Bergmann TYPE PS 8100 AH COMPACTOR, net weight 750kg, excellent working order and condition, (ref 896), purchasers will be assisted with loading a...

Rotoval 80 F.V.P.FILL VENT VALVE, unused condition, body c.i.flaps.s.s. with polyurethane seal, double acting cylinder with 5 port solenoid valve ...

DMN Rotary Valve 200 Size, complete with drive ref 2419 purchasers will be assisted with loading and the lot is available for viewing & collection...

DMN Rotary Blowing Valve Type BL250, 4 in line size c/w geared motor drive ref 2418 purchasers will be assisted with loading and the lot is availa...

Rotoval Rotary Valve Type HD250, complete with drive ref 2416 purchasers will be assisted with loading and the lot is available for viewing & coll...

BVC BLOWER/EXHAUSTER complete with 3kW drive, all in working order, fitted with intake filter,76 mm table "d" inlet and outlet capable of a range ...

AS NEW POWERED/GRAVITY ROLLER TRACK, rollers 50mm x 450mm wide @ 100mm pitch supports aluminium extrusions and legs, approx. 20 metres available (...

TWIN SCREW DISCHARGER 10in x 9ft 6in o/all, inlet 7ft x 2ft approx., complete with drive in good order (ref 2133), purchasers will be assisted wit...

Redler CHAIN & FLIGHT TUBULAR ELEVATOR 200mm x base length 1800mm, vertical height to outlet 2900mm, all in good order but requires motor which ca...

CHAIN & DISC ELEVATOR (manufacturer not known) unused exhibition unit, stainless steel with nylon flights 100mm x 2.5 metre centres fitted gearbo...

18in Wide Tray Type Vibratory Feeder complete with controller, all in good working order (2377), purchasers will be assisted with loading and the ...

Turner 8 x 4 DOUBLE DECK SCREEN fully refurbished and in good working order, screen supplied to requirements (2360), purchasers will be assisted w...

Rotary Blower Valve by "DMN" TYPE BL250/1 Serial No 06224,16 Rpm Final Chain Drive, Ref 2410, purchasers will be assisted with loading and the lot...

Rotary Valve BY Rotolok Type 30RVSCMO1BV Complete With Geared Motor And Final Chain Drive All In Good Working Order, Cleaned And Tested. Serial No...

Buhler Rotary Valve Type MPS 22/22, bare shaft complete with sight glass, no drive can be supplied at extra cost, ref 2323 purchasers will be assi...

Rotary Blower Valve Type Rotolok 200 complete with drive ref 2234 purchasers will be assisted with loading and the lot is available for viewing & ...

10" dia Rotary Valve 8" square outlet complete with drive ref 1978 purchasers will be assisted with loading and the lot is available for viewing &...

Orwak 5031-E BALER in working order works from 13 amp single phase socket ref 2050 purchasers will be assisted with loading and the lot is availab...

Rootes Type Blower, complete with drive 30 kw in working order ref 2405 purchasers will be assisted with loading and the lot is available for view...

Vacuum Pump, complete with 11kW drive model RKR SCL 70 SH, serial no.R290 5.5 m3/min in working order ref 2305 purchasers will be assisted with lo...

Hopper 2.7 metres x 1.05 metres x 838 mm deep terminating in outlet 2.7 metres x 165 mm, flanged top and bottom c/w support legs and top extensio...

Mixer Top Feed Hopper from Simon Baron Series 2 Mixer approx dimensions 2143 long x 1130 wide fits top flange of mixer and has epo bomb door outle...

Matcon Plastic Tote Bin, approx 1m square x 1.2 tall complete with 500mm dia lid and standard Matcon discharge outlet ref 1876 purchasers will be ...

MILD STEEL COOLING SCREW CONVEYOR unused new condition 900mm dia. x 400mm pitch, o/all length 6006mm, jacketed and double skinned, screw flight fo...

MILD STEEL COOLING SCREW CONVEYOR unused new condition 900mm dia. x 400mm pitch, o/all length 6006mm, jacketed and double skinned, screw flight fo...

UMT BOX COOLER XEK 25 x 25, in excellent condition complete with under hopper and supports, includes cyclone dust collector, rotary discharge va...

Buhler SILO DISCHARGE ACTUATOR, 1200 mm dia., with new vibratory motor, ref 2361, purchasers will be assisted with loading and the lot is availabl...

Simon Solitec SILO DISCHARGE ACTUATOR, 600mm dia., mild steel, ref 2225, purchasers will be assisted with loading and the lot is available for vie...

Spirotec TOTE BIN/BAG DISCHARGE STATION, in stainless steel contact parts with Flexicon discharge conveyor all in good order, ref 2186 purchasers ...

Simon Solitec SILO DISCHARGE ACTUATOR, 5ft dia in good condition, ref 2150, purchasers will be assisted with loading and the lot is available for ...

Twin Ribbon Screw Discharger, 200mm x 3metres bep complete with drive all in good working order, ref 2134, purchasers will be assisted with loadin...

