[Lot] Cross Over Stair, carbon steel, 3 & 4 steps, 24" wide ...[more]

Compacker case packer, model EP 11-3, s/n EPII95137, horizontal twin infeed / side discharge, hand crank adjust, with Nordson series 3400 hot melt...

CHSC spiral conveyor ...[more]

Salwasser robotic case packer, model OBC-2 /Sureway PAKGD4-8, s/n 9901564, continuous motion, 6 lanes, with stainless feed conveyors ,3"W x 9' & 1...

Markem case coder, model 5400, s/n 042311, touch dry ink jet printer, with (2) printhead ...[more]

Currie case elevator, s/n CE3768, 9'H, with 3"w x 36"L table top steel belt feed conveyor, indexing switch /sensors, aluminum elevator flights @ 3...

Jib Cranes, (1) 1/4 ton electric chain hoist, 1/2 ton trolley, 5', 6', 8'L x 3"x6"I beam ...[more]

Jib Cranes, (1) 1/4 ton electric chain hoist, 1/2 ton trolley, 5', 6', 8'L x 3"x6"I beam ...[more]

Jib Cranes, (1) 1/4 ton electric chain hoist, 1/2 ton trolley, 5', 6', 8'L x 3"x6"I beam ...[more]

Important information: This is a multi-Storied facility. It is highly encouraged that bidders either schedule an inspection time or contact an app...

SIG Swiss Industrial brick pack packager, model RSBSV, s/n 517243110, 120 ppm, continuous motion horizontal form fill seal brick pack machine with...

(2) Tap Tone bag checkers, model TT2000, s/n 640, with HMI & remote transducer /sensor /reject station 115V ...[more]

SECO Engineering alpine conveyor, with 2hp gear drive, 50:1 ration, 1750/1730rpm, aluminum aluminum extrusion frame, extend from SIG-1 take off to...

Tap Tone bag checkers, model TT2000, with HMI & remote transducer /sensor /reject station 115V, ...[more]

Flex-Link lowerator, with 3" gripper belt, aluminum extrusion frame assembly, 1hp gear drive, 6'H x 3'L discharge x 3'L infeed sections

Douglas Machine tray packer 1, with bottom & top magazine hopper, 64"L x 14"W, operator's infeed, crossover, discharge conveyor, starwheel dischar...

[Lot] Conveyor, approx 30' total linear feet length x 7-1/2"W with roller top low friction plastic chain conveyor, gear drives, carbon steel frame

Weldotron tray wrapper, model 1208C, s/n IV75912, 460v,1ph/60hz,

Conveyor, (2) feed conveyors to case elevators, 8'L x 18"total frame width with 2- 7-1/2" plastic chain belts, gear drives

Currie elevator, s/n CE-3 559, with aluminum flights, infeed conveyor with sensor, gear drive approx 8'H, 480V, 3ph/60hz

SIG Swiss Industrial brick pack packager, model RSBSV, s/n 516243097, 120 ppm, continuous motion horizontal form fill seal brick pack machine with...

Tap Tone bag checker, model TT-2000, s/n 641, with HMI & remote transducer /sensor /reject station 115V, ...[more]

Alpine Conveyor, with 2hp gear drive, 50:1 ration, 1750/1730rpm, aluminum aluminum extrusion frame, extend from SIG-2 take off to lowerator -2, ap...

Important information: This is a multi-Storied facility. It is highly encouraged that bidders either schedule an inspection time or contact an app...

Tap Tone bag checkers, model TT-2000, with HMI & remote transducer /sensor /reject station 115V, ...[more]

Flex-Link lowerator, with 3" gripper belt, aluminum extrusion frame assembly, 1hp gear drive, 6'H x 3'L discharge x 3'L infeed sections

Douglas Machine tray packer 2, with bottom & top magazine hopper, 64"L x 14"W, operator's infeed, crossover, discharge conveyor, starwheel dischar...

