Specialists in Rebuilt and Pre-Owned Equipment
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 193 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

INFORMATION - All equipment is to be paid for and picked up by June 11th 2021. Rigging Fees will be charged for each lot. These fees are for loadi...

DO YOU NEED A CUSTOMS AGENT FOR THIS SALE? HERE IS A RECOMMENDATION:  YOU ARE FREE TO USE WHATEVER CUSTOMS AGENT YOU WISH   Bruno Kastropil FIVE S...

Paxall-Clybourn CHL-7 Vertical Cartoner, Serial # 211-01, Mfg 1994, 6ft-0in Carton Magazine, 16 spout Oval track, c/w Slautterback Glue System,  4...

CONTINENTAL CAN COMPANY "PANAMA" MODEL C SINGLE HEAD ATMOSPHERE CAN CLOSING MACHINE, MACHINE #200, SET FOR #10 CANS (603 DIAMETER), BRASS WORM SCR...

Graseby/Goring-Kerr 402 Gravity Feed Metal Detector, Model #: DSP.SH.C2DI, CLASS:II , Div.1, Group: F,E & G, Serial #: 21668, 24vdc., 1amp., Openi...

40 Cubic Feet Stainless Steel Double Cone Blender, 2B finish, 60” dia x 21” Long cones, 12” straight section, M/S Painted Mounts, 220/380v, 7.5hp ...

Little David LD 00 Top and Bottom Case Sealer, 2" Tape Heads, Extra-long side belts, Portable, in excellent condition Rigging/Loading Fee: $50 .....

ALL-FILL TWIN AUGER FILLER, MODEL TA, SERIAL #1276925,SS CONTACT, C/W SHORT COLUMN & MOUNTING FLANGE, NO CONTROLLER, IN GOOD CONDITION Rigging/Loa...

ALL-FILL TWIN AUGER FILLER, MODEL TA, SERIAL #1276925,SS CONTACT, C/W SHORT COLUMN & MOUNTING FLANGE, NO CONTROLLER, IN GOOD CONDITION Rigging/Loa...

ALL-FILL TWIN AUGER FILLER, MODEL TM, ,SS CONTACT, C/W SHORT COLUMN & MOUNTING FLANGE, NO CONTROLLER, IN GOOD CONDITION Rigging/Loading Fee: $50 ...

UVA Packaging LIMA NX 250C Vertical Form Fill Seal Machine, All Servo, continuous motion, square bottom former. Up to 200 PPM, Siemens touch scree...

LOMA 6000 MW CASE Check-weigher,  Capacity: 40 KG (88Lbs) 20" Wide x 33" Long single belt unit, serial # 680170, SS frame, photo eye, OEM Calibrat...

KALISH B1 Single Chuck Cap Capper, Model #5700, Serial # 0156, Yr of Mfg: 1993, Semi-Automatic, Table Top, Twin Chuck unit with one chuck only, Ai...

WEPACKIT 400 TT Auto Top only Case Sealer c/w 3" Rebuilt Dekka SS Taper head, High Capacity machine: up to 35 cases per minute, Fully automatic, 6...

SS Roller Conveyor, 30" wide x 12'-0" long, ,Low level unit with 6" legs, Al SS Construction, in excellent condition Rigging/Loading Fee: $25 ......

Videojet 3120 Laser Marking System Coder with Advantage air cleaner system, Model 3120-IP65, Serial Number 11228003LWD, Marking speeds up to 1200 ...

Ishida 14 head rotary combination net weigher, model: CCW-R 214W-1S/15-PB. Serial # 50191, year of mfg: 2007, in excellent condition, calibrated &...

Ishida 14 head rotary combination net weigher, model: CCW-R 214W-1S/15-PB. Serial # 50192, year of mfg: 2007, in excellent condition, calibrated &...

Little David LD16A, automatic top & bottom case sealer, Serial # 440212616A, Side Belts, c/w 2" tape heads,110v, 1/3hp motor, guarded with electri...

