Lot

5A

Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use)

In MRA IND. 40 HIGH END CNC, Okuma LU3000EX (4) 2...

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 312-280-1234 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/12
Bidding has ended
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use)
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 1 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 2 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 3 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 4 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 5 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 6 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 7 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 8 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 9 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 10 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 11 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use)
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 1 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 2 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 3 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 4 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 5 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 6 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 7 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 8 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 9 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 10 of 11
Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use) - Image 11 of 11
Auctioneer has chosen not to publish the price of this lot
Chesterfield, Michigan
6.00%
18.00%

Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use)

KFS Series Features

All KFS gear tool sharpening machines feature the following:

  • Compact Fanuc CNC panel with touch-screen color display that swivels flat into the body of the machine safely out of the way when not in use
  • Easy-to-use software with conversational programming
  • High-speed direct drive grinding spindle
  • Pre-loaded linear guide ways
  • AC servo motors with pre-loaded ball screws for linear axes
  • Sharpen to AGMA “AAA” quality
  • Suitable for either high-speed steel or carbide tools
  • Designed for using vitrified, CBN or diamond abrasive (resin-bonded or plated)
  • High-volume coolant flow for wet grinding
  • Integrated centrifuge filtration system for reduced footprint and shop floor cleanliness
  • Clarity of the filtration system is rated at 2 to 5 microns
  • Integrated crane on KFS250S and KFS250SS for easy loading and unloading of larger hobs

 

 

 

  • Fanuc CNC control of all four axes eliminates manual setup and maximizes accuracy and repeatability with an operator-friendly prompting program as well as CNC storage of cutter data
  • Sharpens hobs to AGMA (American Gear Manufacturers Association) class “AAA” quality
  • Pneumatic tailstock provides positive clamping pressure while grinding
  • Designed for hobs up to 4″ in diameter, 8″ of face with a maximum 5 DP
  • Capable of grinding high-speed steel (HSS) and carbide tools using CBN or diamond abrasive
  • Operators will appreciate the ergonomic considerations and accessibility of the machine spindles for easy setup
  • Plant engineering will notice the one-piece compact machine design with easy access to all machine systems for maintenance
  • KFS100 is a straight-gash hob sharpening machine, the KFS100S provides the capacity for spiral-gash hobs, and the KFS100SS adds the ability to sharpen spur and helical shaper cutters

Model KFS100 Series Technical Data

Model KFS100.5 Series Technical Data

mm

Inch

Maximum module / diametral pitch

5.0

5

Number of gashes

1-99

Maximum cutter diameter

101.6

4.000

Maximum cutter length

203.2

8.000

Maximum grinding travel

320

12.598

Maximum radial travel

190

7.480

Maximum tangential travel

100

3.937

Center distance, cutter to grinding spindle
   minimum
   maximum


50
240


1.969
9.449

 

 

Item 110

 

 

 

 

 

 

 

 

 

 

Item 120

 

 

 

 

 

Item 910

 

 

 

 

Item 915

 

 

Item 920

 

Optional helical gash hob sharpening capability with custom CNC hardware and software for electronic generation of the gash lead. This feature includes a heavy-duty swivel plate with precision planetary drive system for CNC swivel

angle setting. The spindle swivel angle, "B" axis, is positioned by  Fanuc  servo motor to the required gash and dressing angle. Automatic crown dressing cycle for vitrified wheels based upon data generated by an  external PC program  is  included  to provide correct rake for helical gash hobs. Requires Item 920.

... ... .. . ..... . ... .... .. .. . .. . .. . ... ... ... ... ... .. . ... ........... .. ... . ... . ...... .. ..... $  24,900

 

Note: For extreme spiral gash tools an engineering study will

be required to confirm correct grinding spindle swivel angle.

 

 

 

Solid state memory card for permanent storage of machine system files. This is recommended to prevent loss of machine data in the event of backup battery failure and/or CNC CPU malfunctions.

. .. .. .... ... ... ..... .... .. ... ... ... ... ... ...... ... .. . ... .. ... . ... ...... ... ..... . ... .. ..  $                      250

 

Power monitor with "Y" axis safety retract based upon preset

grinding spindle power level... ..... . ...... ..... ............. .... ..... .... ...   $       1,125

 

CNC controlled semi-automatic and in process truing cycles using aluminum oxide wheel for dressing of layered CBN grinding wheels.

