126
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLot
126
Power Products Arbor Press No.3 3 Ton
For Machinery Network Auctions delivery information please telephone 818-788-2260.
CNC Machining, Boring, and Turning
Hurco VM20 CNC Vertical Machining Center, MAX control, 40"x20"x20" travels, CT-40 taper, 20 position tool changer, ATC, New 2011
Leadwell MCV-1300P 4 Axis CNC Vertical Machining Center, Fanuc 0M control, 51" x 29" x 22" travels, CT-50 taper, 20 position tool changer, new 1991
Mori-Seiki MV Junior CNC Vertical Machining Center, Fanuc 10M control, CT-40 taper, 20 position tool changer, new approx. 1988
Mori-Seiki SL-35B CNC Turning Center, Fanuc 10T control, 4.1" spindle bore, 23.6" swing, 35" centers, 12" 3 jaw chuck, tailstock, chip conveyor, New approx. 1988
Daewoo Puma 10S CNC Turning Center, Fanuc 0T control, 3.1" spindle bore, 22.8" swing, 31" centers, 10" 3 jaw chuck, tailstock, chip conveyor, New 1990
Leadwell LTC-20AP CNC Turning Center, Fanuc 0T control, 2.4" spindle bore, 20.9" swing, 24" centers, collet chuck, tool probe, chip conveyor, New 1992
8" Yuasa CPDX-8 CNC Rotary Table, CPNC-500 control, 3 jaw chuck
Boring Mills
Toshiba TSS-13A Vertical Boring Mill, 48" table, 63" swing, 31.5" turning height, turret head, DRO, new approx. 1975
Supermill AL-76 Table-Type Horizontal Boring Mill, 3" spindle diameter, approx. 80" x 54" x 40" travels, 48" x 36" rotary table, DRO, new approx. 1980
Tool Room Equipment:
Hercules-Ajax HR-3000 Gap Bed Engine Lathe, 25"/37.5" swing x 120" centers, 4.5" spindle bore, taper attachment, I/M threading, 18" 3 jaw chuck, face plate, steady rest, new approx. 1985
Clausing Colchester 17 Engine Lathe, 17" swing x 84" centers, I/M threading, 12" 3 jaw chuck, new approx. 1975
Mori Seiki MS-850G Gap Bed Engine Lathe, 17" swing x 35" centers, I/M threading, DRO, 10" 3 jaw chuck, new approx. 1975
Hardinge HLV-H Tool Room Lathe, 11" swing x 18" centers, collet chuck, New 1975
(4) Lagun FTV-1 Vertical Mill, 9" x 42" table, 2 HP, DRO, power X & Y feeds, power drawbar, new approx. 2000
Bridgeport Vertical Tracer Mill, 9" x 60" table, (2) 1 HP milling heads, Tru-Trace hyd tracer, hyd table feed,
Brown & Sharpe No. 20 Universal Horizontal Mill with vertical head, new approx. 1970
SIP MP-3k Precision Jig Bore, 27" x 18" table, new approx. 1975
Easco Toolmaker 816 Ram Type EDM, 16" x 24" table, 3R tool holder, new 1980
Jet JRD-700 Radial Drill, 7.5" column, 28" arm, 2 HP, box table, new 1980
Powermatic 1150 Drill Press, new approx. 1980 - in storage
36" Blanchard No. 18 Rotary Surface Grinder, electromagnetic chuck, new 1953
K.O. Lee S618H, Hyd Surface Grinder, 6" x 18" magnetic chuck, new 1968
Hyd. Surface Grinder, unknown mfg. & model 8" x 24" magnetic chuck, new approx. 1970
Brierly ZB-25 Drill Grinder, mounted on cabinet with tooling, new 1970's
Cuttermaster HDT-30 Drill Grinder, mounted on cabinet with tooling, s/n 1477A
K.O. Lee BA960 Tool & Cutter Grinder, new early 1980's
Sunnen MBB-1660 Horiz Hone, manual, Sunnen tooling cabinet, new 1980's
Trinco 36 B/P Abrasive Blast Cabinet with media reclamation, New mid 1990's
DoALL C-260A Automatic Horiz. Band Saw, 10 1/4" x 12" capacity, power infeed table, new 1988
DoALL C-305A Automatic Horiz Band Saw, 12" x 12" capacity, New 2000 - not under power
Roll-In Unuiversal Band Saw, manual, 12" x 18" cap, New approx. 1980
DoALL ML-16 Vertical band Saw, 16" throat, blade shear, weld and grind, new 1960's
