No Image
Auction closed
St., Pgh, Pennsylvania
Timed auction

Auction dates

  • Ended Dec 19, 2018 5:39pm ET (10:39pm GMT)

Auction details

Currency: USD
Buyer's premium: 18.00%
Sales tax: 7.00%

Venue address

2300 Palmer St., Pgh, Pennsylvania 15218 United States

Auction house

Add to favorites Ask a question phone_in_talk 412-521-5751
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
336 item(s)
  • List
  • Grid
  • 336 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

FMC/Stein 42" x 72", Batter Coating Applicator, Model APB-40, S/N 395, 3/4 HP Drive Motor, Includes 8 Gallon S/S Holding Tank, 2/1.5 S/S Centrifug...

2011 Skid Mounted 2-Tank S/S CIP System, with Aprox. 230 Gal. or 48" H x 38" W Tank, 140 Gal. or 46" H x 30" W Tank, 50" L x 8" W S/S Shell & Tube...

2013 T&C 100 Gallon Dome Top S/S Jacketed Tank, Sloped Bottom, S/N TC-7917-1, 316L S/S Interior, with Bottom and Side Sweep Agitator, 5HP Drive, 1...

Cherry Burrell ThermaFlex S/S Plate Heat Exchanger, Model 655-CBH, S/N: 95156XA with (26) S/S Plates, 150 psig, Total Dimensions Aprox. 56" L x 35...

APV Plate Heat Exchanger, Model R51, S/N (N/A) Includes (2) Dividers, (313) S/S AGC Plates, Also Includes New Gaskets, 102" L Tie Bar End to End, ...

Approx. (70) NEW AGC S/S Plate Heat Exchanger Plates W104) (NOTE: Subject to Piecemeal Bidding Item #121 to Item #128) Rigging/Handling Price: $50...

Tri-Clover 2 1/2" Clamp Type S/S Flow Diversion Valve (Works with HTST System) (W107) (NOTE: Subject to Piecemeal Bidding Item #121 to Item #128) ...

2" S/S Nested Folding Tube Approx. 90" L x 4' H Mounted on S/S Rack, note: Rack Damaged from Shipping (Works with HTST System) (W110) (NOTE: Subje...

GEA Diessel/ Anderson 3" Inline S.S Flow Meter Model: IZM1065D110 S/N: 0660745 Flow Rate 130 gpm with Digital Readout (works with HTST System) (W1...

Micro Motion 2" Clamp Type S/S Mass Flow Meter Model: DL200S226SU 921223 S/N: 154887 -240 degrees - 204 F Temp (Works with HTST System) (W105) (NO...

SOLARTRON MOBREY 1 1/2" Clamp Type S/S Liquid Density Transducer, Model: 7847PBAFAJTAAA S/N 471876 (Works with HTST System) (W106) (NOTE: Subject ...

48" L x 34" W x 12" H S/S Rectangular Balance Tank (6) 2" and 2 1/2" Connectors (Note: Missing Lid) (Works with HTST System) (W109) (NOTE: Subject...

Bulk Bid APV R51 HTST System Includes Lots 121 up to 128 Rigging/Handling Price: $1,500 *please note price does not include packaging, skidding, e...

2008 AGH Plate Heat Exchangers Model AR51SH-2, S/N 08229 includes (2) Dividers, (221) S/S Plates, 114" L Tie Bar End to End, Equipped with Hydraul...

2002 AGC Plate Heat Exchanger, Model AR51-H, S/N 02265 includes (2) Dividers, (423) S/S Plates, 124" L Tie Bar End to End, Equipped with Hydraulic...

2009 AGC Plate Heat Exchanger, Model AR51HS3, S/N 09123 Includes (370) S/S Plates, 173" L Tie Bar End to End, Equipped with Hydraulic Close and Se...

Approx. (200) AGC S/S Heat Exchanger Plates, ***Possibly NEW (W126) Rigging/Handling Price: $50 *please note price does not include packaging, ski...

Approx. (200) AGC S/S Heat Exchanger Plates, ***Possibly NEW (W127) Rigging/Handling Price: $50 *please note price does not include packaging, ski...

Approx. (240) AGC S/S Heat Exchanger Plates (W128) Rigging/Handling Price: $50 *please note price does not include packaging, skidding, etc. ...[...

