Filtered by:
- Lots with images only,
- Primary Category,
- Category
- List
- Grid
-
41 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-5-2, with Baldor 1750 RPM S/S
Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-5-2, with Baldor 1750 RPM S/S Clad Motor, New Cost Over $8,000, Less Than ...
Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-10-1, with Baldor 1750 RPM
Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-10-1, with Baldor 1750 RPM S/S Clad Motor, New Cost Over $8,000, Less Than...
Waukesha 30 hp Positive Displacement Pump, M/N 220U2, S/N 369823-04, with 4" Clamp Type S/S Head,
Waukesha 30 hp Positive Displacement Pump, M/N 220U2, S/N 369823-04, with 4" Clamp Type S/S Head, with 1755 RPM Motor, 230-460 Volts, 3 Phase, M...
APV 20 hp Centrifugal Pump, M/N PP 944-99, S/N 8V2, with Baldor 3520 RPM Motor, 230/460 Volts,
APV 20 hp Centrifugal Pump, M/N PP 944-99, S/N 8V2, with Baldor 3520 RPM Motor, 230/460 Volts, Mounted on S/S Portable Frame(IN#69008) (Located ...
APV S/S Ribbon Blender & Auger Feeder, S/N K-0784, with Aprox. 9" Dia. S/S Auger & Discharge, with
APV S/S Ribbon Blender & Auger Feeder, S/N K-0784, with Aprox. 9" Dia. S/S Auger & Discharge, with SEW 3.5/4.5 Drive, 1700 RPM, Mounted on S/S P...
OMVE S/S Carbo-Fill Carbonated Filler,with 2009 Pressure Reservoir, S/N 070911117, MAWP 58 PSI @ 176
OMVE S/S Carbo-Fill Carbonated Filler,with 2009 Pressure Reservoir, S/N 070911117, MAWP 58 PSI @ 176 F, MAEWP 15 PSI @ 176 F, with Allen-Bradley...
APV 3-Piston S/S Homogenizer/High Pressure Pump, M/N 1,800 G55-3B, S/N 20002410402, with 60 hp/1185 RPM Motor, 460 Volts, 3 Phase (NOTE: Head Ass...
S/S Jet Spray COP Traugh, with On Board Heat Exchanger, Overall Dims.: Aprox. 80" L x 38" W x 37"
S/S Jet Spray COP Traugh, with On Board Heat Exchanger, Overall Dims.: Aprox. 80" L x 38" W x 37" H Mounted on S/S Portable Frame (IN#68099)(L...
Aprox. 135 Gal. S/S Single Wall Rectangular Tank, with Side Mounted APV 3 hp Pump, 1755 RPM, 230/460
Aprox. 135 Gal. S/S Single Wall Rectangular Tank, with Side Mounted APV 3 hp Pump, 1755 RPM, 230/460 Volts, 3 Phase, with Aprox. 2" x 3" S/S Clam...
Damrow 10,000 gallon capacity refrigerated silo tank, 1.5 HP horizontal agitation. Approximate dimensions: 128” diameter x 20’ high. Note: tank ne...
FEMC U-Shape Conveyor, M/N 2217-102, S/N 8372, with Aprox. 7-1/2" W Plastic Belt with Guide Rails,
FEMC U-Shape Conveyor, M/N 2217-102, S/N 8372, with Aprox. 7-1/2" W Plastic Belt with Guide Rails, with SEW Drive, Mounted on S/S Frame (INV#709...
(2) Laughlin Straight Sections of S/S Conveyor, 86" L, with (1) Roll of Aprox. 12" W Plastic Conveyor Belt, with S/S Clad Motor, Overall Length ...
Nordson ProBlue 10 Glue Pot, Mounted on S/S Frame (IN#68091)(Located at the MDG Auction Showroom
Nordson ProBlue 10 Glue Pot, Mounted on S/S Frame (IN#68091)(Located at the MDG Auction Showroom in Pgh., PA) (Rigging, Loading & Site Management...
