{ Choice of lots: 118, 119, 120, 121 } WELD FUME VACUUM, LINCOLN MDL. STATFLEX200-M, articulating collector hoses (Located at: Hudson Products...

{ Choice of lots: 118, 119, 120, 121 } WELD FUME VACUUM, LINCOLN MDL. STATFLEX200-M, articulating collector hoses (Located at: Hudson Products ...

PORTABLE FLUX RECOVERY UNIT, WELD ENGINEERING, Flux Vacuum Mdl. PF-2A/B, new 2018, S/N 122280W (Located at: Hudson Products Corp., 5615 S. 129th E...

{ Choice of lots: 123 } LOT OF WATER COOLANT SYSTEMS (2), MILLER COOLMATE 4 (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, ...

LOT OF WATER COOLANT SYSTEMS (2), MILLER COOLMATE 4 (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

{ Choice of lots: 125, 126 } MINIFLEX PORTABLE FUME EXTRACTOR, LINCOLN (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74...

{ Choice of lots: 125, 126 } MINIFLEX PORTABLE FUME EXTRACTOR, LINCOLN (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74...

{ Choice of lots: 127 } WELDING POSITIONER, CUSTOM, 250 lb. cap., manual tilt & variable rotation on fabricated stand (Located at: Hudson Prod...

{ Choice of lots: 128 } CUSTOM WELDING POSITIONER, w/ variable speed control (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, ...

CUSTOM WELDING POSITIONER, w/ variable speed control (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

LOT OF SHOP VACUUMS (3), DAYTON (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

LOT OF HYDRAULIC PALLET JACKS (2) (Note: out of service) (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

LOT OF SAFETY STEPS (5), assorted (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

{ Choice of lots: 133, 134 } LOT OF STEEL SAW HORSES (12), assorted (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

{ Choice of lots: 133, 134 } LOT OF STEEL SAW HORSES (12), assorted (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

MANUAL DIE LIFTER, DAYTON, hydraulic foot pump, 2,000 lb. cap., 63" lift ht. (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, O...

DIE CART BATTERY POWERED DIE LIFTER, WESCO (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

PNEUMATIC CLAMPING FIXTURE (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

DUST COLLECTING SYSTEM (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

LOT OF HEADER BARS, assorted (on two pallets) (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

LOT OF TOOL STORAGE CABINETS, assorted (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

VERTICAL BANDSAW, DELTA MDL. 28-276, 14", S/N 313642 (Note: needs repair) (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK ...

ABRASIVE CUT OFF SAW, EVERETT, 10" (Note: out of service) (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

DRILL PRESS, WESTWARD, (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

TURRET LATHE, WARNER & SWASEY NO.3, S/N 614944 (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134) ...[more]

HORIZONTAL BANDSAW, HEM MDL. H120LM, S/N 383193 (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

METAL CUTTING CHOP SAW, HABERLE, 12" dia., swivel vise, fabricated steel base (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa,...

GAP BED ENGINE LATHE, SHARP MDL. 1560S, new 1998, 10" dia. 3-jaw chuck, steadyrest, spds: 70-1800 RPM, 2-1/2" spdl. hole, 1/2" threading, quick ch...

RADIAL ARM DRILL, CARLTON 5' X 15", spds: 12-1200 RPM, pwr. head traverse, pwr. clamping, fabricated steel table, threading leads, S/N 3A-5719 (...

{ Choice of lots: 149, 150 } RADIAL ARM DRILL, SHARP MDL. RD-1230, 4' x 11" columns, spds: 44-1500 RPM, plane box table, air clamping fixture, 5 ...

{ Choice of lots: 149, 150 } RADIAL ARM DRILL, SHARP MDL. RD-1230, 4' x 11" columns, spds: 44-1500 RPM, plane box table, air clamping fixture, 5 ...

{ Choice of lots: 151, 152 } TWIN RAM HYDRAULIC STRAIGHTENING PRESS, CUSTOM 200 T. CAP., 120"L. x 33-1/2"W. bed, assorted straightening blocks, (...

{ Choice of lots: 151, 152 } TWIN RAM HYDRAULIC STRAIGHTENING PRESS CUSTOM 200 T. CAP., 15'L. bed, approx. 40" daylight, (2) Powerteam 100 T. hyd...

{ Choice of lots: 153 } SUB ARC SIDE BEAM ROTARY WELDING STATION, PRESTON EASTIN MDL. VSC1500-30, new 2000, approx. 18' distance btn. positioning...

{ Choice of lots: 154, 155 } SUB ARC SIDE BEAM ROTARY WELDING STATION, CUSTOM, new 1994, adjustable ht. rails, w/approx. 24" vert. travels, singl...

{ Choice of lots: 154, 155 } SUB ARC SIDE BEAM ROTARY WELDING STATION, CUSTOM, new 1994, adjustable ht. rails, w/approx. 24" vert. travels, singl...

SUB ARC SIDE BEAM ROTARY WELDING STATION, CUSTOM, new 1994, adjustable ht. rails, w/approx. 24" vert. travels, single wire sub arc head w/Lincoln ...

