S/S Agitator with 5.5 HP Motor, 3470 RPM

S/S Agitators, 1-Sonie Typhoon Agitator, M/N T66-50V, S/N M-0094, 3-Prop Design, 110V, and 1- Lightnin Agitator, M/N XDQ-30, S/N R9870234200501, w...

Lightnin Agitator, M/N XJDS-65AM, S/N 82/A98002-02, with 1.17 HP Motor, 1725/1425 RPM, with 3-Prop S/S Agitator End (NOTE: Missing Shaft As Photo...

Eastern Agitator, M/N E-2V, S/N 8558, with 3-Prop Design, Vice Type Vessel Mount

Lightnin Agitator with Reliance Spare Agitation Drive, Agitator S/N X-123621, with 1/15 HP, 1625 RPM, Reliance Drive, Size: SM16F, 1750 RPM

Lightnin Agitators, M/N XJSS-30 and XJDS-65AM, S/N RO2402023-01 and 01/5631672, with Motors

Lightnin Agitators, M/N (3) NC-4 AND (1) NC-1, S/N 80/926475; 80/801222; 7906695; 7906694, with Vice Type Vessel Mount

Tank Agitators, 1-Lightnin Mixco Batch Mixer, 1-Mix More, 2-Lightnins

Tank Agitators, 1-Mix More with Baldor Motor, 1-Eastern with Reliance Motor

Copper Heat Exchanger Tube Bundle, Aprox. 50" L x 14" Dia.

Alpha Laval Shell and Tube Heat Exchanger, M/N 6x3, S/N HC5969SCN, 300 PSI @ 300 Degrees F, 250 PSI @ 300 Degrees F, S/N HC5969SC10, Aprox. 26"L x...

Contherm Corp. Heat Exchanger Tubes, Tested at 450 PSIG, Aprox. 72"L x 11" Dia.

316L Heat Exchanger Tube Bundle, Aprox. 57" L x 8" Dia.

S/S Shell and Tube Heat Exchanger, 1 1/2" Clamp Type, Aprox. 39" L x 10" Dia.

1-AMETEK Shell and Tube Heat Exchanger, Size 3-X-24, Shell: 240 PSIG @ 600 Degrees F, Tube: 200 PSIG @ 600 Degrees F, S/N WL-30727, Tube 200 PSI...

Teledyne Readco 4" Extruder Covers, 150 PSI and 450 Degrees F, S/N 5631987

Fisher Actuator Valve, Size: 1 1/2", S/N 12180814, Rating CL250B

Logical Machines S/S Vibratory Conveyor with Hopper, with Logical II Controller, S/S Hopper, Aprox. 22 1/2" x 24", Mounted on Portable Frame

FMC Vibratory Conveyor with S/S Hopper, M/N DAF 2000, S/N 1649, Mounted on S/S Skid

Vibratory Feeder with Hopper, Mounted on S/S Frame, Hopper 14" Dia.

Omega Vibratory Disc Feeder, M/N 23-02, S/N OD-2779

Vibracraft Vibratory Spiral, S/N 1997, Mounted on Frame

S/S Shaker Deck , Aprox. 67"L x 19"W x 4" D, Mounted on S/S Frame

2007 Tiefenthaler S/S Power Feed Hopper with Pin Die, M/N T1239, S/N 070122T1983, Hopper Dims.: 39"L x 12"W x 17"D, Die Dims.: 33" Dia., with Br...

S/S Power Feed Hopper, with Additional Hopper, and Roller Hopper, Feed Hopper Dims.: 33"L x 18"W x 26" D, Roller Hopper Dims.: Aprox. 35"L x 8"D

Nutripure Ultravoilet Sanitary Conditions, Part #: SC-24, Replacement Lamp #: S24T6, Aprox. 48"L x 10" Dia.

