Filtered by:
- Category
- List
- Grid
-
25 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Dake 10,000 PSI Hydraulic Shop Press 20" Between Posts, 2" Diameter Ram, 10,000 PSI Hand Pump
Aida FT-N50G 550 Ton Straight Side Double Crank Press Stroke 12", Strokes per Minute 30-50, Bed 48" x 120", Shut Height 33", 4" Slide Adjustment, ...
Coe Press CPR-6018 6000 Lb. Capacity Motorized Reel Hold Down Arm, Width 18" S/N 519742
1980 Komatsu E2P300W 330 Ton Straight Side Double Crank Press Stroke 7.87", Strokes per Minute 30-60, Bed 51" x 98", Shut Height 30.39", Motorized...
Niagara SC2-75-60-30 75 Ton Straight Side Double Crank Press Stroke 6", Strokes per Minute 50, Bed Area 30" x 60", Shut Height 16", Adjustment 6" ...
Bliss HP2-100-48-30 100 Ton Straight Side High Speed Press Stroke 4", Bed 30" x 48", Shut Height 18", Slide Adjustment 3", Vamco #BK213 Feed S/N H...
Warco 75 Ton Straight Side Double Crank Press Stroke 8", Strokes per Minute 45, Bed 26" x 72", Shut Height 19", Adjustment 6" S/N 53266
Warco 150 Ton Gap Frame Press Stroke 10", Strokes per Minute 30, Bed 34" x 51", Slide 26" x 26", Shut Height 20", Adjustment 4.5" S/N 461216
Warco 100-2-44 100 Ton Gap Frame Press Bed 30" x 57", stroke per minute 30, slide adjustment 4.5, pressure to operate clutch 80lbs
Warco 75-2-44 75 Ton Gap Frame Press Stroke 8", Strokes per Minute 45, Bed 22" x 60", Shut Height 18", Adjustment 3" S/N 57P-1192-1
USI Clearing 150 Ton Open Back Inclinable Press Stroke 8", Strokes per Minute 35, Shut Height 24.5", Adjustment 5",bolster plates 33 inches wide a...
Verson 250 Ton Open Back Inclinable Press Stroke 8", Strokes per Minute 35, Bed 35" x 54", Shut Height 28.5", Motorized Adjustment 5" S/N 18476
Verson 10-F 215 Ton Gap Frame Press Stroke 12", Strokes per Minute 20-32, Bed 39" x 62", Shut Height 30", Slide Adjustment 5", Bolster plate 39 in...
Federal 10 125 Ton Gap Frame Press Stroke 10", Strokes per Minute 45, Bed 28" x 40", Shut Height 23.5" S/N 10-187
Federal F55 55 Ton Gap Frame Press Bed 30" x 50", Slide 8.5" x 36", Bolster Plate 36 inches wide and 50 inches long and 4 inches thick
Chicago Stamping Press
Chicago Stamping Press Tons 60, stroke 4", shut height 12" spm 60, slide adustment 3 inches, bed area left to right 42", front and rear 26"inches,...
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 36 inches long, 25 inches wide for top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 45 inches long 27 inches wide top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 27 inches long and 22 inches wide top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 44 inches long and 25 inches wide top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 30 inches long and 23 inches wide top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 44 inches long and 23 inches wide top/bottom
Steel Press Die
{ Group of lots: 58, 59, 60, 61, 62, 63, 64 } Steel Press Die 36 inches long and 25 inches wide top/bottom
Tishken COT-10 Approx. 50 Ton Cut-Off Press with Swivel Base S/N 16154-776
-
25 item(s)/page