AIR COMPRESSOR, KAESER MDL. ASD25, new 2007, 112 CFM, 125 PSI, 25 HP,  ...[more]

REFRIGERATED AIR DRYER, KAESER MDL. TC44 (*Note: in need of repair)

VERTICAL RECEIVER TANK, new 2015, approx. 500 gal. cap., approx. 34" dia. x 96" ht.

DUAL AIR COMPRESSOR, QUINCY MDL. 350-18, 5 HP

LOT CONSISTING OF: approx. (11) 50 lb. bags of aluminum oxide (on one pallet) & (10) bags of W abrasives ...[more]

LOT CONSISTING OF: lifting slings & metal shaft hooks ...[more]

LOT CONSISTING OF: (1) 55 gal. drum of Waylube 220-d (unopened), (1) 55 gal. drum of Trim Microsol 585XT (about 1/4 drum) & (1) 55 gal. drum of Lu...

LOT OF RAW MATERIAL: 304 S.S. Zeron, 410 S.S., 316 S.S., 416 S.S., on (2) dbl. cantilever racks (*Note: most material has material test report ce...

LOT OF RAW MATERIAL: 316 S.S. & 416 S.S., on (2) dbl. cantilever racks (*Note: most material has material test report certifications available) ...

LOT OF RAW MATERIAL: 416 S.S. & some carbon steel bars, on wooden rack (*Note: most material has material test report certifications available) ...

LOT OF RAW MATERIAL: 17-4 S.S, 3-1/2" dia. & 4" dia. (on two wooden racks), approx. 12'L. 17-4 S.S. bars (on floor) ...[more]

LOT OF RAW MATERIAL: 1045 ground bar, 17-4 S.S. & carbon steel bars, on metal cantilever rack ...[more]

{ Choice of lots: 123, 124 } LOT OF STEEL DRUM CADDIES (5), 55 gal. ...[more]

{ Choice of lots: 123, 124 } LOT OF STEEL DRUM CADDIES (5), 55 gal. ...[more]

SUMP SUCKER, MASTER CHEMICALS SUMP CLEANER, elec. drive, hoses & controls ...[more]

{ Choice of lots: 126, 127 } LOT CONSISTING OF METAL SPRAY POWDERS: by Metco, Surface Engineering, LSN Diffusion, Oerlikon Metco, Praxair & other...

{ Choice of lots: 126, 127 } LOT CONSISTING OF METAL SPRAY POWDERS: by Metco, Surface Engineering, LSN Diffusion, Oerlikon Metco, Praxair & other...

LOT OF TIG WELDING WIRE (approx. 30 rolls)

LOT OF UNIBRAZE TIG WELDING ROD, large quantity

{ Choice of lots: 130, 131 } SPRAY LATHE, ARZELL "TALL LATHE", new 2017, approx. 48" sw. x 60" CC, 12" dia. 3-jaw chuck, Drawing #2017-0046-4, S/...

{ Choice of lots: 130, 131 } SPRAY LATHE, ARZELL "TALL LATHE", new 2017, approx. 48" sw. x 60" CC, 12" dia. 3-jaw chuck, Drawing #2017-0046-4, S/...

FREE STANDING PEDESTAL CRANE, GORBEL 1/4 T., W/1/4 T. HOIST, APPROX. 12' REACH, APPROX. 10' HEIGHT ...[more]

LOT OF PRESSURE GAGES, PROSTAR, APPROX. 20, HAVE TO BE REMOVED, NO PIPING ...[more]

LOT OF H.D. GALVANIZED STOCK TANKS (5), 1' x 2' x 6', w/Vermiculite

LOT CONSISTING OF: chain link fencing & posts ...[more]

GRINDING WHEEL BALANCER, w/ arbor

LOT OF GRINDING WHEEL BALANCING ARBORS (2)

LOT OF C-CLAMPS

CIRCUIT BOX, EATON MDL. JEZB2072R, 600 amp, 3P circuit breaker

LOT OF WALL MOUNTED LOCKING ENCLOSURES (4), 20" x 20" x 12"

CHOP SAW, EVERETT 8" MDL. 8-7

LOT CONSISTING OF: pipe fittings, Tees, nipples, elbows, unions (in two crates)

LOT OF STEEL DIAMOND GRATE FLOOR WALKWAYS, 2' x 8'

LOT OF AIR LINE (on one pallet)

LOT CONTENTS OF STORAGE AREA: (2) 18" x 36" x 74" ht. cabinets, (1) 16" x 49" x 72" ht. storage shelf, (1) storage shelf w/grinding wheels

LOT OF WORK RESTS, 12" to 32" lengths (for centerless grinders)

LOT OF CENTERLESS GRINDER FILTER PAPER, rolls 8" to 40" in length

LOT OF STORAGE RACKS (2), 20" x 108" 42" ht., w/contents (guides not included)

PEDESTAL CARBIDE GRINDER, 6", 1/2 HP, 3,450 RPM

PEDESTAL GRINDER, DEWALT 8" MDL. DW758

{ Choice of lots: 147 } PEDESTAL GRINDER, BALDOR 6"

{ Choice of lots: 148, 149, 150, 151 } RATCHET ARBOR PRESS, DAKE NO. 3A1, on fabricated stand

{ Choice of lots: 148, 149, 150, 151 } RATCHET ARBOR PRESS, GREENERD NO. 3-1/2, on fabricated stand

{ Choice of lots: 148, 149, 150, 151 } RATCHET ARBOR PRESS, GREENERD NO. 3-1/2, on fabricated stand

{ Choice of lots: 148, 149, 150, 151 } RATCHET ARBOR PRESS, FAMCO 31R, on fabricated stand

{ Choice of lots: 152 } RATCHET ARBOR PRESS, on stand

RATCHET ARBOR PRESS, on stand

METAL STAND, w/Rigid pipe vise

LOT OF FOREMAN'S DESKS (2)

LOT CONTENTS OF MAINTENANCE AREA: fuses, belts, fasteners, filters, bearings, etc.

{ Group of lots: 156, 156A } LOT OF METAL CARTS (5)

{ Group of lots: 156, 156A } LOT OF METAL CARTS (5)

{ Group of lots: 156B, 156C } LOT OF (2) IN PROCESS GRINDING GAGES ARNOLD GAGE WITH EXTRA GAGE FRAME AND ADJUSTABLE CALIPERS, MDL.43212 ...[more]

{ Group of lots: 156B, 156C } LOT OF (2) IN PROCESS GRINDING GAGES ARNOLD GAGE WITH EXTRA GAGE FRAME AND ADJUSTABLE CALIPERS, MDL.43212 ...[more]

LOT OF METAL TABLES (5), approx. 30" x 60"

LOT OF GRINDING WHEELS (for O.D. & centerless grinders) ...[more]

LOT OF MACHINE SKATES: (2) Dayton 4,400 lb. cap. Mdl. SF20 & (2) In-House design ...[more]

LOT OF DIAMOND SANDING BELTS

{ Choice of lots: 160A } FREE STANDING PEDESTAL CRANE, KRAN, 1/2 T. X 9' REACH X 6-1/2' HEIGHT, w/ Dayton 1/4 T. cap. hoist

{ Choice of lots: 160B, 160C } FREE STANDING PEDESTAL CRANE, 1/2 T. X 8' REACH X 6-1/2' HEIGHT, no hoist