......... . .. .. . ... .. . .. . ... ... ... ... .. . .. . ... ... ... ... ... ... ... ... ... ............... ...  $                          7,500

 

 

Fixtures and Grinding Arbors

 


Item 1000

 

 

 

Item 1010

 

 

 

Item 3000

 

Solid tapered arbors for cutters with bores of 8mm or 10mm . Indicate bore diameter and length of cutter to be sharpened.

... .... .. ..... . ... ... ...... .. . ...... ... .... .... . .... .... . ... .... ... .. . ..... ..... .... .. . $    1,350

 
   

Grinding equipment package including two (2) dog drivers for arbors grinding wheel adapters , one (1) CBN and (1) diamond grinding wheel dressing wheel and equipment .... .. ... .. .. .. .. .. .. .. .. ...... .. ..... ... .. ...  $                                                                                                                4,740

 

Auctioneer:

Premier Asset Recovery Group

Koepfer KFS-100.5 CNC Hobb Sharpening Grinder, New 2019, S/N (approx. 100 Hours use)

KFS Series Features

All KFS gear tool sharpening machines feature the following:

  • Compact Fanuc CNC panel with touch-screen color display that swivels flat into the body of the machine safely out of the way when not in use
  • Easy-to-use software with conversational programming
  • High-speed direct drive grinding spindle
  • Pre-loaded linear guide ways
  • AC servo motors with pre-loaded ball screws for linear axes
  • Sharpen to AGMA “AAA” quality
  • Suitable for either high-speed steel or carbide tools
  • Designed for using vitrified, CBN or diamond abrasive (resin-bonded or plated)
  • High-volume coolant flow for wet grinding
  • Integrated centrifuge filtration system for reduced footprint and shop floor cleanliness
  • Clarity of the filtration system is rated at 2 to 5 microns
  • Integrated crane on KFS250S and KFS250SS for easy loading and unloading of larger hobs

 

 

 

  • Fanuc CNC control of all four axes eliminates manual setup and maximizes accuracy and repeatability with an operator-friendly prompting program as well as CNC storage of cutter data
  • Sharpens hobs to AGMA (American Gear Manufacturers Association) class “AAA” quality
  • Pneumatic tailstock provides positive clamping pressure while grinding
  • Designed for hobs up to 4″ in diameter, 8″ of face with a maximum 5 DP
  • Capable of grinding high-speed steel (HSS) and carbide tools using CBN or diamond abrasive
  • Operators will appreciate the ergonomic considerations and accessibility of the machine spindles for easy setup
  • Plant engineering will notice the one-piece compact machine design with easy access to all machine systems for maintenance
  • KFS100 is a straight-gash hob sharpening machine, the KFS100S provides the capacity for spiral-gash hobs, and the KFS100SS adds the ability to sharpen spur and helical shaper cutters

Model KFS100 Series Technical Data

Model KFS100.5 Series Technical Data

mm

Inch

Maximum module / diametral pitch

5.0

5

Number of gashes

1-99

Maximum cutter diameter

101.6

4.000

Maximum cutter length

203.2

8.000

Maximum grinding travel

320

12.598

Maximum radial travel

190

7.480

Maximum tangential travel

100

3.937

Center distance, cutter to grinding spindle
   minimum
   maximum


50
240


1.969
9.449

 

 

Item 110

 

 

 

 

 

 

 

 

 

 

Item 120

 

 

 

 

 

Item 910

 

 

 

 

Item 915

 

 

Item 920

 

Optional helical gash hob sharpening capability with custom CNC hardware and software for electronic generation of the gash lead. This feature includes a heavy-duty swivel plate with precision planetary drive system for CNC swivel

angle setting. The spindle swivel angle, "B" axis, is positioned by  Fanuc  servo motor to the required gash and dressing angle. Automatic crown dressing cycle for vitrified wheels based upon data generated by an  external PC program  is  included  to provide correct rake for helical gash hobs. Requires Item 920.

... ... .. . ..... . ... .... .. .. . .. . .. . ... ... ... ... ... .. . ... ........... .. ... . ... . ...... .. ..... $  24,900

 

Note: For extreme spiral gash tools an engineering study will

be required to confirm correct grinding spindle swivel angle.

 

 

 

Solid state memory card for permanent storage of machine system files. This is recommended to prevent loss of machine data in the event of backup battery failure and/or CNC CPU malfunctions.