Alfa Laval 2 1/2" Clamp Type S/S Flow Diversion Valve Set Model: 762TR-227M-2 1/2-316L-1-2 S/N: 764716 Includes Control Tops, (W111) Rigging/Handl...

Tri-Clover 2" Clamp Type S/S Flow Diversion Valve Model 762 With Control Top (Works with HTST System) (W112) Rigging/Handling Price: $50 *please n...

(2) Anderson Digital Controllers Differential Pressure Indicator Model: GB107OG097111 S/N: 0400565 Electronic Thermometer Model FD110 S/N: 0400585...

Single Tank Skid Mounted S/S CIP System, with 80 Gal. Insulated S/S Tank, 2010 Enerquip S/S Shell & Tube Heat Exchanger BN 9748, SN 12108, MAWP 15...

Skid Mounted S/S CIP System with Aprox. 150 Gal. or 38" H x 34" W S/S Tank, Enerquip 70" L x 8" W S/S Shell & Tube Heat Exchanger, Tri Clover 20 h...

Sani - Matic 2 - Tank Skid Mounted S/S CIP System, with 150 Gal (38" H x 34" W) S/S Tanks, Chromalox Immersion Heater, Tri Clover 5 hp Centrifugal...

75hp Frick Freon Screw Compressor, Compressor Head Model XJF120M, S/N 0339EE, Frame Model RXF 30 H, S/N 0285VFMNTHAA02, R22 Refrigerant, with RAM ...

NEW Rebuilt Head 2014 FES 250 hp Screw Ammonia Compressor, Frame #920167, Board #5840 with GEA Screw, Model 650, S/N 002 - Rebuilt #13159, Ram 356...

2011 Clayton Verticle Boiler System, Model E0-254-1-DZ, S/N 25047, Natural Gas Fired, Max Heat Input 9,920,000 BTU/HR, 460V 3 Phase, (Note: Missin...

Ingersoll Rand 200 hp Water Cooled Oil-Free Screw Air Compressor, Model Sierra-H200W, S/N TS3021U04291, 855 CFM Capacity, 125 psi, 460 V, 3 Phase ...

Ingersoll Rand 200 hp Water Cooled Oil-Free Screw Air Compressor, Model Sierra-H200W, S/N TS3026U04301, 855 CFM Capacity, 125 psi, 460 V, 3 Phase ...

Silvan 38"H x 15"W Verticle Air Receiver, Part #VFS14-3.8, BN 386015, MAWP 150 psi at 300 degrees F (W780) Rigging/Handling Price: $25 *please not...

Rietz Bepex, 57"W x 78"L S/S Creamer Paddle Blender, with 6" Diameter Shaft, with Ribbons, 10 hp SEW Drive Motor, 1740 rpm, 230/460V 3 Phase, Incl...

Rietz Bepex, 57"W x 78"L S/S Creamer Paddle Blender, with 6" Diameter Shaft, with Ribbons, 10 hp SEW Drive Motor, 1740 rpm, 230/460V 3 Phase, Incl...

Rietz Bepex, 57"W x 105"L S/S Creamer Paddle Blender, Model RC-80, S/N 8C-800030, with 6" Diameter Shaft, with Ribbons, 10 hp SEW Drive Motor, 174...

Approx 6,000 Gallon Dome Top, Cone Bottom, Jacketed S/S Mix Tank, with Side Sweep Agitator, Top Access Door, Spray Balls, Overall Dimensions Appro...

Approx 6,000 Gallon Dome Top, Cone Bottom, Jacketed S/S Mix Tank, with Side Sweep Agitator, Top Access Door, Spray Balls, (Note: Includes Drive, M...

Aprox 4,000 Gallon Dome Top, Cone Bottom, Jacketed S/S Mix Tank, Top Access Door, Bottom and Side Sweep, with Scrape Surface Agitator, with Baffle...

Aprox 4,000 Gallon Dome Top, Cone Bottom, Jacketed S/S Mix Tank, Top Access Door, Bottom and Side Sweep, with Scrape Surface Agitator, with Baffle...

Approx 500 Gallon, verticle S/S CIP Tank, with Top Access Door, Mounted on S/S Legs, Overall Dimensions 9'H x 46"W (W788) Rigging/Handling Price: ...