Loma 7000 Check-weigher, 3 belt unit, infeed conveyor 28" long, weigh area 12" long, exit conveyor 31" long x 5" wide, push arm reject, 110v, foot...

 Mel-ton Hot Melt Glue System Model 8KG, Serial # 3885, 230v/400v., c/w 1 used 8 ft. Hose Vacuum feeding system, C/W 18" X 30" LONG X 24" C/S STAN...

AERZEN GMA 12.4 Roots Rotary Piston Vacuum Blower, Type GMA 12.4,c/w 15 HP Leeson Wattsaver motor, 2760 RPM. 575v/3ph/60hz.,MFG 2006, in Excellent...

Aerzen Delta Blower c/w 30hp motor, Serial # 34850, Capacity V 48 L, Working Pressure: PS 1.1 Bar, Working Temperature: -10/+150 deg. C, Blower In...

Panama Can Seamer, Model-306-S-1, Automatic, Set for 202 cans, Serial # 1061, Good working condition Rigging/Loading Fee: $50 ...[more]

Tufflex TF622-TB Top & Bottom Random Case Sealer C/w Reconditioned 2" HSD 2000 NC Tape Heads, Serial # TM 108 O4G 02, 115V/1Ph/60Hz. 6 Amp., PSI90...

Kason MO/PS/SS Stainless Steel Centrifugal Sifter Serial # 7049, Dimensions 18" dia x 25" long Body, Last used to sift sugar .Capacity for Foods: ...

WITTENSTEIN ALPHA VDH-080-MF1-28-051-0C0 SERVO Gear Reducer, lot of 3, In excellent like new condition Rigging/Loading Fee: $50 ...[more]

Videojet Laser Marking system, Model 3430, Serial # 08302001XWD, 120v/1ph/50/60hz. 20amp. WL10.3UM & 1 Model S10. c/w 1 Fumex Exaust system, Riggi...

Videojet Laser Marking system, Model S10 Encore. c/w Stand, QWERTY controls, Videojet Laser Marking system, Model S10 Encore Rigging/Loading Fee: ...

Marchesini PS500 Automatic Case Erector / Packer / Sealer.Serial # 97001, Mfg:1997, In excellent condition with low production hours, Designed for...

Semi-Automatic Unimex KC-17 Can Closer/Seamer, Serial # 7711-7 in good working condition, set for 401 cans, 208V/3PH/60HZ Rigging/Loading Fee: $75...

401/502 Roll through labeler, cold glue, handles 401 & 502 cans, in good working condition, MFG: in Europe, last used in a food plant. Rigging/Loa...

Barry Wehmiller Hayssen Servo II 13-19HR Vertical Form Fill Seal Machine, Allen-Bradley SLC50/3 PLC controller with "ladder logic" software and CT...

35 cuft SS Double Ribbon Blender, Dimensions: 60" long x 32" wide x 35" deep, 5/16" thick walls, 3/8: thick Ribbons, 3" dia. Shaft, 6" dia Center ...

PFM Falcon Flow Wrapper, Serial #4351, 220v, 2.1amp., c/w Markem 9840 coder, in good condition, last used in a food plant Rigging/Loading Fee: $10...

FITZ MILL Model K Comminuting Mill, Rebuilt with New SS Frame & Castors, New Electrics, 15Hp Motor, 460v/3ph/60hz., 1765 RPM, 8' x 14" Opening, c/...

PMI Vertical Cartoner with 10" pitch & a Volumetric filler, was running a siftproof carton (Glue system not included), rebuilt by PMI 1996, Has be...

Rovema VPRS-250 Vertical Form Fill & Seal Rotoseal, c/w 8 cup Rovema volumetric filler,(#VDX5/3111) Serial #1744, 11" sealing jaws, INCOMPLETE, Re...

Resina LC Single Chuck Capper, Set to handle Gallon containers,.rebuilt, with new electrics & Lexan guards with interlocks. 4" wide conveyor, 45mn...

