Dallas TX: 2017 Wood Pellet Line BULK ,  Available Prior to Auction as complete Call Schneider Ind -- Bidders are strongly encourage to contact jo...

Dallas, TX Bulktech Raw material bulk bin, new approx 2017 (lot does not include vibratory feeder): Dallas,Tx ***Loading Fee of: $500 to be added ...

Dallas, TX Precision vibratory conveyor used to unload bulk bin (lot does not include bin above unit: Dallas,Tx ***Loading Fee of: $1500 to be add...

Dallas, TX Incline belt conveyor approx 18" x approx 20' with magnet stations: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's ...

Dallas, TX West Salem 250hp 4032B wood hog approx 46lbs swinging hammers mounted on a stand: Dallas,Tx ***Loading Fee of: $1500 to be added to win...

Dallas, TX Large pulsjet type dustcollector baghouse: Dallas,Tx ***Loading Fee of: $2500 to be added to winning bidder's invoice. Loading fee is c...

Dallas, TX Blower for dust collector: Dallas,Tx ***Loading Fee of: $500 to be added to winning bidder's invoice. Loading fee is collected by Schn...

Dallas, TX Rad U-trough auger, built in 2017: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee is collected...

Dallas, TX Rad bucket elevator, built in 2017, approx 16': Dallas,Tx ***Loading Fee of: $2500 to be added to winning bidder's invoice. Loading fee...

Dallas, TX Rad Short U-trough auger, built in 2017: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee is col...

Dallas, TX Bulktech Bulk chip bin with auger with stand: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee i...

Dallas, TX Sprout 2212 50hp tear dromp hammermill with stand: Dallas,Tx ***Loading Fee of: $500 to be added to winning bidder's invoice. Loading f...

Dallas, TX Hammermill blower: Dallas,Tx ***Loading Fee of: $500 to be added to winning bidder's invoice. Loading fee is collected by Schneider on ...

Dallas, TX Torit Dust collector above sawdust bin (sawdust bin not included): Dallas,Tx ***Loading Fee of: $2500 to be added to winning bidder's i...

Dallas, TX Large Bulktech sawdust bin with Rad auger and stand, new approx 2017 (torit collector and pellet mill not included): Dallas,Tx ***Loadi...

Dallas, TX Colorado Mill Equipment R150 Pellet Mill with feeder, conditioner, force feeder, die, and rolls, new in 2017...set up for grilling pell...

Dallas, TX Incline belt conveyor for picking up pellets: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee i...

Dallas, TX Rad bucket elevator with transition conveyor to cooler built 2017, approx 14' : Dallas,Tx ***Loading Fee of: $2500 to be added to winni...

Dallas, TX Colorado Mill Equipment C3 Counter flow pellet cooler with built in air system and airlock: Dallas,Tx ***Loading Fee of: $2500 to be ad...

Dallas, TX Fines return auger from airlock to pellet mill: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee...

Dallas, TX Rad U-trough conveyor from cooler to bucket elevator, built-in 2017: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's...

Dallas, TX Rad bucket elevator for loading bagging bin, built-in 2017: Dallas,Tx ***Loading Fee of: $2500 to be added to winning bidder's invoice....

Dallas, TX Bulktech bagging station on legs with Colorado Mill Equipment BSM bagger: Dallas,Tx ***Loading Fee of: $2500 to be added to winning bid...

Dallas, TX Colorado Mill Equipment Bag Sealer Model SLR continuous hot air sealer with bag stand and 6' belt conveyor, mounted on adjustable heigh...

Dallas, TX Schenck Process Dust colletctor: Dallas,Tx ***Loading Fee of: $1500 to be added to winning bidder's invoice. Loading fee is collected b...

2019 CME Hammer-Mill, Model: HMA50, w/ 50HP motor, with built in blower, new cost $24,500. NOTE FROM SELLER: Approx 100hrs of use, in excellent co...

Lot of (2) auger conveyors Size: 15 ft 6 in. -- NOTE FROM SELLER: One still in the crate, never been used. The other used for maybe 10 hours befor...

Lot of (2) auger conveyors, Size:22 ft -- NOTE FROM SELLER: Same type as lot 202 -- just bidder. Work great.. The motor is 3 hp- and is the same s...

Located in: Grand Saile, Texas:  NEW: CME Galvinized Bucket Elevator, Model: BE16G, Orig Cost $8300: ***Loading Fee of: $200 to be added to winnin...

CME Hammer-Mill, model HNS-VB-HT-10, 10hp, grinds up to 7 tons of corn per hour with 3/16" screen:  NOTE FROM SELLER:Rated to process about 300# p...

CME Hammer-Mill, model: ECO HMS-VB-10, S/N 1706107, Lot is inclusive of all shown in photos.: Located Greenley, CO ***Loading Fee of: $200 to be a...

Located in Wisconsin: Colorado Mill Equipment R150 2019 Pellet mill with 200hp main motor, made in USA, never installed, 1/4" die, feeder, conditi...