. .. .. .... ... ... ..... .... .. ... ... ... ... ... ...... ... .. . ... .. ... . ... ...... ... ..... . ... .. ..  $                      250

 

Power monitor with "Y" axis safety retract based upon preset

grinding spindle power level... ..... . ...... ..... ............. .... ..... .... ...   $       1,125

 

CNC controlled semi-automatic and in process truing cycles using aluminum oxide wheel for dressing of layered CBN grinding wheels.

......... . .. .. . ... .. . .. . ... ... ... ... .. . .. . ... ... ... ... ... ... ... ... ... ............... ...  $                          7,500

 

 

Fixtures and Grinding Arbors

 


Item 1000

 

 

 

Item 1010

 

 

 

Item 3000

 

Solid tapered arbors for cutters with bores of 8mm or 10mm . Indicate bore diameter and length of cutter to be sharpened.

... .... .. ..... . ... ... ...... .. . ...... ... .... .... . .... .... . ... .... ... .. . ..... ..... .... .. . $    1,350

 
   

Grinding equipment package including two (2) dog drivers for arbors grinding wheel adapters , one (1) CBN and (1) diamond grinding wheel dressing wheel and equipment .... .. ... .. .. .. .. .. .. .. .. ...... .. ..... ... .. ...  $                                                                                                                4,740

 

MRA IND. 40 HIGH END CNC, Okuma LU3000EX (4) 2015, Mazak Multiplex 6200Y & 6300Y (4), Mazak Dual Turn 20 2018 (6), Nexus 200 (6) SPLINE ROLLERS

Ends from
Venue Address
44785 Macomb Industrial Drive
Clinton Twp
Michigan
48036
United States

We are making things easier for you, auction specific shipping information coming soon. For now, please visit the Important Information / Terms & Conditions tab [next tab to the right] for auction specific removal dates, preferred vendors and more.

For general shipping information from the auctioneer please see below:

For Premier Asset Recovery Group delivery information please telephone 312-280-1234.

Important Information


Online Only Auction

MRA Ind.

40 HIGH END CNC MACHINES, Okuma LU3000EX (4) 2015, Mazak Multiplex 6200Y & 6300Y (4), Mazak Dual Turn 20 2018 (6), Mazak Nexus 200 (6)  Mazak Dual Turn 25,  Leibherr LC80 CNC Gear Hobber, 153 Liebherr, Eitel 40 ton Straightener, 3 Haas VF-1 4 Axis Machining Centers, Zeiss Contura CMM, Forklifts, more  

Auction Date & Time:

Bidding Opens: Tuesday, February  11, 2020 at 9:00 AM

Online Bidding Closes: Wednesday, February 19th 2020 at 11:00 AM (CST)

 Location: 44785 Macomb Industrial Drive, Clinton Township, Michigan

INSPECTION: 

Tuesday, February 18, 2020 from 8:00 Am to 4:00 PM

 

18% Buyers Premium applies on all online purchases.

 

=========================================

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

 

Terms and Conditions

 1.  IDENTIFICATION: All Participants are required to register prior to becoming an Approved Bidder.  All Participants are required to give full name, permanent street address, phone numbers, email address, valid credit card and business name.   Subsequent to registration on BidSpotter, approval to bid is at our discretion.

 

2. PAYMENT: Invoices must be paid in full by  Friday, February 21, 2020.   Payment may be made by wire transfer, company check with a bank letter of guarantee, certified funds or cash.  A BUYERS FEE OF 18% WILL BE APPLIED TO INVOICE IN ADDITION TO THE SALES PRICE.    Where required by law, ANY APPLICABLE SALES TAX WILL BE APPLIED TO ALL SALES UNLESS BUYER HAS A PROPER EXEMTION.  NO MERCHANDISE WILL BE RELEASED UNITIL INVOICE IS PAID IN FULL.

3. Purchase of any lot is at the Purchaser's risk with risk of loss immediately passing to Purchaser upon the auctioneer's call. Neither Premier Asset Recovery Group, LLC, nor its consignors, have any liability of any nature whatsoever to Purchaser if the lot is not delivered to Purchaser due to fire, theft, damage, or any other cause.

