Refine your search
Filtered by:
- Category
- List
- Grid
-
135 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
C.E. Bauer Disc Grinder/Refiner, Model 400, size 36", Serial Number 41188-C, 1800 RPM/250HP/575V/3ph Drive
Stainless Steel Germclino, 25HP (approx) motor, with Hydraulic pump
Dedert Corp. Double Effect Steep water Evaporator, 316 Stainless Steel, rated 149 PSI and Full Vacuum with Heat Exchanger and Columns. This evapo...
Stainless Steel Screw Conveyor, approx 12" x 25' long, 5HP/575v/3phase motor with rotary air lock
Stainless Steel Screw Conveyor, 15" x 118" (approx) with 5HP/575v/3ph motor and rotary air lock
Stainless Steel Screw Conveyor, approx 20' x 12" with a 10 ft drop section
Komeline Sanderson Rotary Vacuum Filter, Stainless Steel, 10ft diameter x 216" wide drum. 3HP/575v belt drive. Job #I1482, Serial Number BDF12.34....
Baltimore Air Coil Cooling Tower, Model VT1-600-PPCX, Serial Number 96800170 Belt #B142 Nominal Tonnage = 600 Motor HP (2) 40HP Airflow CFM 131,25...
Baltimore Air Coil Cooling Tower, Model VT1-600-PPCX, Serial Number 96800171 Belt #B142 Nominal Tonnage = 600 Motor HP (2) 40HP Airflow CFM 131,25...
Schutte Hammer Mill -100HP
Schutte Hammer Mill, Type P, Model 1080, 100HP/575v/3phase electric motor Schutte Buffalo website ...[more]
(2) Dust Collectors
Lot of (2) Dust Collectors. One is MicroPulsaire, both carbon steel construction
(2) U Kam Thermal Equipment U-Tube Heat Exchangers, 52" long x 7" diameter (approx) #1: National Board Number 5855, / CRN 011140755 shell 150 PSI...
100 HP Alfa Laval Centrifugal Seperator, Type TX-412S-31H-60, Mfg # 2872715. Max speed 4500 to 4750 RPM, Stainless Steel Contacts. 575v/3ph/60Hz. ...
Dorr-Oliver (Merco) Centrifuge, Serial Number 91784-1, Max Bowl Speed 2550 RPM w/Feed of SP.GR. 1.2 575v/3ph/125HP Model C-30 Merco Centrifuge ...
Lot Includes (1) APV Heat Exchanger Model TR-15, Serial Number 28649 and (2) Durco Pumps 3&5 HP respectively with associated piping and sensors wi...
150 Gallon (approx) Stainless Steel Tank, 48" straight side x 30" Diameter. Comes with (1) Durco Pump, D4 Alloy, 15HP/3515RPM/ 575v/3phase.Lot inc...
Ketema Condenser Size 730 MS
(1) Ketema Condenser size 730 MS, Serial Number CO76626. Spray inlet 200 GPM@5PSIG Vacuum 20 In. HG Vapor Load 5055PPH Max.
Scrubber System includes 2 Plastic Packed Columns and 3HP/575v drive
New York blower, carbon steel, size 12GFE. ...[more]
APV plate heat heat exchanger, model SR6GL-M-10, (33) aluminum plates rated 50 psi @ 240 degrees F, serial# 20073003000163, built 2007. National ...
Alfa Laval plate heat exchanger, model M15-BFG, (168) aluminum plates rated 150 psi @ 300 degrees F, 1115 sq. ft. surface area, Sq Ft Capacity 66....
SUMMIT Centrifugal Pump, WCB J600 number 612894 with a 30HP 575v pump. Brochure ...[more]
Mueller Heat Exchanger Model AT20 F-20, Serial Number 364364, NB # 43239, Max WP 145 PSI@199°F, CRN DI842.6, 90 plates. Pack Lengths (inches) : Se...
Dean Pump 30 HP 3500 RPM
30 HP Dean Pump, model 2x3x10, PS2141, Serial Number 1828.77, 275 max PSIG@100°F, 3500 RPM/575v/3ph
Durco centrifugal pump,, carbon steel, with 125 hp 575 volt motor, serial# 1006-1041. Size 3K 10 x 8 - 14RV/12.81 MDP 285 PSI @ 100F Material CD4M...
Durco centrifugal pump, model 3K10X8, carbon steel, with 125 hp 575 volt motor.