Blentech S/S Vacuum Tumbler, Model VT1-3000-S, S/N 970676 with Aprox. 8 ft. L x 67" W Tunnel
Blentech S/S Vacuum Tumbler, Model VT1-3000-S, S/N 970676 with Aprox. 8 ft. L x 67" W Tunnel Chamber, Mounted on S/S Frame including Door, Vacuu...
Sutorbilt 10 hp Rotary Positive Blower, M/N 5M-F, S/N 270538, with Baldor 1725 RPM Motor, 208-230/
Sutorbilt 10 hp Rotary Positive Blower, M/N 5M-F, S/N 270538, with Baldor 1725 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on Frame (IN#71771...
Sutorbilt 15 hp Rotary Positve Blower, M/N 5M-F, S/N 272078, with Baldor 1760 RPM Motor, 208-230/460
Sutorbilt 15 hp Rotary Positve Blower, M/N 5M-F, S/N 272078, with Baldor 1760 RPM Motor, 208-230/460 Volts, 3 Phase, Mounted on Frame (IN#71772)...
Commonwealth Electric Control Panel, Includes Allen-Bradley 7-Slot PLC, with Other Controls--See
Commonwealth Electric Control Panel, Includes Allen-Bradley 7-Slot PLC, with Other Controls--See Photographs (NOTE: Missing 3-Slots on PLC--See...
7.5 hp Centrifugal Pump,with Reliance 1760 RPM Motor, 208-230/460 Volts, 3 Phase (IN#71003)(
7.5 hp Centrifugal Pump,with Reliance 1760 RPM Motor, 208-230/460 Volts, 3 Phase (IN#71003)(LOCATED AT MDG AUCTION SHOWROOM--PGH., PA) (Rigging,...
Nordson Glue Pot,Unit #: 3100-1EA34, S/N AN98H32548, 200-240 Volts (INV#73282)(LOCATED AT MDG
Nordson Glue Pot,Unit #: 3100-1EA34, S/N AN98H32548, 200-240 Volts (INV#73282)(LOCATED AT MDG AUCTION SHOWROOM--PGH., PA) (Rigging, Handling & ...
Stokes 5 hp Microvac Pump,M/N 212H-11, S/N 203495S0, with Baldor 1725 RPM Motor, 208-230/460
Stokes 5 hp Microvac Pump,M/N 212H-11, S/N 203495S0, with Baldor 1725 RPM Motor, 208-230/460 Volts, 3 Phase (IN#66822)(LOCATED AT MDG AUCTION S...
Baldor 1.5 hp Pump,with 3450 RPM Motor, 208-230/460 Volts, 3 Phase(IN#70468) (LOCATED AT M. DAVIS
Baldor 1.5 hp Pump,with 3450 RPM Motor, 208-230/460 Volts, 3 Phase(IN#70468) (LOCATED AT M. DAVIS GROUP AUCTION SHOWROOM--PITTSBURGH, PA) (Riggi...
Laughlin S/S Section of Conveyor,with Straight Section & 90 Degree Turn, Overall Length: Aprox. 264"
Laughlin S/S Section of Conveyor,with Straight Section & 90 Degree Turn, Overall Length: Aprox. 264" L, with Aprox. 4-1/2" W Plastic Belt, with...
Lincoln Impinger Oven,M/N 1301, S/N 3011522, with Aprox. 17" L x 2-1/2" H Product Opening (INV#
Lincoln Impinger Oven,M/N 1301, S/N 3011522, with Aprox. 17" L x 2-1/2" H Product Opening (INV#66018) (LOCATED AT MDG AUCTION SHOWROOM--PGH., PA...
Schroder Visc-Rotor System, Type VRS System with (2) Units S/N 11/3839-1-173651 & 174575, SEW Motors, Control Panel, Mounted on S/S Frame (IN#7100...
Calkins 30 hp Hydraulic Pump,S/N 1-82984-0, with Baldor 1760 RPM Motor, with Hydraulic Lines (INV#
Calkins 30 hp Hydraulic Pump,S/N 1-82984-0, with Baldor 1760 RPM Motor, with Hydraulic Lines (INV#73293) (LOCATED AT MDG AUCTION SHOWROOM--PGH.,...