H-Frame Hydraulic Press, Mfg & Model unknown, approx. 50 ton, sliding ram & adjustable bed
20 Ton Carolina H-Frame Hyd. Press, s/n P20581, New 1980's
15 ton Rouselle 2E OBI Press, 12" x 16" bed, s/n Na, new approx. 1980 - in storage
Welding Equipment:
Miller Syncrowave 351 TIG Welding Power Supply, Miller coolant system, tanks, gauges and cables, New 1990's
Air Products 325 MIG Welding Power Supply, coolant system, tanks, gauges and cables, New 1980's
Lincoln AC-225-S Stick Welding Power Supply,
Moore FBG27HTT Heat Treat Furnace, 2300 deg F max temp
(2) steel round welding tables
Test and Inspection Equipment:
G&L Sheffield Cordax 1805 MEA Coordinate Measuring Machine, manual, PC DMIS software, PC, Renishaw TP1 touch probe, 1989
14" GenX 3414 Optical Comparator, analog, new 1982's
(2) GageMaster ID Gauges
Enco Brinnell Hardness Tester, analog
(2) Mitutoyo HeightMaster Height Gauges
72" x 48" Collins Precision Granite Surface Plate, single lip, steel stand
60" x 36" Granite Surface Plate - shop grade
Metrology equipment including calipers, micrometers, height gauges, sine plates, precision angles, small granite surface plates, bore gauges, pin & block gauge sets, precision bench centers.
Facilities and Rolling Stock:
5000lb World-Lift WFC-50C Forklift, LPG, triple mast, side shift, s/n TC01063, New approx. 2010
Rolling Gantry Crane, chain fall, approx. 1000lb cap.
Pittsburgh Engine Hoist
(2) Rolling Die Lifts
20 HP Quincy Reciprocating Air Compressor with tank, new mid 1980's
20 HP Air Service Reciprocating Air Compressor with tank, new mid 1980's
10 HP Reciprocating Air compressor with tank,
Lot of shop and office furniture and storage to include tool & storage cabinets, cantilever racks, heavy duty pallet racking, workbenches, desks, tables, chairs, stools & shelves, carbide grinders, pedestal grinders, belt & disc sanders, cut-off saws and hand held power tools, rotary tables, dividing heads, indexing heads, vises, angle plates & assorted part fixturing ,machining center & mill tool holders, ID & OD turning tool holders, chucks, collets, Lyndex spindle attachments, tapping heads, lathe tool posts & centers, and much more.
***Approved Rigger***
JMOR Machinery Movers - Masten Palmer - 817-913-4088
***Removal by Appointment Only***
TERMS and CONDITIONS of Auction:
Registration & Bidding:
Only one (1) Bidder per paddle number is allowed. The party whose information is provided at the time of registration is responsible for all purchases of made under that Bidder paddle number. Machinery Network Auctions, Inc. (MNA) reserves the right to refuse issuing a paddle number for any reason it believes necessary to protect the integrity of the bid.
Disclaimer & Acknowledgement:
MNA and seller expressly disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. These terms are merely meant to be representative; by registering for and/or bidding in this auction, you are expressly acknowledging and agreeing to these Terms as well as all of the Terms and Conditions in both the Bid Card and Auction Catalogue.
Payment:
All bidders are required to pay in full within 48 hours of invoice date – NO EXCEPTIONS
Removal:
Purchased lots will not be released until payment has been received in full. Wire transfers must clear in order for payment to be considered “received in full”
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
Power Products Arbor Press No.3 3 Ton
For Machinery Network Auctions delivery information please telephone 818-788-2260.