Iserco SILO DISCHARGE ACTUATOR, 1800mm diameter in good working order, ref 2061, purchasers will be assisted with loading and the lot is availabl...

RIBBON BLADED SCREW DISCHARGER/AGITATOR, 438mm wide x 1828mm long, one outlet 438mm x 228mm, 584mm centre from drive end complete with torque arm ...

Simon Barron Screw Bin Discharger, 1651 x 8" twin, fitted with 1066mm x 505mm inlet, geared drive but needs motor, ref 852, purchasers will be ass...

Twin Screw Discharger, bare shaft, drive available at extra cost, 3.15 o/all with inlet 1.44m x 500mm wide i/s dimensions drive to be at inlet end...

Internovi "Z" BUCKET ELEVATOR in stainless steel all in good working order, type P52, 15 cu m/hr capacity, ref 2436, purchasers will be assisted w...

Law Denis BUCKET ELEVATOR, type BBN14, 4.75 metres o/all height, complete with bag tip booth all in working order, ref 2253, purchasers will be a...

IFE Industrie Austria Vibratory Feeder, in stainless steel, type VSR 10-415, serial no E202 213-01-1, 407 volts 10 amps 50 cycles,110 volts- 1 amp...

18in Wide Tray Type Vibratory Feeder, complete with screen deck and with variable speed controller all in good working order, ref 2379, purchasers...

Small Screw Feeder, 80mm dia complete with drive mounted on load cells, ref 1891, purchasers will be assisted with loading and the lot is availabl...

Buhler Discharger/Feeder Chain And Flight, volumetric extraction from bins 800 mm wide with 700 mm diameter inlet flanged and variable speed drive...

INSERTABLE DUST FILTER, Type DLM-V200 F.G5, in good working order complete with new filter medium, ref 2443, purchasers will be assisted with load...

INSERTABLE DUST FILTER, Type DLM-V200 F.G5, in good working order complete with new filter medium, ref 2443, purchasers will be assisted with load...

Dustcheck REVERSE JET DUST FILTER, type SF.J2-1-06-FO, c/w 1.1kW fan circa 2010 very good condition, ref 2414, purchasers will be assisted with lo...

Dustcheck REVERSE JET DUST FILTER, type SF.J2-1-06-FO, c/w 1.1kW fan circa 2010 very good condition, ref 2414, purchasers will be assisted with lo...

DCE FREESTANDING DUST FILTER, type UMA 153, with K3 fan,1.5kW circa 2009 c/w control panel all in excellent condition flameless explosion relief, ...

Nederman Extraction Arm, for use with dust filter as flexible/adjustable dust or fume extraction, ref 2334, purchasers will be assisted with loadi...

J B Thorne now Carter Dust Extraction 0121 250 1416.FREE STANDING FILTER MECHANICAL FILTER SHAKE, two collection buckets ,explosion panels enclose...

Master Magnets INLINE TUBE PERMANENT MAGNET, 200 mm, in good working order, ref 2439, purchasers will be assisted with loading and the lot is avai...

Eriez MAGNETIC DRUM SEPERATOR, 380mm dia x 750mm wide nominal throughput 96 cu m/hr, overall dimensions 867mm x 635mm x 762mm high, ref 2430, purc...

Eriez Permanent Plate Magnet, 340mm x 650mm, in good condition, ref 2425, purchasers will be assisted with loading and the lot is available for vi...

Inline Twin Basket Molasses Strainer, in good working order, ref 2356, purchasers will be assisted with loading and the lot is available for viewi...

Dinnissen TWIN PADDLE MIXER, m/c no 920348, 1992, SCH/MFNGER Type VCC-700 in good working order approx 700 litre capacity - 420 kgs 5.5 kw drive ...

Ottevanger HORIZONTAL MIXER 1 TONNE COMPLETE ON LOAD CELLS with motorized outlet slide approx dimensions 2.9 metres long x 1 metre wide x 1.1metre...

Simon FALCON IV GRINDER, in good working order, last used Dec 2013, slow speed grinding, with direct coupled 110 kw motor 1500 rpm, model 2, 1 met...

COMPLETE ROLLING PLANT comprising Booth Roller with single drive motor 20 hp, hydraulic roller pressure, vibratory feeder, take-away elevator and ...

Christy & Norris LB7 Hammer Mill, complete with direct coupled discharge fan and feeder, bare shaft needs 15 hp motor and drive, ref 2252, purchas...

Ludwig Pallmann Type PP6 Turbo Mill, ref 2129, purchasers will be assisted with loading and the lot is available for viewing & collection from Sto...

Simon Barron 530 LE-COQ ROTARY BRUSH SIFTER in good working order c/w 7.5 kw motor ref 2433, purchasers will be assisted with loading and the lot ...

Siruba Hand Stitcher type AA-6 complete with spare string, ref 2441, purchasers will be assisted with loading and the lot is available for viewing...