # 0-250-13-0767 Machining Center ...[more]

Lot 22 Used WEEKE BHC-350 S/2 CNC Machining Center (2004) This Machine is located in Dallas TX and has a fixed loading cost of $400 that will ...

Used BIESSE Rover 22 CNC Router (2002) Used in a small shop. X Axis 120 inches Y Axis 42.5 inches Z azis 6.1 inches Vertical Drilling: 14 dril...

Lot 24 Used WEEKE Model BP-100 CNC Router / CNC Machining Center (1999) Machine is packed and ready to load in Dallas TX there is a fixed $3...

Used BUSELLATO Optima CNC Machining Center (1999) located in Dallas TX packed and ready to load fixed $300 loading fee will be added to winning b...

Used WEEKE BP-100 CNC Router / CNC Machining Center (1997) Need of repair was running but may have missing parts. located in dallas tx ready t...

CMS flat table router (2001) **** Located in Austin Tx packing and loading must be coordinated with seller****

Description: KOMO VR 512 ( 5 x 12 bed) with vacuum pump, drill block, automatic tool changer. (1998) ***Machine is located in East Tx, packing and...

Used Biesse Rover Pod and Rail - Point to Point (2000) ****Machine is located in East Tx, packing and loading must be cordinated with seller.****...

Shop Sabre ? Model # 4896 YR. 1997 ****Machine is located in San Antonio Tx packing and loading will need to be arranged with seller.****

Comil Star shrink wrap machine: 1995. Ser # 950105 480volts, runs about 90 amps and requires 200 amp service. Comil Star complete shrink wrap li...

Onsrud 750SS Inverted Pin router with Vacuum Template system. 2004 Throat depth: 30'' Table size: 36'' x 24'' Maximum workpiece / template heigh...

Used SELCO EB 120-L front load panel saw with 126 inch L x W cutting area and pull back (2002) - 122 mm (4.8 inch) Main saw blade projection - 18...

Used GABBIANI Galaxi 115b / BT Beam Saw (2001) ...[more]

Used HOLZ-HER 1243 Sliding Table Saw ( ) Machine is in L...

Used ALTENDORF F-45 Sliding Table Saw (1998) Machine is located in Dallas TX a fixed $100 loading fee will be added to the winning bid. - 5 foot s...

SCMI sliding Table saw (1997) *** Located in Austin Tx packing and loading must be coordinated with seller****

Biesse Selco Panel saw EB120 (2000) ****Machine is located in East Tx, packing and loading must be cordinated with seller.**** 12? machine will h...

Used SAW STOP #1, Model ICS 31230 Table Saw - 10" Industrial Cabinet Saw ...[more]

Used SAW STOP #2, Model ICS 31230 Table Saw - 10" Industrial Cabinet Saw ...[more]

Used DIEHL Rip Saw (2001) Machine is in Dallas Tx and a fixed $200 loading fee will be added to the winning bid. 480 Volt / 3 phase

Holzher ? Model # 1242 (2001)**** Located in San Antonio packing and loading must be coordinated with seller****

Used MIDWEST Automation Model 5033 Counter Top Saw Machine is in Dallas...

Used POWERMATIC Planer Model 201 Machine is in Dallas Tx and a fixed $50 loading fee will be added to the winning bid. Electrical: 230 / 1 Phase...

Used DELTA DC-580 Planer Model 22-450 Machine is in Dall...

Used SORBINI VS32-1 Panel Cleaner (2006) Machine is in Dallas Tx and a fixed $50 loading fee will be added to the winning bid. Maximumg board widt...

Used INGERSOL Air Compressor SS5 Machine is in Dallas Tx ...

JTL Clamps ? Model # 78G-5-8 No Year Giving**** Located in San Antonio Tx packing and loading must be coordinated with seller****

Used INGERSOL Air Compressor 2475 Machine is in Dallas Tx and a fixed $50 loading fee will be added to the winning bid. - in very good condition -

5000# Mitsubishi fork lift. Runs and drives great everything works, no key pus...

Used YALE 6,000 lbs Forklift Machine is in Dallas Tx and a fixed $50 loading fee will be added to the winning bid. 4' forks

12,000# Clark forklift, 8ft forks Two stage mast, side shift, LP cusion t...

Maggi Junior 640 radial arm saw. Good running shape has a crack in the casting on the hight ad...

Two bag Power matic portable dust collector tested ok Machine is in...

230/460 3 phase step up/down transformer Machine is in Dallas Tx ...

Single bag Jet portable dust collector Machine is in Dallas Tx and...