CNC Machining, Boring, and Turning
Hurco VM20 CNC Vertical Machining Center, MAX control, 40"x20"x20" travels, CT-40 taper, 20 position tool changer, ATC, New 2011
Leadwell MCV-1300P 4 Axis CNC Vertical Machining Center, Fanuc 0M control, 51" x 29" x 22" travels, CT-50 taper, 20 position tool changer, new 1991
Mori-Seiki MV Junior CNC Vertical Machining Center, Fanuc 10M control, CT-40 taper, 20 position tool changer, new approx. 1988
Mori-Seiki SL-35B CNC Turning Center, Fanuc 10T control, 4.1" spindle bore, 23.6" swing, 35" centers, 12" 3 jaw chuck, tailstock, chip conveyor, New approx. 1988
Daewoo Puma 10S CNC Turning Center, Fanuc 0T control, 3.1" spindle bore, 22.8" swing, 31" centers, 10" 3 jaw chuck, tailstock, chip conveyor, New 1990
Leadwell LTC-20AP CNC Turning Center, Fanuc 0T control, 2.4" spindle bore, 20.9" swing, 24" centers, collet chuck, tool probe, chip conveyor, New 1992
8" Yuasa CPDX-8 CNC Rotary Table, CPNC-500 control, 3 jaw chuck
Boring Mills
Toshiba TSS-13A Vertical Boring Mill, 48" table, 63" swing, 31.5" turning height, turret head, DRO, new approx. 1975
Supermill AL-76 Table-Type Horizontal Boring Mill, 3" spindle diameter, approx. 80" x 54" x 40" travels, 48" x 36" rotary table, DRO, new approx. 1980
Tool Room Equipment:
Hercules-Ajax HR-3000 Gap Bed Engine Lathe, 25"/37.5" swing x 120" centers, 4.5" spindle bore, taper attachment, I/M threading, 18" 3 jaw chuck, face plate, steady rest, new approx. 1985
Clausing Colchester 17 Engine Lathe, 17" swing x 84" centers, I/M threading, 12" 3 jaw chuck, new approx. 1975
Mori Seiki MS-850G Gap Bed Engine Lathe, 17" swing x 35" centers, I/M threading, DRO, 10" 3 jaw chuck, new approx. 1975
Hardinge HLV-H Tool Room Lathe, 11" swing x 18" centers, collet chuck, New 1975
(4) Lagun FTV-1 Vertical Mill, 9" x 42" table, 2 HP, DRO, power X & Y feeds, power drawbar, new approx. 2000
Bridgeport Vertical Tracer Mill, 9" x 60" table, (2) 1 HP milling heads, Tru-Trace hyd tracer, hyd table feed,
Brown & Sharpe No. 20 Universal Horizontal Mill with vertical head, new approx. 1970
SIP MP-3k Precision Jig Bore, 27" x 18" table, new approx. 1975
Easco Toolmaker 816 Ram Type EDM, 16" x 24" table, 3R tool holder, new 1980
Jet JRD-700 Radial Drill, 7.5" column, 28" arm, 2 HP, box table, new 1980
Powermatic 1150 Drill Press, new approx. 1980 - in storage
36" Blanchard No. 18 Rotary Surface Grinder, electromagnetic chuck, new 1953
K.O. Lee S618H, Hyd Surface Grinder, 6" x 18" magnetic chuck, new 1968
Hyd. Surface Grinder, unknown mfg. & model 8" x 24" magnetic chuck, new approx. 1970
Brierly ZB-25 Drill Grinder, mounted on cabinet with tooling, new 1970's
Cuttermaster HDT-30 Drill Grinder, mounted on cabinet with tooling, s/n 1477A
K.O. Lee BA960 Tool & Cutter Grinder, new early 1980's
Sunnen MBB-1660 Horiz Hone, manual, Sunnen tooling cabinet, new 1980's
Trinco 36 B/P Abrasive Blast Cabinet with media reclamation, New mid 1990's
DoALL C-260A Automatic Horiz. Band Saw, 10 1/4" x 12" capacity, power infeed table, new 1988
DoALL C-305A Automatic Horiz Band Saw, 12" x 12" capacity, New 2000 - not under power
Roll-In Unuiversal Band Saw, manual, 12" x 18" cap, New approx. 1980
DoALL ML-16 Vertical band Saw, 16" throat, blade shear, weld and grind, new 1960's
