LOT OF LIFTING SLINGS (6), BISHOP, (2) 30' x 4" x 20,400 lb. vertical, (2) 24' x 4" x 20,400 lb. vertical, (2) 16' x 4" x 20,400 lb. vertical

LOT OF STEPLADDERS (9), WERNER, 2-step

SIDE BEAM WELDER, WEBB MDL. U-10 CANTILEVER DESIGN, 44' rail length, approx. 78" reach, adj. rail ht. x center drive screw, hyd. transverse adjust...

POWER TURNING ROLL SET, BOWERS APPROX. 60 T. CAP., 18" dia. x 6" triple rubber tires w/overload discs, H.D. right angle gear box design, adj. cent...

ARC WELDER, LINCOLN MDL. IDEALARC 250, 250 amps @ 30% duty cycle, S/N AC355382

LOT CONSISTING OF: steel fabricated storage cabinets, etc. (approx. 16)

LOT CONSISTING OF: steel fabricated worktables, rolling carts, etc. (approx. 17 units)

WELDING POSITIONER, SHOP FABRICATED/CUSTOM 500 LB. CAP., 24" dia. platen

WIRE CABLE UNWIND STAND, CUSTOM, w/cable

WELDING POSITIONER, RANSOME 10,000 LB. CAP. MDL. 100P, S/N 216337 ...[more]

{ Choice of lots: 186, 187 } } } WELDING POSITIONER, WORTHINGTON 2,500 LB. CAP. SIZE 25P, 55" sq. platen, w/32" sq. platen & 3-jaw chuck, S/N 566...

{ Choice of lots: 186, 187 } } } WELDING POSITIONER, WORTHINGTON 2,500 LB. CAP. SIZE 25P, 55" sq. platen, w/32" sq. platen & 3-jaw chuck, S/N 557...

PISTON PUMP, KERR MDL. KM3250 MUSTANG, 10,000 PSI @ 1" plunger, 8,400 PSI @ 1-1/4" plunger, 40 HP motor, skid mtd., S/N 852B

{ Choice of lots: 189, 190 } } } POWER TURNING ROLL SET, PRESTON EASTIN 5 T. CAP. MDL. 1PAA1CU5, new 1999, mtd. to pwrd. roller cart, 78" track g...

{ Choice of lots: 189, 190 } } } POWER TURNING ROLL SET, PRESTON EASTIN 5 T. CAP. MDL. 1PAA1CU5, new 1999, mtd. to pwrd. roller cart, 78" track g...

POWER TURNING ROLL SET, PANDJIRIS 34 T. CAP., 10" x 20" rubber tires, variable spd. drive, pendant control w/idler, adj. centers

ROTARY SCREW AIR COMPRESSOR, INGERSOLL RAND MDL. R110N NIRVANA VSD, new 2011, 150 HP variable spd. motor, 145 PSIG max. discharge pressure, air co...

ROTARY SCREW AIR COMPRESSOR, INGERSOLL RAND MDL. PA125V, 125 HP motor, air cooled, separate cooler unit, S/N 97179U77833

VERTICAL AIR RECEIVER TANK, steel fabricated

FORKLIFT, KALMAR 55,000 LB. CAP. MDL. DC25, new 1989, diesel pwrd., 55,000 lb. cap. @ 48" L.C., 133"/128" mast, 96"L. forks, solid foam filled tir...

FORKLIFT, TAYLOR BIG RED 33,000 LB. CAP. MDL. THD-330M, diesel pwrd., 2-stage mast, 33,000 lb. cap. @ 24" L.C., 25,575 lb. cap. @ 36" L.C., 180" m...

FORKLIFT, TOYOTA 3,000 LB. CAP. MDL. 6FGCU25, LP pwrd., 3,000 lb. cap. @ 24" L.C., 189" max. lift, side shift, cushion tires, dock lights, S/N 748...

CARRY DECK CRANE, BRODERSON 26,000 LB. CAP. MDL. RTR1601AS, 6' boom radius, S/N 150H (currently inoperable) ...[more]

STEAM CLEANER, ELITE, w/roller cart base

WELDING MANIPULATOR, PRESTON EASTIN MDL. 12X12, rotating column w/sq. steel base, sub-arc welding head, Lincoln Mdl. NA-3S weld controllers, with ...

