Alfa Laval model 9613278128, stainless centrifugal pump, approx 3"x3", 30 hp/3525 rpm, 230/460v [Loc: Filter Room] ...[more]

Alfa Laval model 9614348768, stainless centrifugal pump, approx 3"x3"10hp/3525 rpm, 240/460v [Loc: Filter Room]

Cygnet Control, stainless programmable control panel used for ozone generation with AB 1734 series PLC, Eaton power supply, Festo air control inst...

Tetra Pak, 3 ports with tubular stands and connected fittings within flow plates, plus (1) Keystone EPI actuator on the flow beside manifold, pipe...

Tetra Pak Dairy and Beverage system AB model Tetra AlBlend, with constant pressure, regulating, diaphragm control and pneumatic valves, mass flow ...

Balance Tank, 6000 liters capacity, stainless, approx 4'dia x 8'straight, cone top and bottom, bottom center discharge, 16"dia cross arm top manwa...

Alfa Laval, stainless, 15hp centrifugal booster pump, [Loc: Tetra Blending Room]

Alfa Laval, stainless, 2hp/3500rpm, centrifugal circulation pump, wash down motor [Loc: Tetra Blending Room]

Tetra Pak model Aseptic Flex, continuous indirect UHT treatment skid, split heat, mix tuning, with approx 100gallons product balance and top mount...

Tetra Pak model Aseptic Flex, with approx (6) Alfa Laval pneumatic valves associated with product, water, glycol, condensate and steam process, (1...

Tetra Pak model Tetra Therm -Spiraflo C series, 2 part shell and tube HEX system including (1) tubular holding cell,9 pass/loop, and (1) spiraflo ...

Bulk Bid - Group Lot Tetra Therm /Aseptic Flex UHT Pasteurization System With Tubular Cooling Module and Treatment Skids [Lots 214 to 216] ...[mo...

Tetra Flex -Alfa Laval model C10-KSH, stainless plate heat exchanger, 290psi@ 290degF, -20deg F @ 290 psi, 1568.6 sqft heated surface area, 1309mm...

Supply Pump Skid, including (1) 15hp/3560rpm, Alfa Laval centrifugal tower water return pump, (2) Samson diaphragm control, (1) Burkert and (1) pn...

Spirax Sarco model ES000110, condensate recovery skid with steam trap and HEX, s/n 91215 [2015] [Loc: Tetra Blending Room]

Tetra Pak, system include a 500gallons capacity balance tank, final shell and tube HEX heater to (2) pass/loop 3"dia holding tubes @ 4 second /loo...

Hope Industries System model HIS-UNI9STAG, universal mount 19" operators interface monitor on stainless pedestal mount enclosure [Loc: Tetra Blend...

Tetra Pak model Tetra Aldose, Aseptic Ingredient Dosing Skid system include dosing associated flow meter, dosing /control valves, (2) Alfa Laval c...

[LOT] Chilled Glycol Control Valves, (2) Sharpe direct mount 2 full port ball valves, (2) DFT check, (3) Alfa Laval pneumatic, (1) Samson control ...

Flow Distribution Manifold System, 5 ports with tubular stands and connected fittings within flow plates, pipes are to be cut / disconnected 8'hig...

Flow Distribution Manifold System, 6 ports with tubular stands and connected fittings within flow plates, pipes are to be cut / disconnected 8'hig...

Flow Distribution Manifold System, 10 ports with tubular stands and connected fittings within flow plates, pipes are to be cut / disconnected 8'hi...

Sanitary Pipework, overhead stainless pipe installations with fittings (NOTE; pipes and fittings included are only those that do not gets into any...

[LOT] International, (6) model 2010, (3) pressure gauges, associated gate valves on top as shown [Loc: Tetra Blending Room]

Spirax Sarco model ES000102, condensate recovery skid with steam trap and HEX [2015] [Loc: Tetra Blending Room]

Sidel model G3M, preform supply feed system includes (1) incline flighted conveyor, approx 12"x 10' (1) Sameto EBES-2200 ,s/n 14191801 @ 500kg max...

Sidel model TM24-4, 24 rotary cavity, stretch blow machine with model TMC5 predis box, 1hp, dry preform decontamination module with dedusting /asp...

ABC model 3HP-4-LT, high pressure air compressor, 1200hp, 660 rpm, 3stage, 4 cylinders, 464psi, s/n 24586 [2015] [Loc: Filling and Blow Mold Room]...

CTE model IPC-602 SIDEL/R134a-400/3/50, s/n IPSD0602CA0100 (2015), 18.0kg charge, 29bar, 72kw/154.7amps max, 3 fans top mount, Glycol  [SUBJECT TO...

Complete Blow Molder System with spare parts including Lots: 251, 255, 256, 256A, 332, 338, 354, 354A, 356, 357, 358, 360, 361, 366, 379, 380, 381...