H-Frame Hydraulic Press, Mfg & Model unknown, approx. 50 ton, sliding ram & adjustable bed
20 Ton Carolina H-Frame Hyd. Press, s/n P20581, New 1980's
15 ton Rouselle 2E OBI Press, 12" x 16" bed, s/n Na, new approx. 1980 - in storage
Welding Equipment:
Miller Syncrowave 351 TIG Welding Power Supply, Miller coolant system, tanks, gauges and cables, New 1990's
Air Products 325 MIG Welding Power Supply, coolant system, tanks, gauges and cables, New 1980's
Lincoln AC-225-S Stick Welding Power Supply,
Moore FBG27HTT Heat Treat Furnace, 2300 deg F max temp
(2) steel round welding tables
Test and Inspection Equipment:
G&L Sheffield Cordax 1805 MEA Coordinate Measuring Machine, manual, PC DMIS software, PC, Renishaw TP1 touch probe, 1989
14" GenX 3414 Optical Comparator, analog, new 1982's
(2) GageMaster ID Gauges
Enco Brinnell Hardness Tester, analog
(2) Mitutoyo HeightMaster Height Gauges
72" x 48" Collins Precision Granite Surface Plate, single lip, steel stand
60" x 36" Granite Surface Plate - shop grade
Metrology equipment including calipers, micrometers, height gauges, sine plates, precision angles, small granite surface plates, bore gauges, pin & block gauge sets, precision bench centers.
Facilities and Rolling Stock:
5000lb World-Lift WFC-50C Forklift, LPG, triple mast, side shift, s/n TC01063, New approx. 2010
Rolling Gantry Crane, chain fall, approx. 1000lb cap.
Pittsburgh Engine Hoist
(2) Rolling Die Lifts
20 HP Quincy Reciprocating Air Compressor with tank, new mid 1980's
20 HP Air Service Reciprocating Air Compressor with tank, new mid 1980's
10 HP Reciprocating Air compressor with tank,
Lot of shop and office furniture and storage to include tool & storage cabinets, cantilever racks, heavy duty pallet racking, workbenches, desks, tables, chairs, stools & shelves, carbide grinders, pedestal grinders, belt & disc sanders, cut-off saws and hand held power tools, rotary tables, dividing heads, indexing heads, vises, angle plates & assorted part fixturing ,machining center & mill tool holders, ID & OD turning tool holders, chucks, collets, Lyndex spindle attachments, tapping heads, lathe tool posts & centers, and much more.
***Approved Rigger***
JMOR Machinery Movers - Masten Palmer - 817-913-4088
***Removal by Appointment Only***
TERMS and CONDITIONS of Auction:
Registration & Bidding:
Only one (1) Bidder per paddle number is allowed. The party whose information is provided at the time of registration is responsible for all purchases of made under that Bidder paddle number. Machinery Network Auctions, Inc. (MNA) reserves the right to refuse issuing a paddle number for any reason it believes necessary to protect the integrity of the bid.
Disclaimer & Acknowledgement:
MNA and seller expressly disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. These terms are merely meant to be representative; by registering for and/or bidding in this auction, you are expressly acknowledging and agreeing to these Terms as well as all of the Terms and Conditions in both the Bid Card and Auction Catalogue.
Payment:
All bidders are required to pay in full within 48 hours of invoice date – NO EXCEPTIONS
Removal:
Purchased lots will not be released until payment has been received in full. Wire transfers must clear in order for payment to be considered “received in full”