Refine your search
Primary Category
Category
Brand
Item Type
- Tank (27)
- Screen (11)
- Separator (7)
- Evaporator (6)
- Plate Heat Exchanger (6)
- Pump (6)
- Storage (4)
- Storage Tank (4)
- Balance Tank (3)
- CIP Tank (3)
- Centrifugal Pump (3)
- Condenser (3)
- Hopper (3)
- Parts and Accessories (3)
- Pitting Machine (3)
- Refrigerator (3)
- Agitator (2)
- CIP Tanks (2)
- Filler (2)
- Kettle (2)
- Mix Tank (2)
- Mixer (2)
- Pulper (2)
- Vertical Tank (2)
- Accumulation Table (1)
- Blower (1)
- Cap Elevator (1)
- Cap Sorter (1)
- Capper (1)
- Centrifuge (1)
- Chart Recorder (1)
- Commercial Dishwasher (1)
- Conveyor (1)
- Cooling Tunnel (1)
- Dishwasher (1)
- Dryer (1)
- Freezer (1)
- Heat Exchanger (1)
- Industrial Peeler (1)
- Jacketed Tank (1)
- Metal Detector (1)
- Piston Filler (1)
- Sanitation Equipment (1)
- Scale (1)
- Size Grader (1)
- Sorter (1)
- Tunnel (1)
- Vacuum Pump (1)
- Water Heater (1)
State/Province
Town/City
Filtered by:
- Primary Category
- List
- Grid
-
86 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Steam Peeler System
Odenberg steam peeler system, model RF1750, consists of receiving/feed hopper, live bottom with load cells, approx 36" x 60" x 36" deep to steam p...
Rotary Sizer/Grader
Farmco rotary sizer/grader, approx 5' x 7' x 8' high, with (18) 4" dia sizing rollers, discharge chute, 3hp/1760, 208-230/460v, 3ph/60hz, tubular ...
Pre-Wash/Soak Tank
Pre-Wash/Soak Tank, approx 6-1/2' x 9' x 44" deep, with 6' wide X 12' long inclined conveyor, cleated belt x 3" high @ 6-1/2"intervals, 1hp drive ...
Peach Pitters
Langsenkamp peach pitters, approx 30" long chamber, 16" dia at feed, 24" dia at discharge, 20" x 10" feed opening, with brushing sections, 10hp dr...
Peach Pitters
Langsenkamp peach pitters, approx 30" long chamber, 16" dia at feed, 24" dia at discharge, 20" x 10" feed opening, with brushing sections, 10hp dr...
Peach Pitters
Langsenkamp peach pitters, model M2511, s/n A.291, approx 20" diameter x 30" long stainless steel chamber with brushes, new in 1995, feed hopper, ...
Decanter Centrifuge
Westfalia Separator decanter centrifuge, model CA-365, s/n 1674-825, approx 18" dia x 48" OD, 4000rpm max bowl speed, 55gpm capacity ratings, 2.0 ...
Separator Tank
Rossi & Catelli separator tank, 36"dia x 6' straight, x 24" cone bottom separator tank, 16" dia, bolted top side MH with 12" dia bottom connecting...
Rectangular Tank
Rectangular Tank, approx 30" x 40" x 40" deep, open top, with level water level floater, stainless (Subject to Entirety Bid Lot 197)
Vertical Tank
Vertical Tank, approx 44" dia x 9' straight x 24" cone bottom, dome top, with 3" dia tri legs, side bottom MH, (3) 3" and 2" dia top ports, center...
Rotary Coil Hot Break
Fran Rica rotary coil hot break, 1500lbs capacity, @ 30ton/hr rated capacity, approx 64" x 68" x 77" straight, 24" U-bottom, cone top, with approx...
Rotary Coil Hot Break
Fran Rica rotary coil hot break, 1500lbs capacity, @ 30ton/hr rated capacity, approx 64" x 68" x 77" straight, 24" U-bottom, cone top, with approx...
