{ Choice of lots: 121, 122 } COMPRESSION MOLDING PRESS, TUNG-YU 950 T. CAP., new 2008, 51.25” x 43.5” platen (Machine No. 61)

{ Choice of lots: 121, 122 } COMPRESSION MOLDING PRESS, TUNG-YU 950 T. CAP., new 2008, 51.25” x 43.5” platen (Machine No 62)

COMPRESSION MOLDING PRESS CELL, TUNG-YU MDL. TYC/10/3/S/PCS 3-CELL, (3) 100 T. presses, mfg. date 11/2002, 26.28 KW heating cap., 22.5 KW motor, ...

COMPRESSION MOLDING PRESS CELL, TUNG-YU MDL. TCY/8/6/S/PCD 6-CELL, (6) 80 T. presses, 52.56 KW heating cap., 22.5 KW motor, 480 v., 16” x 16” pla...

LOT OF SPLIT CARTRIDGE HEATERS & KNOCKOUT PINS ...[more]

{ Choice of lots: 125 } RUBBER MILL, STEWART BOLLING & CO., Size 16.24DBI, Heli-Cal spd. reducer, 42.6:1 ratio, General Electric 150 HP drive mot...

RUBBER MILL, STEWART BOLLING & CO., Western OD60M gear reducer, Reliance 150 HP motor, (2) 60”L. x 22” dia. rolls 440 v. ...[more]

RUBBER EXTRUDER PRECISION PREFORMER, BARWELL TYPE C3GP, 10” I.D., swing away end section, 2,500 PSI, 30 in/Hg vacuum pressure, 0-400 PSID differen...

AUTOCLAVE, ANCHOR MCIVER & SMITH FABRICATION, new 2008, 47” I.D. x 48’, 90 PSI @ 400 deg., electric fired, 4,000 lb. weight, redesigned & rerated ...

{ Choice of lots: 129 } AUTOCLAVE, CEDCO, 48” I.D. x 24’L., 100 PSI @ 450 deg., electric fired, Rapidoor, rail system w/ internal & external rail...

AUTOCLAVE, HERCULES INDUSTRIES MDL. 1523C, 48” I.D. x 21’, 100 PSI @ 450 deg., electric fired, Rapidoor, rail system w/internal rails, S/N 1039

AUTOCLAVE SYSTEM, ANCHOR, 48” I.D., bolt-up door, no heat system, 48’ rail system w/internal & external rails ...[more]

VERTICAL RUBBER INJECTION PRESS, DESMA MDL. D956.050, new 2002, up-acting design, Desma Mdl. DRC1210 control, Neslab Mdl. HX150 recirculating chil...

CLICKER PRESS, USM MDL. B, 40” x 20-1/2” table, 230 v., 60 cycle, 3 phase, S/N 4171

LOT OF BALL CAPS ...[more]

{ Choice of lots: 134, 135, 136 } RADIO FREQUENCY PREHEATER, NEMETH ENGINEERING MDL. LE550, 14” x 14” table, 5 KW, 480 v., S/N 1209N

{ Choice of lots: 134, 135, 136 } RADIO FREQUENCY PREHEATER, FDC FDP MDL. 1023M, Mfg. No. 43302, S/N 1023M

{ Choice of lots: 134, 135, 136 } RADIO FREQUENCY PREHEATER, NEMETH ENGINEERING MDL. 300, 5 KW, 480 v. S/N 1211N

HYDRAULIC PRESS, PHI 70 T. CAP. MDL. S70-253C-Y3, 1-1/2 HP press motor

INJECTION MOLDING MACHINE, KRAUSS MAFFEI 175 T. CAP. MDL. 175-1400 C2, new 2005, Type KM, S/N 61007014

TENSILE TESTER, INSTRON MDL. 4411, S/N 1292

RHEOMETER, ALPHA TECHNOLOGIES MDL. MDR-2000, new 2014, S/N 3AAAD4700

The FRAC BALL MOLDS & GRINDERS will be offered piecemeal as lots 141A, 141B and 141C and the high bid for each will be "on hold".  Then, those thr...

LOT CONSISTING OF FRAC BALL MOLDS: (approx. 11) Large Molds from 1-3/4” to 2-3/4” dual cavity; (approx. 13) Small Molds from ¾” to 1-3/4” ...[mor...

BALL GRINDER, Vertisphere Mdl. 16/24 ball grinder, variable spd. control, 0-100 FPM w/several grinding plates. ...[more]

BALL SHAPER, Custom ball shaper w/3-head design, 1/5 HP per head. ...[more]

ABRASIVE BLAST SHOTBLASTING MACHINE, WHEELABRATOR MDL. SLT3.0 SMART LINE RUBBER BELT TUMBLEBLAST, new 2008, 3 cu. ft. cap., 11 HP direct drive whe...

ABRASIVE BLAST SHOTBLAST MACHINE, WHEELABRATOR RUBBER BELT TUMBLEBLAST , 3 cu. ft. cap., dust collection system, (1) blast wheel, dust collector, ...