4. REMOVAL:  All purchases MUST be removed as herein listed.  Small items (Tooling, Machine Parts & Accessories, etc.) are to be REMOVED WITHIN 2 DAYS OF THE AUCTION.  WE ASSUME NO RESPONSIBILITY FOR SMALL, CARRIABLE ITEMS LEFT ON PREMISES ONE DAY AFTER SALE.  All other Machinery & Equipment must be removed by Friday, March 6, 2020

 

5.  Purchases may be removed only on presentation of paid bill.  Removal shall be at the expense, risk and liability of the purchaser.  Auctioneer shall not be responsible for goods not removed within the time allowed.

6. CONDITION:   All Items are sold on “as is – where is”, “in place”, “with all faults” basis no conditions or warranties or representation, written or oral, is given with any lot. All statements contained in Premier Asset Recovery, LLC catalog, website, and marketing material or by the auctioneers, or in any bill of sale, invoice or elsewhere as to description, size, quantity, quality, capacity, model, serial number, measurements or condition, are approximated statements and shall not be deemed to be representations or warranties, oral or written, with respect to any lot. No sale is invalid or made void by reason of any flaw in a lot or by reason of a lot being incorrectly described.  Description and Photos are not guaranteed.  Make yourself available e for the Inspection period.  It is the buyer’s responsibility to inspect before biding.  Premier Asset Recovery Group assumes no liability for error or omissions associated with the auction sale.  The buyer does hereby assume and does agree to indemnify and hold the auctioneer and seller harmless from any future claim which shall pertain the fitness or use of the assets being purchased.

7. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT.

8. RESPONSIBILITY FOR NON-DELIVERY: Neither the auctioneer nor the seller, in any event, shall be liable for non-delivery or for any other matter or thing, to any purchaser of any lot, other than for the return to the purchaser of the deposit or sum paid on said lot, should the purchaser be entitled hereto.

9. COMPLIANCE WITH TERMS OF SALE: In default of payment of bills in full within the time therein specified, the auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale including legal fees, will be charged to the defaulting purchaser.

10. RISK TO PERSON AND PROPERTY: Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the auctioneer and seller from liability therefore. Neither the auctioneer nor his principal shall be liable by reason of any defect in or condition of the premises on which the sale is held.

11. CONTRACT MOVERS: If purchaser wishes to hire or contract with a machinery mover, rigger or other type of outside contractor, PROPER INSURANCE protecting  Premier Asset Recovery Group, LLC  and the people or company that the auctioneers are conducting the sale for against any or all claims arising from personal injury and/or property damage created by their actions. This requirement is for the auctioneer`s protection - NOT FOR THE PURCHASER`S therefore the auctioneer suggests that the purchaser review the insurance policies of the machinery mover regarding the coverage that they have protecting the purchaser and damage or loss of the equipment they may be moving for the purchaser.

12. ADDITION TO OR WITHDRAWAL FROM SALE: The auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of the seller will be served, the auctioneer reserves the right to sell all the property listed, in bulk.


13.  It is the Purchaser’s sole responsibility to meet all governmental safety and environmental standards in removing, shipping and using purchased items.  Certain of the items for sale may contain “hazardous substances”, as that term is defined under federal, state or local environmental laws and regulations.  Premier has no duty to remove any hazardous substances that are contained in or are a part of any items.  Purchasers agree to defend (by counsel satisfactory to Premier) and indemnify Premier and hold Premier harmless from any against any claim.  Demand, cause of action, liability or expense (including attorney’s fees and costs) asserted against or incurred by Premier in connection with the sale, removal, shipment, or use of any purchased items.


14. DISPUTE BETWEEN BIDDERS: The auctioneer`s decision will be final and absolute.

15. RECORDS: The record of sale kept by the auctioneer and bookkeeper will be taken as final in the event of any dispute.

16. INDEPENDENT CONTRACTOR: The auctioneer is acting as an independent contractor only and is not responsible for the acts of its principals or sellers. 

17. ADDITIONAL TERMS AND CONDITIONS: The auctioneer may add other terms and conditions of sale, such additional terms and conditions to be announced prior to the auction.

18. RESERVE: The auctioneer reserves the right to reject any and all bids. On lots upon which there is a reserve, the auctioneer or his assigned agents, shall have the right to bid on behalf of the seller. 

19  These terms and conditions, and all questions with respect to the interpretation of these Terms and Conditions, shall be governed by and  construed in accordance with the internal law of the State of Illinois, without regard to conflict of law’s provisions.  All bidders expressly consent to personal and exclusive jurisdiction in the courts of the State of Illinois located in Cook County.

See Full Terms And Conditions