Refine your search
Category
- Warehouse Equipment (55)
- Other industrial Supplies (39)
- Extrusion (29)
- Compounding & Pelletizing (20)
- Loaders (15)
- Processing (11)
- Processing Equipment (10)
- Pipes & Fittings (9)
- Support Equipment (8)
- Machines (6)
- Heavy Duty Trucks (5)
- Networking & Communications (4)
- Packing & Weighing (4)
- Saws (4)
- Seeding & Tillage (4)
- Auto Parts & Salvage (3)
- Machine Tools & Tools (3)
- Mixers & Blenders (3)
- Post Processing Machines (3)
- Audio Visual Equipment (2)
- Grain Handling (2)
- Injection Molding (2)
- Laboratory Supplies (2)
- Pre-Press Equipment (2)
- Recycling Equipment (2)
- Transportation (2)
- Wires, Cables & Connectors (2)
- Analytical Instruments (1)
- Complete Plants (1)
- Crushing & Conveying (1)
- Fitness Equipment (1)
- Measuring & Testing Equipment (1)
- Refrigeration (1)
- Surface Equipment (1)
- Tanks & Vessels (1)
- Thermoforming (1)
- Warewashing (1)
Filtered by:
- Item Type
- List
- Grid
-
261 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Process Control gravametric blender / feeder, model EB477BF004, carbon steel construction, 4 material with loaders and receivers, 115 volts, seri...
Una-Dyn hopper dryer system, model DHD-60, with heater and 10hp blower, controls on skid, with two (2) receivers, 460 volt, 3 phase, serial# DHD-6...
1/2 HP Killion Pelletizer
Killion pelletizer, model 5888, 2" wide rotor with approximately (20) diagonal teeth, driven by 1/2 hp motor, 180 volt, with bronco controls, seri...
Puhl V-CAD 5 air separation / classifier system with approx 25' H bucket elevator with 15" W plastic bucket, air flow dampening separation technol...
2" Deltaplast cold feed extruder, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed section, pedestal mounted with power roll strip ...
SSI 5000HD Shredder 400 HP
SSI 400 HP model 5000 HD twin shaft shredder, with (2) 200 HP, 460 Volt hydraulic power units, hydraulic ram with power unit.***Loading Fee $900.0...
3" SUSSEX CROSS HEAD DIE
3" Sussex Cross Head Die, 3 material design.
Process Control gravametric blender / feeder, model XBLHGGXX, carbon steel construction, 4 material with loaders and receivers, 120 volt, serial# ...
Una Dyn Hopper Dryer with Heater and Blower, 200# hopper with receiver.
80mm Leistritz twin screw extruder, 80mm parallel screws, counter rotating, 25:1 L/D, electrically heated, air cooled, jacketed feed section, vent...
50" W x 30' L Inclined Belt Conveyor***Loading Fee $100.00*** ...[more]
300 HP CONDUX GRANULATOR
Condux granulator Model CS 800 / 2000 lll A, 800 mm x 2000 mm rotor, (12) knife open rotor, scissor cut, belt driven with 300 hp, 1190 RPM, 460 vo...
Una-Dyn vacuum loader, model #3, consisting of (1) Roots rotary lobe blower, designation 36 AF, driven by a 3 hp, motor, silencer included, mounte...
NOVATECH DRYER, MODEL PIII-400
Novatech hopper dryer, model PIII-400, with 2 hp blower and controls on frame, 460 volt, 3 phase, with carbon steel hopper, serial# 3-2609-0074
100 ton Newberry injection molder, model H6-100MT, 14" x 17" tie bar spacing, hydraulically driven extruder, 20 hp on board pump, 460 volt, serial...
48" WINDER
winder, for 48" long rolls, driven by 0.5 DC motor, with controls and SCR on frame, with extra spindle.***Loading Fee $100.00*** ...[more]
36" X 288" Roach Conveyor
Roach belt conveyor, approxmately 36" wide x 288" long smooth belt, with approximately 2 hp drive, serial# 469948-4.
Lloyd Instruments twin column material tester, type 6000R, with grippers and 30Kn, (2)10Kn, (2)2500N, 100N, load cells, computer controls, serial#...
Rotex screener, model 764, carbon steel construction, 60" wide x 120" long screen area, 2 deck design, aluminum cover, on base with hp, volt motor...
Ball & Jewell shredder granulator unit, with model SB-15/515-A-11X dual shaft shredder, approximately 24" x 24" chamber, with 15 hp motor, serial#...
6" Beringer Hydraulic Screen Changer, slide gate style, dual breaker plates, on base with hydraulic power pack.***Loading Fee $200.00*** ...[mor...
6" CUMBERLAND PELLETIZER, 3 HP
6" Cumberland Pelletizer, power roll feed, 3 H.P. 575 volt variable speed drive, on base, Serial# 226425-772.***Loading Fee $100.00*** ...[more]
KM MUTSCHINK SPIN DRYER, S/S
KM Mutschink spin dryer, stainless steel construction, top mounted 3 kw, 480 volt motor.***Loading Fee $100.00*** ...[more]
7.5 kW IMS water boiler, model WS-75D WATERSTAR, 250 F heating capacity, with 1 hp Goulds pump, size 1 1/4 x 1 1/2-6, 230 volts, 3 phase, serial# ...
Carver Laboratory press, model 2697, 12 ton capacity, 12" x 12" independently heated platens with controls, , maximum 10" opening, 5.2 kW heating ...
102" WIDE EMBOSSING STAND
102" Embossing stand, 16" diameter x 102" wide chormed embossing roll, cored with rotary unit, 16" diameter x 102" long rubber bottom roll with st...