Marsh case coder, model Patrion Plus, with print head

Weldotron tray wrapper, model 12080, with roller infeed table, sealing jaws, film rollers, case pusher to shrink tunnel,

Currie case elevator 1, s/n CE-3-482, with aluminum flights, infeed conveyor with sensor, gear drive approx 8'H, 480V, 3ph/60hz

Stainless Furnishings, (1) 6'L x 2'W x 38"H, with drawers and canopy, (2) HMI station cabinets

Lyons parts cabinet, 9 drawers with partitions, parts included, bearings, air cylinders, fittings, on wheel casters (gray)

Cross Over Stair, 6 steps aluminum x 24"W with safety railing, checkered plate flooring

[Lot] of 2  Bucket Elevators from Main floor to floor above. Aprox 8" buckets ...[more]

[Lot] Spare Parts, for SIG brick pack lines with (3) 2 door storage cabinets

Important information: This is a multi-Storied facility. It is highly encouraged that bidders either schedule an inspection time or contact an app...

Bosch zip top bag filler Model: CBS-D, S/N: 10-29366, Volt: 230, Hz: 60, Phase: 1, Largest Motor Amp: 4.9, with AS&E model 50 double auger head /s...

Bosch bag sealer, model CBS-D, s/n 1029366, continous motion with 15" sealing bar, doboy 10"W x 10' conveyor,350' - 1200'/min heat sealing capacit...

Ishida checkweigher, model DACS-W-050-SB/PB-I, s/n 52711, 120V, 4.5a, 60hz, with 12"W conveyor belt, 11lbs capacity, mfg 2002

Slat Belt Case Conv, 12"W x 44"L, 12"W x 4'L, with reject pusher, geardrives, register

[Lot] Conveyors, 7-1/2"W x 55'L total 90 & 180deg with plastic slat belt, (2) gear drives ...[more] ...[more]

Elliot case erector, with 9-1/2"W x 7'L feed 460V, 3ph/60hz,

3M-Matic case sealer, model 12AF - 48800, s/n 5649, top seal, adjustable case seal,

ID Technology labeler, model 250, corner wrap, swing arm applicator on mobile base.

Currie case elevator, s/n CE-3539, 9'H, with 3"w x 36"L table top steel belt feed conveyor, indexing switch /sensors, aluminum elevator flights @ ...

[Lot] Full Case Conveyors, 8"W x 125' total length slat belt conveyors, (1) rollers, 24"W x 20'L, (2) roller accumulation and diverter tables, 3'W...

[Lot] DSL filler parts, (8) stainless filler augers with 2-1/2" & 3-1/2"dia column, type 70943DSL, 73904DSL, 73402DSL, tube formers, size 6.00" (o...

Stainless Cabinet, 2 door, 21"W x 45"L x 74"H

[Lot] Cabinet with Parts, 2 door aluminum cabinet with assorted parts for zip top line

Important information: This is a multi-Storied facility. It is highly encouraged that bidders either schedule an inspection time or contact an app...

[Lot] Vidmar parts cabinet, 6 drawers with partitions and parts included, mobile base

[Lot] Lyon parts cabinet, 9 drawers with partitions and parts included, mobile base

General Processing System product reclaim machine, model 40, s/n 2027, with model 224, s/n 2027 bag chopper, 16" rotary drum screen, with 4" disch...

Flexicon stainless hopper, 36"W x 36"L x36"deep, 4-1/2" discharge, 10" feed inlet, with 3" dia stainless X 17'L flex auger on mobile base

Stainless Hopper, 18"L x 18"W x 28"deep with hinged top lid cover, wire weld safety screen, 2"dia x 24" bottom discharge, on mobile base

Stainless Hopper, 18"L x 18"W x 28"deep with hinged top lid cover, wire weld safety screen, 2"dia x 24" bottom discharge, on mobile base

Stainless Hopper, 18"L x 18"W x 28"deep with hinged top lid cover, wire weld safety screen, 2"dia x 24" bottom discharge, on mobile base

Stainless Hopper, 18"L x 18"W x 28"deep with hinged top lid cover, wire weld safety screen, 2"dia x 24" bottom discharge, on mobile base

[Lot] Film Roll Rack, stainless, 2 high, 12"W rack, on mobile base

BestFlex flexible conveyor, 19"W x 74"L collapsed dim X 20"H with wheel casters