Located in Wisconsin: Colorado Mill Equipment R150 control panel for R150 200hp pellet mill with feeder, conditioner, and force feeder. replacemen...

Located in Wisconsin: Colorado Mill Equipment C3 pellet cooler, made in USA, capable of cooling up to 3-4 tons per hour depending on product, with...

Located in Wisconsin: Colorado Mill Equipment C3 control panel replacment cost approx $6900, loading fee $100 to be added to winning bidder's in...

Located in NC: HMX400 Hammermill with a 460V 200 HP motor. This was rated to mill approximately 4000 lbs of hemp per hour. This unit has never bee...

Located in Waterloo, IA: Pellet Mill, Model: R-30 by Colorado Mill Equipment, 30 hp Motor, three phase nine inch in diameter by four inch wide die...

Located in Cannon City, CO: NEW/Unused Colorado Hammermill Equipment HMA100 with 100hp motor , 10" x 20"inlet, blower discharge, with magnet, Made...

Located in Canon City, CO:  NEW/Uused Colorado Mill Equipment BSM Bag Scale, rated at up to 12 bags per minute, 15-125lbs, easy slide wt adjustmen...

Located in Hazelhurst, GA -- Bliss 200B - 120 Bliss Pioneer Pellet Mill Year: 2014 Two stage belt drive transmission with HTD belt drive from two ...

Located in Northampton, MA: CME Hammermill, Model: 10HP ECO-HMS, Unit is fully stainless steel 10HP ECO-HMS with 1", 3/4", 1/2", and 3/8" screens ...

Located in La Vista, NE: Millennium C3 Counterflow Cooler with the Air System Cyclone and Blower.  Loading fee of: $300 to be added to winning bid...

IEC Dryer -- BIDDERS MUST CALL TO BID -- THIS ITEM HAS A MINIMUM RESERVE OF $150,000 -- NOTE FROM SCHNEIDER INDUSTRIES ABOUT SALE -- Seller just b...

Amano dust collector, model # WRT-5096; rated 10,000 cfm; pulse jet cleaning system; 30Hp premium efficiency severe duty motor; 230/460volt; 108 n...

Dustex dust collector; rated 10,000 cfm; pulse jet cleaning system; 40Hp premium efficiency hostile duty motor; 230/460volt; 72 nomex filter bags ...

Hyster S40 LNG forklift; soft-cushion tires, 4 function controls (lift/lower, tilt, load shift, fork width); Duramatch transmission; ROPS cage; 31...

Florence, CO Clark 15E LNG forklift; pneumatic tires, 3 function controls (lift/lower, tilt, load shift); ROPS cage; 2450 pound capacity; 7549 hou...

Florence, CO ARPAC Pro-Series High Profile Semi-Automatic Stretch wrapper; rotary base; includes 16 rolls of stretch wrap; fully functional, in se...

Florence, CO SWECO 60" vibratory screener; 2 screen decks, 3 outlet chutes; includes new spare motor; equipped with TechLube automatic greaser sys...

Florence, CO SWECO 48" vibratory screener; 3 screen decks, 4 outlet chutes; fully functional, in service and last running at our location June 202...

Florence, CO SWECO 48" vibratory screener; single screen deck, 2 outlet chutes; fully functional, in service and last running at our location June...

Florence, CO Lot of (3) Union Special bag closing machine/sewing machine heads; belt-driven, designed to close paper or poly bags; 2 gray/brown un...

Florence, CO Various new and slightly used/near new Midwestern Industries market grade screens for use on vibratory screening units; (5) screens t...

Tulsa, OK: Extruder, Technell, 8”, Similar to Anderson 8”, 100 HP, Rebuilt, Less than 10-Tons Soybeans Processed Through Machine: Tulsa, OK ***Loa...

Tulsa, OK: Feed Bin, Southwest Fabricators, 30 Tons with 8’ overhead clearance & 45 Degree Cone. Never Used, Internal coating. Needs Touch up Pain...

Tulsa, OK: Feed Bin, Southwest Fabricators, 30 Tons with 13’ overhead clearance & 60 Degree Cone. Never Used, Internal coating. Needs Touch up Pai...

Tulsa, OK: Lot of Augers: Augers, Various Sizes 2 Each 4 Inch Diameter 10 Feet Length with Drive Head 3 Each 4 Inch Diameter 10 Feet Length Extens...

Tulsa, OK: Portable Truck Bottom Unloader, Baasch & Sons Inc, Dual Augers with 5 HP Motors, 230 VAC, 1-Phase and Control Panel.: Tulsa, OK ***Load...

Tulsa, OK: Rotary Valve Feeder - Bliss Model 3-RF-SCMA-12: Tulsa, OK ***Loading Fee of: $ TBD to be added to winning bidder's invoice. Loading f...

Tulsa, OK: Lot of : Tramco Drag Conveyor, Light Wear, Needs Paint, Includes: 1-Drive with Motor and Gearbox1-Drive with Gearbox1-Drive without Mot...