ABRASIVE BLAST SHOTBLAST MACHINE, WHEELABRATOR PIPE BLAST, skew roller infeed & outfeed, dust collection system, 25 HP direct drive blast wheel, c...

CNC FLATBED LATHE, SUMMIT SMARTCUT 30, MDL. SC30-6X200M, new 2014, Fagor 8055TC CNC control, 30” sw. over bed, 22” sw. over crosslide, 200” btw. c...

LARGE CAPACITY HOLLOW SPINDLE LATHE, SUMMIT 47” X 480” MDL. 47-12X480, new 2014, 12-1/2” spdl. bore, 32.6” sw. over cross slide, 22,000 lbs. btn. ...

ENGINE LATHE, LEBLOND 32” X 264” MDL. 3220 HEAVY DUTY, 32” sw. over ways, 20” sw. over crosslide, approx. 264” dist. btn. centers, taper attach., ...

GAP BED ENGINE LATHE, SUMMIT 30” X 200” MDL. 30-6X200, new 2014, 22” sw. over crosslide, 6.1” spdl. bore, spds: 11-700 RPM, 20 HP, taper attach., ...

GAP BED ENGINE LATHE, MAUSER 44” X 30’, 27-1/2” dia. 4-jaw chuck, custom rack & pinion pwr. feed control, tailstock, steadyrest, (no leadscrew or ...

{ Choice of lots: 150, 151 } ELASTOMER CUTTING SYSTEM, PROSCO MDL. 200 ROLLER GROOVING TYPE, w/electric heated cutter ...[more]

{ Choice of lots: 150, 151 } ELASTOMER CUTTING SYSTEM, PROSCO MDL. 200 ROLLER GROOVING TYPE, w/electric heated cutter ...[more]

{ Choice of lots: 152 } ELASTOMER CUTTING SYSTEM, PROSCO MDL. 200 ROLLER GROOVING TYPE, w/electric heated cutter ...[more]

ELASTOMER CUTTING SYSTEM, PROSCO MDL. 200 ROLLER GROOVING TYPE, w/electric heated cutter ...[more]

GAP BED ENGINE LATHE, SUMMIT 28” X 160” MDL. 28X160B, new 2014, 19.6” sw. over crosslide, 36.5” sw. in gap, 4.1” spdl. bore, spdl. spds: 12.5-1250...

{ Choice of lots: 155 } GAP BED ENGINE LATHE, SUMMIT 24” X 80” MDL. 24X80B, new 2014, 17” sw. over crosslide, 33” sw. in gap, 4.1” spdl. bore, sp...

{ Choice of lots: 155, 156 } GAP BED ENGINE LATHE, SUMMIT 24” X 80” MDL. 24X80B, new 2014, 17” sw. over crosslide, 33” sw. in gap, 4.1” spdl. bor...

{ Choice of lots: 157, 158 } GAP BED ENGINE LATHE, SUMMIT 24” X 60” MDL. 24X60B, new 2014, 17” sw. over cross slide, 33” sw. in gap, 4.1” spdl. b...

{ Choice of lots: 157, 158 } GAP BED ENGINE LATHE, SUMMIT 24” X 60” MDL. 24X60B, new 2014, 17” sw. over cross slide, 33” sw. in gap, 4.1” spdl. b...

ENGINE LATHE, LEBLOND REGAL 24” X 120”, 12” dia. 4-jaw chuck, spds: 13-1000 RPM

BENCH TOP LATHE, CLAUSING 6” X 24”, collet chuck

BENCH TOP LATHE, JET 9” x 20” MDL. BD-920W

LOT CONSISTING OF: cabinet, shelving & assorted lathe centers, toolpost, etc. ...[more]

LOT CONSISTING OF: cabinet, bench, cart, lathe centers, toolholders & cutters ...[more]

{ Choice of lots: 164 } TOOLPOST GRINDER, THEMAC

{ Group of lots: 165, 166 } TOOLPOST GRINDER, DUMORE

{ Group of lots: 165, 166 } PNEUMATIC TOOLPOST SANDER, DYNABRADE

LOT OF QUICKCHANGE TOOLPOSTS (2)

{ Choice of lots: 168, 169 } PNEUMATIC TOOLPOST SANDER, DYNABRADE

{ Choice of lots: 168, 169 } PNEUMATIC TOOLPOST SANDER, DYNABRADE

LOT OF SANDING FIXTURES, PRISMONT, assorted

CNC VERTICAL MILL, SUMMIT SMART CUT MDL. EVS-350B-CNC, new 2014, Fagor CNC control, 10” x 58” table, Troyke Mdl. DL-12-B rotary table w/12” dia. 3...

VERTICAL TURRET MILL, CLARK MDL. 2VS, new 2011, 9” x 49” table, Seno Mdl. SDS6-2V 3-axis D.R.O., spds: 60-4200 RPM, long. pwr. feed, pwr. elevatio...

VERTICAL TURRET MILL, KONDIA POWERMILL MDL. G, 9” x 42” table, power feed, step pulley head, S/N H-116

VERTICAL BANDSAW, MARVEL SERIES 81-A, S/N D-325778

HORIZONTAL BANDSAW, KALAMAZOO 12”