Condensation System Includes Receiver and (2) Grundfoss Recirculation Pumps. Model CR32 51" Diameter x 91" straight side, Horizontal carbon steel ...
1000 Gallon (approx) Stainless Steel Tank, with structure. Lot includes heat exchanger approximatly 10' x 1'. And Durco 3HP Pump
Entoletor Impact Mill Series 30
Entolator Centrifugal Impact Mill, Series 30, serial number 7598, carbon steel construction. Disassembled as pictured. ...[more]
APV Plate & Frame Heat Excahnger
APV Plate and Frame Heat Exchanger
Blower Engineering Vacuum Pump, Model Tri-Lobe TL70 with Silcencer 40HP/575v/3phase.
Stainless steel circular mixer, 96" diameter x 74" straight side, 25 hp 575 volt motor, with outfeed screw conveyor.
Vetter tube bundle dryer, model 56-300-5.42, gas fired, with 30 hp 575 volt vacuum blower, screw feed with (2) sections of infeed screw conveyors,...
Vetter Kassel-B glutten dryer system. Includes approx. 9' diameter x 25' long tube bundle dryer, carbon steel circulation pumps, (2) plate heat ex...
APV plate heat exchanger, aluminum plates, type HMBL, serial# 638.
Lot of 3 stainless steel screw conveyors, 18" Diameter , (1) 12' long, (1) 19' long and (1) 8' long.
75HP Goulds Centrifugal Pump
75 HP Goulds Centrifugal Pump, 575v 3phase
125HP Goulds Centrifugal Pump
Goulds 125 HP Centrifugal Pump, with a 575V 3 phase motor.
750 CFM Quincy rotary screw air compressor, model QSI 1000, 200 hp, 575 volt, serial# 98258H. Link to Quincy Compressors Data Sheets ...[more]
650 CFM CompAir rotary screw compressor, model 6150AL, 150 hp. 575 volt, serial# L020-1164.
Hakison Air Dryer Model DH2100
Hakison air dryer/dehumidifier, model DH 2100, serial# 344-1-9102-15.
Lot of (6) Strong Co. stainless steel screw conveyors, 18" wide, (1) 15' long, (2) 20' long, (1) 35' long and (1) 12' long.
Atlas Copco Shielded Air Compressor, Type LR3-C, Serial Number ARP482044. 200 HP, 575v/3phase Equipped with MD300W Air Dryer, Built in 2003. Damag...
Atlas Copco Shielded Air Compressor, Type 2R145, Serial Number ALF.080592, Built in 2003, Oil Free, Elektronikon Control, Equipped with MD300 Air ...
Blower Engineering Tri-Lobe TL-70 Blower serial number 117025644 driven by a Leeson Wattsaver 25 HP Electric Motor.
One Lot of (10) Used Durco Pumps 6"x8" Type PE2YA-10, each equipped with a 10 HP / 575v dirve. Possible 316 S.S.
Used Siemens 200 HP Electric Motor, 575v/3ph/ 1785 RPM 194 amps. 505U Frame
(Unused) 40 HP Tatung Electric Super-Max Premium High Efficiency 3Phase Induction Motor 3ph/60hz/575v , Continuous Duty Rating, Frame 364T
Used 250 HP Hawker Electric Motor, 1775 RPM, Frame Size V450D, 3ph/60Hz/575V, Serial Number 6725524-99D
30 HP Electric Motor - 3550 RPM - Framze Size 286TS - Unused In Box
Unused in Box, Tatung 10 HP lectric Motor, TEFC Enclsoure 3ph/60Hz/575Volts. Frame 215T, 1800 RPM
Used 200 HP Westinghouse Electric Motor, 550v/3ph/60Hz, serial number 166F44787, 1780 RPM
Un-Used 10HP Baldor Electric Motor, 870 RPM, Frame 284TC, 575v/60hz/3phase. Serial Number C0311170002
Used 20HP Brook Compton Electric Motor, Frame Size F286T, 1165 RPM, 575v/3ph/60hz.
Used 20 HP General Electric Motor - Frame Size 256T - RPM: 1750 575v/3ph/60hz
Used 15 HP GEC Alsthom Cimpak Electric Motor - 3490 RPM - Frame 254T - 575V/3ph/60hz ...[more]
Used 10 HP Canada General Electric Corp Electric Motor, 1760 RPM, Frame 256U, 3ph/60Hz/160 RPM Frame 256U ...[more]
-
135 item(s)/page