31
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
31
PINES Hydraulic Rotary Bending Machine, Counter Clockwise Bend
Model 1
SN 11035-78421
Capacity:
Round tubing, mild steel 1 ½” x .188” wall
Schedule 80 steel 1” x .179” wall
Square tubing, mild steel 1 1/8” x .120” wall
Round bar, mild steel 1 1/8”
Square bar, mild steel ¾”
10” maximum radius
180 degree maximum bend angle + overbend for spring back
+/- ¼” bend angle accuracy
9’ 11” maximum recommended tube length
17 RPM bending arm speed
7.5 HP hydraulic unit motor set on 220/3/60VAC
1,000 PSI operating pressure
2527 ft lbs torque
41 gallons reservoir capacity
Dimensions:
144” x 48” x 35”H floor space required
2,750 lbs approximate weight
Machine includes auto indexing degree of bend turret, distance-between-bend stops, auto slide lube,
mandrel rod stops, free-standing control cabinet.
F.O.B. Azusa, CA
May be seen under powr, call Rick @ 31.-487-3800
SPECIFIC INSURANCE REQUIREMENTS FOR RIGGERS IF A RIGGER/EQUIPMENT IS REQUIRED BELOW.
ALL RIGGERS MUST HAVE THE MINIMUM INSURANCE REQUIREMENTS BELOW:
COMMERCIAL GENERAL LIABILITY, EACH OCCURRENCE: $1,000,000
DAMAGE TO RENTED PROPERTY: $100,000
MED EXPENSE (ANY ONE PERSON): $5,000
PERSONAL AND ADV INJURY: $1,000,000
GENERAL AGGREGATE: $2,000,000
PRODUCTS-COMP/OP AGG: $2,000,000
AUTOMOBILE LIABILITY, COMBINED SINGLE LIMIT: $1,000,000
UMBRELLA LIABILITY, EXCESS LIABILITY, EACH OCCURRENCE: $5,000,000
WORKERS COMPENSASTION AND EMPLOYERS’ LIABILITY, EACH ACCIDENT: $1,000,000
RIGGERS LIABILITY: LIMIT $1,000,000/ DED $15,000
THE RIGGER MUST MAKE RAAR AUCTIONS USA LLC AS AN ADDITIONAL CERTIFICATE HOLDER MADE OUT TO THE FOLLOWING:
RAAR AUCTIONS USA LLC
30 N. GOULD STREET, SUITE 3253
SHERIDAN, WY 82801
AND MUST MAKE (XXXXX) AN ADDITIONAL CERTIFICATE HOLDER AS FOLLOWS:
AUCTION BUYER THAT HIRED RIGGER
NO RIGGER WILL BE ALLOWED INTO THE FACILITY UNLESS THE INSURANCE REQUIREMENTS ARE MADE AND CERTIFICATES ARE ISSUED AS REQUIRED.
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
Terms: Full payment in wire transfer or certified/cashier’s check.
15% Buyers Premium applies to all purchases made via the Internet.
IF PAYING BY WIRE TRANSFER, YOU MUST ADD $30.00 TO YOUR PAYMENT FOR OUR COST OF INCOMING WIRE FEES.
Bidder #______________________________ Drivers License #______________________
Bidder does hereby accept the “Terms of Sale” as evident by their signature below.
______________________________
Printed Name
______________________________ ________________________________
Signature Company (if any)
__________________________________
Street Address
______________________________ ______________________
City State
______________________________
E-mail address
______________________________ __________________________________
Phone Fax
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
PINES Hydraulic Rotary Bending Machine, Counter Clockwise Bend
Model 1
SN 11035-78421
Capacity:
Round tubing, mild steel 1 ½” x .188” wall
Schedule 80 steel 1” x .179” wall
Square tubing, mild steel 1 1/8” x .120” wall
Round bar, mild steel 1 1/8”
Square bar, mild steel ¾”
10” maximum radius
180 degree maximum bend angle + overbend for spring back
+/- ¼” bend angle accuracy
9’ 11” maximum recommended tube length
17 RPM bending arm speed
7.5 HP hydraulic unit motor set on 220/3/60VAC
1,000 PSI operating pressure
2527 ft lbs torque
41 gallons reservoir capacity
Dimensions:
144” x 48” x 35”H floor space required
2,750 lbs approximate weight
Machine includes auto indexing degree of bend turret, distance-between-bend stops, auto slide lube,
mandrel rod stops, free-standing control cabinet.
F.O.B. Azusa, CA
May be seen under powr, call Rick @ 31.-487-3800
General delivery information available from the auctioneer
SPECIFIC INSURANCE REQUIREMENTS FOR RIGGERS IF A RIGGER/EQUIPMENT IS REQUIRED BELOW.
ALL RIGGERS MUST HAVE THE MINIMUM INSURANCE REQUIREMENTS BELOW:
COMMERCIAL GENERAL LIABILITY, EACH OCCURRENCE: $1,000,000
DAMAGE TO RENTED PROPERTY: $100,000
MED EXPENSE (ANY ONE PERSON): $5,000
PERSONAL AND ADV INJURY: $1,000,000
GENERAL AGGREGATE: $2,000,000
PRODUCTS-COMP/OP AGG: $2,000,000
AUTOMOBILE LIABILITY, COMBINED SINGLE LIMIT: $1,000,000
UMBRELLA LIABILITY, EXCESS LIABILITY, EACH OCCURRENCE: $5,000,000
WORKERS COMPENSASTION AND EMPLOYERS’ LIABILITY, EACH ACCIDENT: $1,000,000
RIGGERS LIABILITY: LIMIT $1,000,000/ DED $15,000
THE RIGGER MUST MAKE RAAR AUCTIONS USA LLC AS AN ADDITIONAL CERTIFICATE HOLDER MADE OUT TO THE FOLLOWING:
RAAR AUCTIONS USA LLC
30 N. GOULD STREET, SUITE 3253
SHERIDAN, WY 82801
AND MUST MAKE (XXXXX) AN ADDITIONAL CERTIFICATE HOLDER AS FOLLOWS:
AUCTION BUYER THAT HIRED RIGGER
NO RIGGER WILL BE ALLOWED INTO THE FACILITY UNLESS THE INSURANCE REQUIREMENTS ARE MADE AND CERTIFICATES ARE ISSUED AS REQUIRED.
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
Terms: Full payment in wire transfer or certified/cashier’s check.
15% Buyers Premium applies to all purchases made via the Internet.
IF PAYING BY WIRE TRANSFER, YOU MUST ADD $30.00 TO YOUR PAYMENT FOR OUR COST OF INCOMING WIRE FEES.
Bidder #______________________________ Drivers License #______________________
Bidder does hereby accept the “Terms of Sale” as evident by their signature below.
______________________________
Printed Name
______________________________ ________________________________
Signature Company (if any)
__________________________________
Street Address
______________________________ ______________________
City State
______________________________
E-mail address
______________________________ __________________________________
Phone Fax