Roach smooth belt conveyor, 36" wide x 288" long, driven by 2 hp, 230/460 volt motor, serial# 472568-1.***Loading Fee $100.00***

Roach belt conveyor, 60" wide x 360" long, driven by 2 hp, 230/460 volt motor, serial# 472569.***Loading Fee $100.00***

cleated belt conveyor, 36" wide x 246" long, with gearbox less motor.***Loading Fee $150.00***

 28" wide x 19' long smooth belt conveyor, no motor ...[more]

 Hapman Pneumatic Loader, stainless steel construction with blower, mounted on approximately 55 cu. ft. stainless steel hopper, 4' X 4' X 3" strai...

Toyota hand truck with Battery Handling Systems (BHS) battery carrier, BHS model ATC-36 Mag, Toyota model# 6HBW20, serial# 20326, 4000# capacity, ...

Process Control Corporation material push/pull vacuum pump with associated controls.

weir style float / sink tank, carbon steel construction, approximately 7'6" wide x 13' long x approx 10' high, dual cone bottom hoppers on legs

Toyota hand truck with Battery Handling Systems (BHS) battery carrier, BHS model ATC-36 Mag, Toyota model# 6HBW20, serial# 19137, 4000# capacity, ...

34" diameter x 39' long drum dryer, carbon steel construction, with internal baffles, 8" discharge on bottom end, approximately 45" discharge heig...

10 hp Conair blower system, model CR2000, indoor use, in enclosure, 480 volt, in cabinet, with controls, serial #64354

 2.5" Diverter Valve, carbon steel construction, with hydraulic pump.

cyclone dust collector, carbon steel construction, approximately 36" diameter x 20" straight side x 42" cone bottom, 8" inlet, 6" outlet. ...[mor...

Novatech hopper dryer system, model POD-250-B, rated 250 CFM, with blower, controls, 230 volt, with ten (10) Novatech hopper receivers model PEE-W...

Roach cleated belt conveyor, 36" wide x 288" long, with gearbox less motor, serial# 469948-2.***Loading Fee $200.00***

Yale hand truck with Battery Handling Systems (BHS) battery carrier, Yale model MPW060LEN2412748, serial# A897N02853B, vacuum securing mechanism w...

NPK vacuum system, type HITB-06E 220/R6 HL, carbon steel construction, with 10 hp, 230 volt blower, rated 6 cu meter/minute, 2200 MMAQ with receiv...

 Herbold Granulator, Model SMS45/80, 18" x 30" grinding chamber, 150 H.P. drive motor, 460 volts, 5 knife rotor, 3 bed knives, additional flywheel...

conveyor, approxmately 36" wide x 252" long smooth belt, with 2 hp, 208-230/460 volt drive.

18.5 kw Onan genset, model 20.Oes-1sr/156203, standby, 60 hertz, 1800 rpm, 18.5 kw, 23 kva, 3 phase, 13.5 kw, 6.7 kva, single phase, 120/208 volt ...

Model S45 Foremost Granulator, 16" x 45" feed opening, 3 knife closed rotor, 2 bed knives, feed hopper with dual 50 H.P. 230/460 volt motors, with...

Falcon Mark I hydraulic power pack, 10 230 volt or 7.5 hp 460 volt motor, with manifold, 41" wide x 72" long x 30" high reservoir. ...[more]

24" W x 19' L Belt Conveyor

Belt conveyor, 11" Wide x 152" long belt, with 3/4 HP Electric Drive, 220V.***Loading Fee $150.00*** ...[more]

 Mitts and Merril hog mill, model 15 CSE , rear discharge, 20" x 27" feed opening, 30" diameter rotor with 150 hp, 460 volt direct coupled motor, ...

(5) Pallets of starter and control panels ...[more]

Used Metro floor scale, 28" x 28", on wheels. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide. (Belt not part of Lot) ...[more]

Used Battery Handling Systems battery charging storage rack, model BS-30-2-LE, 64" long x 40" wide. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide, damaged rollers. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide, with 24 volt charger. ...[more]

Used Battery Charging Storage Rack, model B533-2X, 76" long x 40" wide, with (2) 36 volt chargers. ...[more]

Used 42" x 42" bin hopper, carbon steel construction, 20" straight side, cone bottom. ...[more]

Process Control Corporation material push/pull vacuum pump with associated controls.

211 cu ft Surge bin, carbon steel construction, approximately 72" diameter x 79" straight side x 32" deep cone bottom, flat top with 30", (3)6", 2...

196 cu ft Surge bin, carbon steel construction, approximately 66" diameter x 69" straight side x 92" deep cone bottom, flat top with 30", (2)2", (...

FIX Peter Steimel GmBH super sack/gaylord loading station, type BIG-BAG/OKTABINBEFULLSTATION, designed to handle both super sack bags on skids and...

Cumberland Granulator, 14" x 16" feed opening, 3 knife open rotor, 2 bed knives, Gaylord High Discharge, with feed hopper, 20 H.P. 230/460 volt.**...

3.5" Sterling Extruder, 30:1 L/D, electrically heated, water cooled, jacketed feed section, vented barrel, 150 HP DC motor with SCR controller, 11...

Motan Diagnostic dryer, model MDD400, 21.6 KW total heater load, 8 hp total motor, 480 volt, wit (3) insulated hoppers with top mounted receivers,...

1/4" Randcastle Microtruder, 7" barrel, 28:1 l/d, electrically heated, (3) zone with (1) die zone, driven by 1/2 hp DC motor, with controls.

Una-Dyn hopper dryer system, model DHD-60, with heater and 10hp blower, controls on skid, with two (2) receivers, 460 volt, 3 phase, serial# DHD-6...

SSI 400 HP model 5000 HD twin shaft shredder, with (2) 200 HP, 460 Volt hydraulic power units, hydraulic ram with power unit.***Loading Fee $900.0...

 50" W x 30' L Inclined Belt Conveyor***Loading Fee $100.00*** ...[more]

Novatech hopper dryer, model PIII-400, with 2 hp blower and controls on frame, 460 volt, 3 phase, with carbon steel hopper, serial# 3-2609-0074

Roach belt conveyor, approxmately 36" wide x 288" long smooth belt, with approximately 2 hp drive, serial# 469948-4.

7.5 kW IMS water boiler, model WS-75D WATERSTAR, 250 F heating capacity, with 1 hp Goulds pump, size 1 1/4 x 1 1/2-6, 230 volts, 3 phase, serial# ...

28" x 14' Z style metal cleated belt conveyor, approx. 28" wide x 8' long flat section x 3' inclined section x 3' flat section, approx. 40" discha...

Roach belt conveyor, approxmately 36" wide x 244" long smooth belt, 2 hp, 230/460 volt drive, serial# 469948-3.***Loading Fee $100.00*** ...[more]

Air Conveyor Corp. paper shredding system with feed hopper, slot conveyor, 24" x 36" single rotor shredder driven by 30 hp motor, air separator wi...

Davis-Standard Extruder, 3.5", 32:1 L/D, electrically heated, air cooled with blowers, Model 350SAD7767, 106 H.P. gear box rating with 1.5 service...

Century II AZ-15 Shredder, approximately 12.5" wide x 27.5" long chamber, 20 hp, 230/460 volt, on stand with feed hopper, serial# 130 8536, built ...

2.5" Davis Sterling extruder, 30:1 L/D, electrically heated, air cooled, 5 barrel zones, 50 HP DC motor with SCR, with Una-Dyn hopper dryer/ loade...