Weldotron automatic L-Bar sealer, model 5981, serial number FR 30959, 220v, vacuum attachment, 24 in. maximum width powered film rolls, 16 in. wid...

Shanklin semi-automatic L-Bar sealer, model M22, serial number M9003, 220v, 30 in. maximum width powered film rolls, currently set with 16 in. wid...

Weldotron L-Bar sealer, model 6402, serial number EP43264, 24 in. maximum width film rolls. ...[more]

Weldotron L bar sealer, model number 5202A, serial number KW52552, 220 volt, 20” and 28” sealing bars.

Pack All L-Bar sealer, model 13 X 13CTMP, serial number 3152. ...[more]

Seal-A-Tron Kombi Rapper L-bar case sealer, serial number KRI98070, 20 in. long x 11 in. wide L-bar sealer, 16 in. wide x 10 in. tall x 24 in. lon...

Vacuum Packaging Machinery dual chamber vacuum bag sealer, serial number 985008, built in 1998, chambers measure 22” wide x 16” tall x 1” deep, 3 ...

Multivac model AG80 dual chamber vacuum/gas bag sealer, serial number V1560, chambers measure 25 in. x 31 in. x 3 in.m 220v, with vacuum, gassing ...

Multivac model AG80 dual chamber vacuum/gas bag sealer, serial number V1558, chambers measure 25 in. x 31 in. x 3 in.m 220v, with vacuum, gassing ...

Seal Master 420 bag sealer, type 420.SA, 17 in. wide sealing jaws, foot pedal activated, 110 volt, mild steel frame, manual cut-off knife.

Aline Heat Seal Cooperation bag sealer with vacuum assist, model number HDV-100VS, serial number 19730-1, 96" long x 3/4" wide sealing bar, adjust...

Hartness hot melt case gluer, model 240-C, serial number 1610-4, 16 in. wide by 36 in. long infeed belt feeding 7 1/2 foot long side gripping belt...

Best Pack fully automatic top and bottom drive edgesealer, model 6HRM, serial number 906003, fully adjustable, powered roller infeed, pneumatic p...

Bivans model Convey-O-Mat, serial number 06-54L-52, adjustable magazine and guide rails, containers are then pulled and formed, pneumatic powered ...

Bivans model Top Closer, serial number 89-82-99, designed to close the tops of cartons, 110 volts, 60 HZ, single phase, 14 amps, all mechanically ...

Rockford-Midland model 457-BHMS top only case sealer, serial number 10959, with an ITW-Mercer hot melt glue system, fully adjustable with 8 in. wi...

Shanklin over wrapper, model F-6, serial number F8532, 220v, 42 in. maximum width powered film rolls, currently set with 18 in. wide film doing 3 ...

Litton vonGal model SPLX-MK11-4048-LH-SEPD case palletizer, serial number 2612, set for 40” wide x 48” long pallets, capable of handling up to a 7...

FMC model 445M case palletizer, serial number HH743, set for 40” wide x 48” long pallets, capable of handling 48” tall pallets, electronic sensors...

Columbia palletizer, fully adjustable but currently set 48” x45” pallet size, powered roller infeed with case turner, slip sheet inserter with adj...

Filper brite can palletizer, 52” wide by 10 foot long thermoplastic belt bed for accumulating cans against the forming bar, 82” belt height, pneu...

Filper brite can palletizer, serial number 600316, 51” wide by 14 foot long thermoplastic belt bed for accumulating cans against the forming bar, ...

Alvey model 600 full case Unitizer, serial number K04731, low level infeed, cases come in on a 16 in. wide by 9ft long infeed belt to the forming ...

HI-Speed Computa-Weigh 2 check weigher, model number 01, serial number 07-1940, .25 hp electric motor drive, 120 volts, single phase, 60 HZ, 1.5 a...

Mild steel skate conveyor, 17” wide x 40” long when collapsed, mild steel construction, on casters.

Mild steel skate conveyor, 17” wide x 40” long when collapsed, mild steel construction, on casters.

12 in. wide x 4 ft. long Newlin rough top case conveyor, all stainless steel construction, with drive.

Case conveyor, 18” wide x 19.5’ long, ½ HP electric motor drive, mild steel construction.

16” wide x 60” long 45 degree Roach case conveyor, serial number SN31898, mild steel construction, requires drive.

21-½” wide x 55” long mild steel roller conveyor, free roller, mild steel construction.

16” wide x 2.5 ft. long mild steel case turner, dual 2-1/2” wide belts, 110 volts, mild steel construction.

10” wide x 18’ long Coastline Equipment Inc. stainless steel incline conveyor, model number 6050, serial number 6028, 9” infeed height, 28” disch...

BWM/Agnew Inc. model 2-603 Intralox belt 36 in. wide x 16 ft. long accumulation conveyor with side guide rails and a two-lane divider single filer...

48 in. wide x 20 ft. long bi-directional accumulation table, microswitch sensors, mild steel frame, thermal plastic chain, requires drive motor.

24 in. wide x 5 ft. long stainless steel accumulator table with stainless steel bed and mild steel frame. ½” X 1” stainless steel open top chain, ...

WeighTronics barrel / tote electronic scale, model WI-127, serial number 001328, 24 1/2 in. wide by 26 in. long roller track, electronics tested g...

Emery model 180-4EM-1K platform scale, 1000 pound capacity, 3 ft. x3 ft. platform with ramp.

Bishamon model EZ-300 scissor lift, 3000 pound maximum lift, with 36” diameter round turntable, 30” maximum height.

Weilliver Metal Products Corp. product counter, model number 50045, serial number 04120, 10” wide x 36” long, 1” tall cleats every 7”, 2” cut out ...

Product count filler, 33” wide x 17” long x 24” deep tapered hopper infeed, 4 rows with 3 each Syntron magnetic feeders with electric eye product ...

Single head auger filler for powders or granular products, table with mechanical scales w/ micro switch shut-off. Cycles and fill volume electrica...