Caustic Tank
Caustic Tank, approx 9' dia x 14'straight, 7,000 ga capacity, with 4" dia x 36" high legs support, dish bottom, 14" x 18" side MH, center bottom d...
Pulper
Fenco pulper, model DT800, 200 Ton/hr rated max capacity, approx 18" dia x 21" OD, finishing chamber, with 45/52kW, 380-460v, tubular frame suppor...
Juice Tank
Juice Tank, approx 40" dia x 64" high with 2" dia x 30" high legs support, 16" dia top MH, 2" dia top port and overflow, stainless
Cone Bottom Tank
Cone Bottom Tank, approx 48" dia x 42" straight x 48" cone bottom, 4" dia bottom discharge/tail pipe to pump, tri clamp, sight glass, temp probe, ...
CIP Tanks
[LOT] of (2) CIP Tanks , approx 48" x 9', cone bottom, with 2" x 36" high legs support, multiple ports, from 2" to 3" dia, top MH, (NOTE: 1 tank h...
Vertical Tank
Vertical Tank, approx 48" dia x 92" high with 24" high tubular legs support, 16" x 20" side MH, center bottom discharge, 2" dia top port, lid cover
2 Effect Evaporator System
BUFLOVAK 2 effect evaporator system, Patent nos. 124428, s/n 9266, with vertical primary and secondary steam HEX to (2) vapor separator vessels, 1...
Metal Detector Circuit Loop
[LOT] of (2) Metal Detector Circuit Loop, approx 8" dia, in-line, plus associated valves and tri clamp fitting within the loop, plus (1) mobile sa...
Product Tank
Product Tank, approx 8' dia x 10'high with 30" high legs, cone top and bottom, 20" x 20" top MH, (3) top ports, center bottom discharge, threaded ...
Product Tank
Product Tank, approx 8' dia x 10'high with 40" high legs, cone top and bottom, 20" x 20" top MH, Lightning Mixer, (3) top ports, center bottom dis...
Sanitary Process Circuit Loop
[LOT] Sanitary Process Circuit Loop, with (4) Bunting in-line magnet separators, (16) 3" dia ball valves, (2) butterfly valves, plus tri clamps an...
Single Effect Evaporator
Rossi & Catteli single effect evaporator, model T8, s/n 1136, with 300gal capacity, vapor separator, approx 48" diameter x 10' high vapor body, co...
APV single effect evaporator system (Group Lots 246 to 253) [Subject to individual Lot Bids]
APV vapor separator vessel/single stage, approx 42" diameter x 6' straight, 12" cone bottom, 20" dia MH, 4" dia center bottom discharge, 20" x 10"...
Balance Tank System
Waukesha balance tank system, model 130, including 10hp PD pump, approx 36" dia x 30" deep balance tank with hinged lift up lid cover with multipl...
Pre-Heat Plate HEX
APV pre-heat plate hex, model SR-95A, WO# 17655, packed with (90) stainless plates, approx 25" x 66",8" diameter inlet/outlet with 4-eye closed de...
DCI stainless rectangular chiller water tank, s/n 89D38306, 2000 gallons capacity, approx. 116" x 64" x 6'high, with (2) top MH, multiple top port...
Plate HEX
APV Crepaco plate HEX, model R56, s/n 23973, with approx. 43 stainless plates, approx. 18" x 60", 4" dia. inlet /outlet ports, plus (1) Triac actu...
Pilot Lab Evaporator
ALA Engineering pilot lab evaporator, s/n 996224-1, 900liters primary, 17liters secondary capacity ratings, approx 36" dia vapor separator body, 1...
CIP Tank
ALA Engineering cip tank, s/n 99-6224-3, approx 24"dia x 28"high, with 8" high legs, -10/3 design pressure, VAC/4.5 test pressure, 5/140 degC, 235...