{ Group of lots: 300, 301, 302 } 3 HP Vacuum Pump, Type FN100L, 220V

{ Group of lots: 300, 301, 302 } Hydrovana 1 HP Vacuum Pump, 220V

{ Group of lots: 300, 301, 302 } Parker Hannifin Zenith 1/2 HP Pump, M/N 61844743-001, S/N 6184743, 8/18RPM

Tri-Flo 1/2 HP Centrifugal Pump, M/N SP114MD-S, S/N X0747, with 1725 RPM

Tri-Flo 1/4 and 3/4 HP Centrifugal Pumps, M/N J9073 and S04130, S/N C114MD56T-S and C114MD56T-S-2-36, with Reliance 1725 and 3450 RPM Motors

IKA Dispak-Reactor, Model DR3-6A, S/N 00666 with Reliance 7.5 hp Drive Only, 3520 RPM, 230/460 V, 3 Phase and AB Controller, Mounted on S/S Portab...

Unimont 20 HP Centrifugal Pump, M/N 2.5C, S/N 082103, 250 GPM, 230/460 V, 3525 RPM

Worthington 5 HP Pump, M/N D5801 with Siemens 3455 RPM Motor, Mounted on Skid

Universal 2 HP Blower, with Reeves Drive, Spare Head, 55/550 RPM, 1 1/2" Clamp Type, Mounted on S/S Skid

Gear Drives, 1-10HP/1740RPM and 1-5 HP/1680RPM

Motors and Drives, Ranging from 1 HP-7.5 HP, 1-with Starter

Rietschle Aprox. 3 HP Vacuum Pump, Type: KF 101 [01], 1700 RPM

Electrostat 20 HP Motor,M//n 3660F620000, 240 V, 1150 RPM

{ Group of lots: 313, 314 } Mount Type Centrifugal Pump, Mounted on Skid

{ Group of lots: 313, 314 } SEW 20 HP Gear Drive, 1760 RPM

Pallet of Assorted Lightnin Agitators, with Vise Type Vessel Mount, 1-with Variable Speed Control

Skid Mounted Centrifugal Pump, S/N WM103299, Square D Starter with SEW Drive

Ametek 2.8/5HP Blower System with Air Filtration, 2850/3450 RPM

S/S Spray and Wash Station, Opening Dims.: Aprox. 35"L x 9 3/4" H, with Discharge Trough, 33"L x 37"W x 20"D, on S/S Frame with Square D Safety S...

S/S Portable Auger Conveyor, Discharge Dims.: 6" Dia. X 24" Off Ground, with 0.75 HP Baldor Motor, 1750 RPM, 84" Long

Adhesive Tape Sealing Machine, M/N CS88, 110 V, 50 Hz, 2 x 90W, Mounted on Portable Frame, Top/Bottom Sealer, 21" Wide Inbound/Discharge Roller Co...

S/S UV Conveyor Tunnel, Mounted on Portable S/S Frame, 4 1/2" W Conveyor with Accumlation Station, Dual Lighting Station, Aprox. 78" L x 34 1/2"W ...

Intec 30 hp Portable Variable Speed Controller with Toshiba Transistor Inverter, TOSVERT-130 G2, High Performance Digital Series

Modern Process Equipment Mill, with S/S Hopper, Mounted on Steel Frame

(2) Hassia Parts Consisting of Unwind Stand and Film Hydrogen Peroxide Treat System with Film Treating Tank, Controls including Yaskawa Servopak S...

S/S Storage Tank, Mounted in Steel Framing, Dims.: 46"L x 36" Dia., with S/S Ball Valve Discharge

FPEC Aprox. 72" L x 33" W S/S Platform Lift, S/N 1975

Capway Systems Dough Cutter System, Job #1953 with Aprox. 6" Wide Belt and Control Panel with (2) Allen-Bradley VFD's

Loma Metal Detector, Model IQ2, S/N 37S832, Mounted on S/S Stand (Located in Utah)

Loma Metal Detector, Model IQ2, S/N 37S833H, Mounted on S/S Stand (Located in Utah)

Mettler Toledo Safeline Metal Detector, S/N 45745 (Located in Utah)

Taylor-Wharton XL-160 S/S Nitrgen Tank, Dims.: 58" Tall x 24" Wide, Includes Portable Cart (NOTE: Replace Pressure Release Valve Before Use)

XenoROL Skate Conveyor Systems, Aprox. 140' x 21" Wide, Legs and (1) Drive Included (Blue Conveyor) (TAG29)

Automated Skate Conveyor Systems, Aprox. 78' x 21" wide with Legs and One Curved Section (NOTE: On Pallets, Ready for Transport) (Green Sections) ...