Triple Lane S/S Accumulation Conveyor,with (3) Plastic Conveyor Belts, 2-Aprox. 12" W Belts, 1-4-1/
Triple Lane S/S Accumulation Conveyor,with (3) Plastic Conveyor Belts, 2-Aprox. 12" W Belts, 1-4-1/2" W Belt, with S/S Guides, with (3) S/S Clad...
True 3-Door Refrigerator,with (3) Glass Hinge Glass Doors, M/N GDM-72F, S/N 11782970, 115/230 Volts,
True 3-Door Refrigerator,with (3) Glass Hinge Glass Doors, M/N GDM-72F, S/N 11782970, 115/230 Volts, 1 Phase, Overall Dims.: Aprox. 78" L x 31"...
Pfeifer Vacuum Controller, Type CL004, S/N 40108953 (Location: MDG Auction Showroom in Pittsburgh,
Pfeifer Vacuum Controller, Type CL004, S/N 40108953 (Location: MDG Auction Showroom in Pittsburgh, PA)(For Packaging & Loading Quote, Contact Pak ...
Z Configuration Portable S/S Conveyor System, Overall Dims.: Aprox. 12 ft 4" L x 30" & 75" H, with 8" W Plastic Belt with 8" Dividers, SEW Driv...
Z Configuration Portable S/S Conveyor System, Overall Dims.: Aprox. 12 ft 4" L x 30" & 75" H, with 8" W Plastic Belt with 8" Dividers, SEW Driv...
Double Wall Single Arm S/S Dough Mixer, with 15/60 hp Bottom Mounted Motor, 885/1775 RPMs, with On Board Hydraulic Pump System with S/S Reservoi...
Clark 4,150 lbs. Electric Sit-Down Forklift, M/N ECS25, S/N E357-0480-8970FB, 8,278 Hours, with 36 Volt Battery, 3-Stage Mast, Includes Exide 36 V...
Hinds-Bock 16-Head S/S Piston Filler, M/N 16P-02V, S/N 4537, with S/S Control Panel with Allen-Bradley MicroLogix 1000, Mounted on S/S Portable...
2012 Le Materiel Pera S/S Sifter, Type PRF600, S/N 105583, with PALL S/S Filter, Aprox. 21" L x 3-1/2" Dia., Sifter Dims.: Aprox. 24" L x 24" D...
Anets Triple Roll Sheeter, with (3) S/S Rolls, 1-Aprox. 21-1/2" L x 13" Dia., 1-Aprox. 22-1/4" L x 17" Dia., & 1-Aprox. 22" L x 4" Dia., with Pa...
S/S Tipper Tie Machine, Mounted on S/S Table with Onboard Vacuum Pump(IN#69324) (LOCATED AT M. DAVIS GROUP AUCTION SHOWROOM--PITTSBURGH, PA) (Ri...
2014 Bryan Boiler, M/N CLM270-S-150/15-FDG-RC, Input: 2700/1350, Output 2160, Nat'l BD #: 59717, with Hot Water Set & Burner (IN#70520)(Locate...
GEA 350 hp Screw Ammonia Compressor, with RAM 3574 RPM Motor, 460 Volts, 3 Phase, with GEA Micro III Control Display, with RAM Starter (IN#68989...
FES 250 hp Screw Ammonia Compressor, S/N 020475, NAT'L BD #: 12931, with Premium 3575 RPM Motor, 460 Volts, 3 Phase, with FES Micro III Control...
Frick 125 hp Screw Ammonia Air Compressor, NAT'L BD #: 98997, with RAM 3450 RPM Motor, 460 Volts, 3 Phase, with Frick RXB Plus Display (IN#6899...
Enclosed S/S Conveyor, Toshiba 0.5 hp S/S Clad Drive, with Internal Spray System, Aprox. 6 ft. L x
Enclosed S/S Conveyor, Toshiba 0.5 hp S/S Clad Drive, with Internal Spray System, Aprox. 6 ft. L x 22" W Belt x 25" H Opening, Mounted on S/S F...
-
41 item(s)/page