Damark APS ST1624 Full Auto L Bar Sealer, Serial #5045, 220v/1ph/60hz, 1/8 hp motor, Portable, 102" long x 46" wide x 60" high Rigging/Loading Fee...

Ishida SS Rotary 12 Bucket Scale, Model CCW-Z-212P-ZM/05PB, Serial # 13677, Year of Mfg. 1994, All SS Contact,Split Scale Model, Hi-touch operatio...

DICO 4 Head Pick & Place Capper, Serial number: 2540, SS Construction, Dico Cap sorter, up to 250BPM, Rated at 15 lb. Torque, Last used in Food Pl...

3M 12 RF Top and Bottom Case Taper, Model 18700, Up to 8 cases per minute. Case size range: Length 10" to 24", Width 8" to 19-1/2", Height 6" to 2...

IMC 401 Can Seamer, Model 178, Automatic, Serial# -824, In Good condition Rigging/Loading Fee: $100  ...[more]

Silveson GX 15 High Shear Vertical Mixer c/w OEM D/Lift Stand, 15hp motor, 575v/3ph/60hz. Good Condition, Requires bottom Stator Rigging/Loading F...

Hilge/Gundfos Centrifugal SS Pump, Model #HYGIA-Super 11/60A, c/w 7.5hp x 3400rpm motor, 208v, 3" Acme inlet/outlet Rigging/Loading Fee: $25 ...[...

QDP All SS Case Erector Model C1400, Serial 0659, Yr 2007, 2" Tape, Portable, Small Footprint: 03 long x 52 wide x 78 high, Operation Manual, Case...

Ross & Charles TRM 4x8 GPE Three Roll Mill, Make: Ross/Charles and Son, Model: 4 x 8GPE, Serial #:1436, Water Cooled, c/w c/s Stand, SS Contact Ri...

Thimonnier D6.1P Filler & Sealer for Doypack Stand-Up Pouches, Serial # 290-A-82643, MFG.2001, SS Const, Nitrogen Flush, 380/600v/3ph/50/60hz. 30A...

13. Cintex  CS2000 3 BELT CHECK WEIGHER, SS FRAME, 36” LONG, EACH BELT IS 5 ½” WIDE X 12” LONG 110V Rigging/Loading Fee: $50 ...[more]

13. SS C300  Multivac Vacuum Bag Sealer, 18" X 18"x 3"Deep Sealing Area, Double Seal Bars, Portable, Busch Vacuum Pump, 220v/1ph/60hz. Good condit...

Signode Top & Bottom Case Taper,  Model UCS 2024HD-2,  Serial # 1016,  c/w 2” Intertape heads, Side Belts, can handle cartons down to 4" wide, foo...

Ishida 14 Bucket Rotory Combo net weigher, CCW-R-214W 1S/15-PB Serial # 50191, Mfg 2007, INCOMPLETE, No Buckets Rigging/Loading Fee: $100  ...[mo...

MARSH INK JET CODER ENCORE, EN300 Ishida 14 head rotary combination net weigher, model: CCW-R 214W-1S/15-PB. Serial # 50191, year of mfg: 2007, in...

Labelaire Model 2111 Pressure Sensitive Labeler, Serial #6-850-06, 115v, 4 1/2" Web, T Stand Rigging/Loading Fee: $75 ...[more]

3M 200a, Top & Bottom Case Taper, KS, Model 39200, with 2” Accuglide Tape Heads, New Bottom Belts, Portable, 115v/1ph/60hz., 1.9amp., 220 Watts No...

Acraply PS Label Head Rigging/Loading Fee: $25 ...[more]

Slaughterback Glue System Rigging/Loading Fee: $25 ...[more]

Hobart 20Qt Planetary Mixer Rigging/Loading Fee: $25 ...[more]

3M 77r Top & Bottom Random Case Sealer, Model # 38800, Serial # 00599, Rebuilt 2” Accuglide Tape Heads, Top & Bottom Belts, Portable, Power: 110v/...

Loading...Loading...
  • Lots per page
  • 60

Recently Viewed Lots