Mitsubishi model FGR120L36-AS, 120 fill head stations dry Aseptic PET bottle filler, rated @ 900bottles/min, with 36 head rotary capper, rotary ne...

Mitsubishi, CIP interface with valve cluster, Alfa Laval, Toste and Burkert, associated sensors, pressure/temperature gauges, inlet/outlet for CIP...

Mitsubishi, product interface with valve cluster, associated sensors, gauges, inlet/outlet for product, steam and cip, sanitary pipings and fittin...

Mitsubishi, filler air control with DA type Toste diaphragm valves and double seal sequence pneumatic valves, Pall filters, Rosemount pressure tra...

CIP Return Tank, stainless, approx 57"x100"x 9" deep with single blade vortex break, 2" to 4" dia inlets, spray ball, with (1) Alfa Laval centrifu...

Work Platform, approx 24"x5', 2 steps with safety rails, grated deck, stainless frame [Loc: Filling and Blow Mold Room] [SUBJECT TO BULK BID: LOT ...

[LOT] Mitsubishi, 3 door with circuit breakers, relays, associated electrical wiring components, plus (1) dry type transformer [Loc: Filling and B...

NOM model 50, Uninterrupted power supply 50Kva, system 9390-80, 208Vac, 384-480Vdc, s/n EJ304CBCO3 [Loc: Filling and Blow Mold Room] [SUBJECT TO B...

Hope Industries System model HIS-UNI9STAG, universal mount 19" operators interface monitor on stainless pedestal mount enclosure [Loc: Filling and...

Cap Bulk Hopper, stainless vibratory bulk cap hopper approx 4'x4'x3' straight with incline flighted, approx 12" x 15' conveyor, 6 steps work platf...

CSI model ES24, LH 2500 caps/min cap sorter, RH, with sorting elevator and integrated bin metering belt, accommodate flat and sport cap, 26mm to 4...

[LOT] (5) Mitsubishi model VFD1001, 0.13hp to 1.0hp drives, Siemens Simatic programmable control, push/pull button switches, and associated automa...

Unit comes with Keyence model SJ-HO60, bar type high speed sheath sensing Ioniser, elctrode cleaning probe, electrostatic monitor, cap tube invert...

Dust Collector model VNA15Amano, Hepa filter dust collector, 480v, 3/4hp,, s/n 29761 [Loc: Cap Feeder Platform] [SUBJECT TO BULK BID: LOT 277] .....

Work Platform, cap sorting work platform, with access staircase, safety rail, diamond plate deck, structural support members, stainless, approx 15...

Mitsubishi, with PAA cap sterilization chamber and cap feeder chute/guide, approx 20'long to capper with programmable control panel, 208/120v, 100...

Aoiseko, oil mist collector with top mount blower, cartridge filter and control panel [Loc: Cap Feeder Platform] [SUBJECT TO BULK BID: LOT 277] ....

Work Platform, cap sterilization work platform with access staircase, diamond plate deck, safety rail, structural support member, stainless constr...

Lubrication Unit, with Tuthill pump, blue poly lubricant container [Loc: Cap Feeder Platform]

Bulk Bid - Complete PET bottle filler with spare parts including Lots: 257 to 276, 337, 338, 365, 375, 387, 388 ...[more]

[LOT] Sidel model SL70-Matrix, PET and HDPE bottle wrap around rotary roll fed labeler, 20 stations, type 720-20T/SM-S1/E1, product size from 1.6 ...

Sidel model SL70-Matrix, assorted change parts for 1250ml and 12oz, on (2) A framed mobile racks, including star wheels, guides, bottle discs, t...

FT System model IE720-2VA, Inline label inspection and control, 10"x18"aperture, with optical sensor, 700 series HMI, reject, stainless, 110v, 60h...

Hartness model 4520-80 F0MP, s/n 4610043 and 452006, Global shrink multi packing, shrink pack overwrapping machine with 6 and 3 lanes mass flow c...

Hartness roll Lifter, Mobile film roll lifter [Loc: Packaging Area]

TEVA model RVA 870 version 7, Evaporative cooling tower, 2 fans @ 7.5hp, 837Kw max, 400v/680v, with Grundfos EAC-IE2-IE3 pump, s/n 27744 [2015] [L...

Wessel, industrial water tank, approx 24"dia x 36" [LOC: UV room]

Vulcatherm model 835834-04, temperature controller, 75kw, 400v, 137Amps, 10 bar, s/n A591808A [2014] [Loc: Mezzanine by Blow Mold]  [SUBJECT TO BU...

Bry Air model MP1200, desiccant air dehumidifier 3hp -Pro, 1hp-RCT, 240Kw, 460v/3ph/60hz, s/n 2015E10172 [Loc: Mezzanine by Blow Mold]  [SUBJECT T...

Bry Air model MP1200, desiccant air dehumidifier 3hp -Pro, 1hp-RCT, 240Kw, 460v/3ph/60hz, s/n 2015E10173 [Loc: Mezzanine by Blow Mold] [SUBJECT TO...