POWER TURNING ROLL SET, PANDJIRIS APPROX. 10 T. CAP. MDL. PR-100, w/idler set, S/N 41-0666

ARC WELDER, LINCOLN MDL. IDEALARC 250, 250 amps, 30% duty cycle, Air Arc gouging leads, S/N C1010700223

WELDING MANIPULATOR, RANSOME MDL. 1212RF, 15' horiz. travel, 12' vert. travel, rotating column base w/steel pad, Lincoln Mdl. NA-3S sub-arc weld c...

POWER TURNING ROLL SET, BOWERS APPROX. 60 T. CAP., 18" dia. x 6" triple rubber tires w/overload discs, H.D. right angle gear box design, adj. cent...

MIG WELDER, MILLER MDL. CP302, 300 amps @ 32 v. rated output, 100% duty cycle, Miller S60 wire feeder, on portable cart, S/N KJ068445

{ Choice of lots: 205 } } } WELDING MANIPULATOR, RANSOME MDL. 1212RF, new 1997, 12' horiz. travel, 12' vert. travel, rotating column base w/steel...

POWER TURNING ROLL SET, PANDJIRIS APPROX. 30 T. CAP. MDL. PR100, w/idler set

ARC WELDER, LINCOLN MDL. IDEALARC 250, 250 amps, 30% duty cycle, S/N AC329058

MIG WELDER, MILLER MDL. CP300, 300 amps @ 32 v. rated output, 100% duty cycle, Miller 24 v. wire feeder, S/N KF794166

POWERED FIT-UP ROLL, CUSTOM, 28" & 38" adj. centers, 84"L. x 12" dia. rolls, (2) independent pwr. drives, 33' ttl. length, (5) roll sections

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (57 boxes - 60 lbs. ea.) (on one ...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 209, 210, 211, 212, 213, 214, 215 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-50, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (on one...

{ Option of lots: 216, 217, 218 } } } LOT OF WELDING FLUX, LINCOLN MDL. L9807-SUG001 (64 bags - on one pallet)

{ Option of lots: 216, 217, 218 } } } LOT OF WELDING FLUX, LINCOLN MDL. L9807-SUG001 (64 bags - on one pallet)

{ Option of lots: 216, 217, 218 } } } LOT OF WELDING FLUX, LINCOLN MDL. L9807-SUG001 (64 bags - on one pallet)

LOT OF WELDING FLUX, LINCOLN MDL. L9807-SUG001 (11 bags - on one pallet)

STEEL CABINET, w/misc. welding rod & wire

LOT OF COPPER POINTED ELECTRODES

{ Choice of lots: 222, 223, 224 } } } SUSPENDED HEATER, DAYTON 20", natural gas fired

{ Choice of lots: 222, 223, 224 } } } SUSPENDED HEATER, DAYTON 20", natural gas fired

{ Choice of lots: 222, 223, 224 } } } SUSPENDED HEATER, DAYTON 20", natural gas fired

{ Group of lots: 225, 226 (P) } } SUSPENDED HEATER, RE-VERBER-RAY 26", natural gas fired

{ Group of lots: 225, 226 (P) } } SUSPENDED HEATER, RE-VERBER-RAY 26", natural gas fired

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-90, 1/8" (3.2mm) (36 boxes - 60 lbs. ea.) (o...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-90, 1/8" (3.2mm) (44 boxes - 60 lbs. ea.) (o...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-90, 1/8" (3.2mm) (54 boxes - 60 lbs. ea.) (o...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. L-61, 1/8" (3.2mm) (39 boxes - 60 lbs. ea.) (on...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-75, 1/8" (3.2mm) (50 boxes - 60 lbs. ea.) (o...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-75, 1/8" (3.2mm) (12 boxes - 60 lbs. ea.) (o...

{ Choice of lots: 227, 228, 229, 230, 231, 232, 233, 234 } } } LOT OF WELDING WIRE, LINCOLN MDL. LA-100, 1/8" (3.2mm) (29 boxes - 60 lbs. ea.) (...