CNC ANGLE PROCESSING LINE, PEDDINGHAUS "ANGLEMASTER" MDL. AFPS643QCNC, new 2016, 75 T. punch cap., 230 shear cap., 1-1/2" x 1-1/2" x 1/8" min. ang...

MOVING GANTRY SUB ARC ROTARY WELDING SYSTEM, KENTEX 2-HEAD TWIN WIRE, rolling gantry, approx. 108" btn. uprights, (2) adjustable ht. rolling weld ...

ROTARY SCREW AIR COMPRESSOR, SULLAIR MDL. 20-125L, 125 HP motor, skid mtd., air cooled, 74,000 H.O.M., 110 PSI max. rated pressure, S/N 003-60337 ...

LOT OF BLIND FLANGES, assorted (large selection) (Located at: Hudson Products Corp., 5615 S. 129th E. Avenue, Tulsa, OK 74134)

ELECTRIC FIRED STRESS RELIEF FURNACE, lift-off/shelf-type, 60"W. x 48" ht. x 19'-6"L., ceramic wool lined, temperature controller (Located at: ...

TRUCK TRACTOR, 2011 PETERBILT MDL. 336 SLEEPER CAB, 485 HP Paccar MX-13 engine, Eaton-Fuller 10 spd. transmission, 6X4 driveline, 50,000 lb. G.V.W...

FLATBED TRUCK, 2006 FORD F-350 XL SUPER DUTY 1 T., Powerstroke turbo diesel 6L V8 engine, auto. trans., 11' diamond plate steel deck w/stake pocke...

DIESEL FORKLIFT, TAYLOR 25,000 LB. @ 24" LOAD CAP., Mdl. MYP-250, diesel pwrd., dual front pneu. tires, 96" forks, 96"W. fork carriage, S/N P-1461...

LARGE CAPACITY HORIZONTAL BANDSAW, AMADA 78" X 78" MDL. H-2000, 78" x 78" cap., 3.25" blade width, Giddings & Lewis air lift 60" x 72" rotary tabl...

WATERJET MACHINE, OMAX MDL. 2652, 4'-4" x 2'-2" cutting envelope, 5'-9" x 2'-6" table, 50,000 PSI pressure pump, Omax CNC control & software, S/N ...

GAP BED ENGINE LATHE, MIGHTY TURN 21" X 80" MDL. ML2180GL, new 2008, 21" swing over bed, 80" dist. btn. centers, (2) steadyrests, taper attach., d...

ENGINE LATHE, AXELSON 28.5" X 120", 28-1/2" x 120" center, spds: 20-300 RPM, 2-1/2" spdl. hole, steadyrest, 24" dia. 4-jaw chuck, S/N 3764 (Locat...

SPOT WELDER, APHIL MDL. RFTE, 20 KVA, 14" arms, 550 v., 60-cycle, weld timer, mechanical foot pedal, S/N 6898 (Located at: Abbott Machine Compan...

PARTS WASHING MACHINE, MART TORNADO 60, new 2001, 60" turntable, 48" work ht., 4,000 lb. table load, 140 to 180 deg. heating, 20 HP, S/N 7651 (Lo...

COMBINATION PLASMA/OXY FUEL CUTTER w/BEVELING, MESSER PLASMA HIGH DEFINITION 20'W. CUTTING GANTRY MDL. MPC2018, new 2008, Updated control, 20'W. c...

WELDING POSITIONER, RANSOME SIZE #160 16,000 LB. CAP., rated at 12" above table, 12" eccentric, 7-1/2 HP on tilt function, 5 HP motor on table re...

CNC HYDRAULIC PRESSBRAKE, PACIFIC 130 T. CAP. MDL. FF135-10-11 "FABRI FORMER II", made in USA, 120.5" bed length, 101-3/4" btn. housings, 7" throa...

MECHANICAL IRONWORKER, BUFFALO 130 T. CAP. MDL. 27 US, Rated specs in 65,000 lb. tensile strength mild steel are: 130 tons punch cap., 1-3/8" dia...

LARGE CAPACITY CNC SURFACE GRINDER, WILLIS DELTA MAXI MDL. 2000/100039" X 78" (1000MM X 2000MM) CAP., new 2004, NUM CNC control, variable drive, h...

GAP BED HOLLOW SPINDLE ENGINE LATHE, DEAN SMITH AND GRACE 31" X 216" CAP. MDL. 9D, 48" sw. in gap, 24" o/crosslide, 5-1/2" spdl. bore, spds: 9.9-1...

TURRET LATHE w/THREADING, WARNER SWASEY MDL. 2A LOT #521 M-3470 w/THREADING, made in USA, factory installed Cushman air powered chuck, coolant, ch...

RADIAL ARM DRILL, FOSDICK 17" COLUMN X 7' ARM, made in USA, 15 HP motor, 6 MT quill, H.D. quill up to 5-3/4" dia., 21.5" quill travel, coolant pum...

LARGE CAP. AUTOMATIC HORIZONTAL BANDSAW, HE&M, INC. 40" MDL. 2000-40, 40" round cap., pwr. clamping, 15 HP motor, 40/20 amp, 110 PSI, 10' pwr. inf...