Cherry Burrel 250 Gal. Vertical Single Wall S/S Tank, with Cone Bottom with 4" Discharge Clamp Fitting, Open Top, Level Sensor, Includes Bridge Pl...

170 Gal S/S Tank, Single Wall, Hinged Lid, Mounted on S/S Legs, with Lightnin 1 hp / 1725 RPM Agitator with S/S Shaft, 208/230 V 3 Phase, Lumenite...

2012 Stainless Process Equipment Aprox. 500 Gal. Dome Top Dome Bottom Vertical S/S Pressurized Tank, SN S5782 with Top Acess 316L S/S Pressurized ...

2011 Chester-Jensen S/S Ammonia Plate Chiller, Size/Type B-8-01-4-32, S/N 1121-P, with 8 Plates, Overall Dimensions 8'L x 55"W x 89"H, (W789) Rigg...

Approx 200 Gallons, Skid Mounted S/S CIP System, with Feldmeier Hinged Lid S/S Tank, S/N 5094009, S/S Shell and Tube Heat Exchanger, 4'L x 6"W, Fr...

Moline 32" W 2 - Pin Vertical S/S Dough Sheeter, Model 10-32VR, SN 05-J 219172, with Adjustable Rollers, (3) Drive Motors, Includes 9 ft L In-Feed...

Moline 32" S/S Dough Stamper, Model SCSU-32, SN 05-J 219162, with Drive Motors, S/S Enclosure, 230V 3 Phase (W413) Rigging/Handling Price: $250 *p...

Moline 32" S/S Dough Stamper, Model SCSU-32, SN 05-J 219161, with Drive Motors, S/S Enclosure, 230V 3 Phase (W414) Rigging/Handling Price: $250 *p...

Moline 32" S/S Dough Stamper, Model SCSU-32, SN 05-J 219163, with Drive Motors, S/S Enclosure, 230V 3 Phase (W412) Rigging/Handling Price: $250 *p...

Moline 32" S/S Dough Ultrasonic Guillotine, Model SCSU-32, SN 05-J 219157, with Drive Motors, 230V 3 Phase (W415) Rigging/Handling Price: $250 *pl...

Barry Wehmiller / Thiele / Forpak Sheet Inserter / Dough Stacker, Model - Reciprocating Placer, SN T7300A414, 4 - Lane Design, with 38" W Intralux...

Moline 4 pcs @ 31 ft S/S Dough Sheeter Out-Feed S/S Conveyor System with 32" W Intralux Belting, with Drive Section Model EDVTU-32R, SN 05-J 21913...

Moline 32" W Conveyor Mountable 5 - Blade S/S Dough Strip Cutter, Model PCA-RL-32R, SN 05-J 219165 (W417) Rigging/Handling Price: $200 *please not...

Sheeting Line S/S Control Panel, with Allen Bradley Panel View 1,000 Touch Pad Display (W791) Rigging/Handling Price: $75 *please note price does ...

Sheeting Line S/S Control Panels, with (2) Allen Bradley Disconnect Switches (W792) Rigging/Handling Price: $75 *please note price does not includ...

Moline Sheeting Line S/S Control Panel, with (2) Branson Servo Drives, Model 2000P, with Allen Bradley Flex I/O Controls, Panel 30"W x 37"H x 16" ...

Sheeting Line S/S Control Panel, with Allen Bradley Panel View 1,000 Touch Pad Display (W794) Rigging/Handling Price: $75 *please note price does ...

80"L x 12"W S/S Augers, Includes Rack (Used for Auger Pump in Bakery) (W795) Rigging/Handling Price: $75 *please note price does not include packa...

Mepaco 56" L x 48" W x 28" S/S Troughswith Pneumatic Bottom Slide Drops, 61" L Fork Span (W434) Rigging/Handling Price: $75 *please note price doe...

45"W x 45"L x 34"D Portable S/S Tote, with Top Access Door, 14"W x 18"L Bottom Drop Opening, Mounted on Steel Fork Attacement, with Casters (W796)...

Meto Corp. 12'H Pneumatic Lift Station, Model M2310-10, S/N 6904, 150kg/330lb (W797) Rigging/Handling Price: $300 *please note price does not incl...

Loading...Loading...
  • 336 item(s)
    /page

Recently Viewed Lots