28" x 14' Z style metal cleated belt conveyor, approx. 28" wide x 8' long flat section x 3' inclined section x 3' flat section, approx. 40" discha...
12" TRAVELING SAW
12" traveling up-acting saw, 1/2 hp, with clamp, measured 15" of travel
2.5" HPM Extruder, 24:1 L/D, electrically heated, air cooled, 30 HP dc motor with scr controller, control panel with 3 barrel and 1 die zone, top ...
Process Control gravametric blender / feeder, model EB477BF004, carbon steel construction, 4 material with loaders and receivers, 115 volt, serial...
Process Control gravametric blender / feeder, model EB477BF004, carbon steel construction, 4 material with loaders and receivers, 115 volt, serial...
Davis-Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barrel...
92 mm Maris pelletizing line consisting of the following, One (1) 92 mm Maris twin screw co rotating extruder, type TM92M, 30:1 l/d, electrically ...
Satake optical sorter, type Scan Master II, model SMII-8401EP, 8 lanes with camera's, stainless steel feed hopper with vibrating feeders, model 3...
10" diameter tubular screw conveyor, galvanized construction, approximately 10" diameter x 12' long, chain drive with approximately 2 hp motor dr...
Cumberland Granulator, Model 24, 14" x 24" feed opening, 3 knife open rotor, 2 bed knives, feed hopper presently equipped with 50 H.P. 440 volt X...
Cincinnati Milacron PVC compouding line consisting of the following, One (1) Dosing feeder with variable speed control, One (1) Cincinnati Milacro...
8" diameter Egan Extruder model 8035 D-H, 32:1 L/D ratio, vented barrel, electrically heated, water cooled, 11.73:1 gearbox ratio, 600 HP DC driv...
Process Control gravametric blender / feeder, carbon steel construction, 4 material with loaders and receivers, 115 V***Loading Fee $100.00*** .....
Welding Engineers model HT 0.8 counter rotating twin screw extruder, 500 rpm, 10 HP, serial# 2741, year 1993.***Loading Fee $250.00*** ...[more]
36" X 288" Roach Conveyor
Roach belt conveyor, approxmately 36" wide x 244" long smooth belt, 2 hp, 230/460 volt drive, serial# 469948-3.***Loading Fee $100.00*** ...[more]
30" Midwestern Industries screener, model ME3006-6, carbon steel construction, single deck, on base with 1 hp, 230/460 volt motor drive, serial# 0...
4.5" EGAN CRAMMER FEEDER, S/S
4.5" Egan Crammer Feeder, stainless steel construction, 43" diameter x 18" straight side x 33" cone bottom, 4.5" bottom outlet, bolt on top with 8...
Cumberland model 62B granulator, 2 bed knives, three knife open rotor, 200 HP 1185 RPM motor, with hopper, serial# 86000-731.***Loading Fee $400.0...
Process Control gravametric blender / feeder, model XBLHGGXX, carbon steel construction, 4 material with loaders and receivers, 120 volt, serial# ...
AEC Loader, single material with 48 cu. ft. hopper, carbon steel hopper and AEC AF-1 Additive Feeder with motor and bunting magnet.
66" DAVIS-STANDARD SHEET STACK
Davis-Standard sheet stack with 66" wide x 18" diameter three roll vertical stack, cored rolls with rotary unions, 2 hp dc drive motor, pneumatica...
6" GEC BLOWN FILM DIE
GEC blown film die, 6" diamter, rotating capability with 1/6 hp, 230/460 volt motor drive, heater bands, air ring on cart.***Loading Fee $100.00*...
Air Conveyor Corp. paper shredding system with feed hopper, slot conveyor, 24" x 36" single rotor shredder driven by 30 hp motor, air separator wi...
Cumberland granulator, model 37, approximately 18" x 37" feed opening, 3 knife open rotor, with feed hopper, belt driven with 75 hp motor.***Loadi...
120 MM OMV / Cincinnati Milacron single screw extruder, model EXD-120, approximately 34:1 L/D, electrically heated, water cooled barrel, jacketed ...
Process Control gravametric blender / feeder, model EB477BF004, carbon steel construction, 4 material with loaders and receivers, 115 volt, serial...
Cumberland granulator, model 20, approximately 20" wide feed opening, 5 knife closed rotor, direct coupled 100 hp, 1180 rpm, 220/440 volt motor o...
6" BERLYN HYDRAULIC SCREEN CHANGER***Loading Fee $100.00*** ...[more]
Davis-Standard Extruder, 3.5", 32:1 L/D, electrically heated, air cooled with blowers, Model 350SAD7767, 106 H.P. gear box rating with 1.5 service...
6" Sterling extruder, 32:1 L/D, electrically heated, water cooled barrel with circulation system, jacketed feed section, 68" center line height, 4...
Sterling extruder, 3.5" diameter screw, 30:1 L/D, 100 HP motor, 13.95:1 gearbox ratio, Sterling serial# 35906 with Kreyenborg hydraulic screen cha...
Davis-Standard Mark V extruder, model 3.5 MV350, 100mm diameter 26:1 barrel, no screw, electrically heated, air cooled, five barrel zones, four d...
Process Control gravametric blender / feeder, carbon steel construction, 4 material with loaders and receivers, 115 V***Loading Fee $100.00*** ....
75 MM Davis-Standard Extruder, electrically heated, water cooled, 30:1 L/D, vented barrel, 17.26:1 gearbox ratio, 100 H.P. DC Motor, skid mounted...
Loading...-
261 item(s)/page