Dewatering Screen
Sprout Bauer dewatering screen, model 552-36, s/n 870527, parabolic, approx 36" wide, stainless
CIP Tanks
[LOT] of (2) CIP Tanks , approx 30" dia x 60" high with 24" high legs support, 16" dia top MH, 4 top ports, on tubular skid, stainless
Jacketed Tank
Jacketed Tank, 48" dia x 48" deep OD, with hinged lift up lid cover, 6 top ports, stainless
Mix Tank
Mix Tank, 1894 gallons capacity, approx 6' dia x 8' high, with 16" dia top and 16" x 20" side MH, 3 top ports, agitator mounting bridge, with agit...
Cook Kettle
Cook Kettle, model C20-69- COOK, s/n 1465, 1000 gallons capacity, atmospheric vessel, NBN 255, jacketed @ 125PSIMAWP, 355 degF, with top mount ful...
Cook Kettle
Lee Industries cook kettle, 1000 gallons capacity, atmospheric vessel, NBN 4200, jacketed @ 125PSIMAWP, 353 degF, with top mount full sweep agitat...
Storage Tank
JV Northwest storage tank, 10,000 gallons capacity, approx 12" dia x 12' high, 24" cone top and bottom, 2 top ports, with 16" x 20" side MH, 4"dia...
Storage Tank
JV Northwest storage tank, 10,000 gallons capacity, approx 12" dia x 12' high, 24" cone top and bottom, 2 top ports, with 16" x 20" side MH, 4"dia...
Forced Circulation Evaporator
APV forced circulation evaporator, with essence recovery column, last operated around 30 - 35 GPM, includes vapor body measuring 6' diameter X 8' ...
2-Effect Evaporator/Concentrator
APV 2-effect evaporator/concentrator, 30 GPM capacity ratings, includes 36" diameter ParaVap Separator with APV HEX including approx. (36) 18" wid...
Cooling Tunnel
I&H Conveying & Machine Co. cooling tunnel, cooling tunnel, approx 10' wide x 45' overall length, tunnel is 35' long, includes top mounted spray b...
In-Line Filler
Simplex in-line filler, 4-head volumetric piston filler, cam action, automatic, up to 6liters/single fill head, 0.66 to 206fl oz fill capacity, de...
Auto In-Line Capper
In-Line Filling System auto in-line capper, including spindle capper, with cap tight/bottle spacer and gripper/cap sorter/conveyor and spindle dia...
Accumulation Table
Sentry accumulation table, approx 4' x 9', with modular belt
Open Top Tank
Open Top Tank, approx 42" dia x 36" high, mobile base, with level floater, stainless, front bottom discharge, stainless
Balance Tank
Balance Tank, approx 42" dia x 36" high, mobile base, with hinged lift up lid cover, (6) top, side and bottom ports, stainless
Balance Tank System
Balance Tank System, with approx 30" dia x 40" deep tank, pneumatic valve, all stainless, plus (1) tube heat exchanger, centrifugal pump, steam co...
Pre -Heat System
APV-Crepaco pre -heat system, model R55, s/n 8036, with plate HEX on skid, tube HEX, mild steel frame, stainless contact parts, approx 16" x 5' HE...
Plate HEX
AGC plate hex, model Pro-5- R55, s/n 1029-7639, with (128) 26" x 62" HEX plates, stainless
Plate HEX
[LOT] of (2) AVP - Crepaco plate hex, approx 10" x 24" and 9" x 32" with 40 and 42 HEX plates
Plate HEX
AGC plate hex, model Pro-5- R55, s/n H133-w/o 10844, with (52) 16" x 62" HEX plates, stainless
Tube in Tube Sterilizer
Fenco tube in tube sterilizer, stainless, with (2) Bardiani Varvole Italy Type ZQ High Pressure Valves, Samson CL125 pneumatic actuator control va...
Mix Tank
Mix Tank, approx 10'dia x 12' high with approx 48" wide heating section, no agitator, with side baffle, 16" x 20" side MH, spray ball, approx 30" ...
Vitamin Tank
Vitamin Tank, approx 30" dia x 36" high on mobile base, stainless
Aseptic Filler System
[LOT] Aseptic Filler System, "FOR PARTS ONLY" as shown, all stainless contact parts and framings with scale components, control panels
-
86 item(s)/page