S/S Smoke House, Gas, Includes Smoke Generator and (1) S/S Rack, External Dimensions: 69" x 76" x 94 1/2" (+14" H w/ Motor Installed), Interior Di...

S/S HOLDING TANK APPROX 80 GALLON VESSEL 29"X36" ON LEGS (LOCATED IN ILLINOIS)***LDP***

S/S HOLDING TANK APPROX 60 GALLONG 24X48 CONE BOTTOM (LOCATED IN ILLINOIS)***LDP***

VIKING K125 PUMP HEAD (LOCATED IN ILLINOIS)***LDP***

9' 8"X2' INCLINE ROLLER CONVEYOR WITH 3 ADD SECTIONS ROLLER CONVEYOR (LOCATED IN ILLINOIS)***LDP***

2-COMPARTMENT @ 50 GALLON  SQUARE HOLDING TANK  (LOCATED IN ILLINOIS)***LDP***

ALL S/S CASE WASHER 17'X29" (LOCATED IN ILLINOIS)***LDP***

3" 4 PASS S/S HOLDING TUBE (LOCATED IN ILLINOIS)***LDP***

(3) WATER SOFTENING TANK (LOCATED IN ILLINOIS)***LDP***

MUELLER 2500 GALLON 25'X6' FINISHING TABLE, JACKETED, 3" DRAIN (LOCATED IN ILLINOIS)***LDP***

45' GREAT DANE REEFER TRAILER WITH THERMOKING SBIII MAX + (LOCATED IN ILLINOIS)***LDP***

CB 3/4 HP POSITIVE DISAPLACEMENT PUMP, 1725 RPM, ON STAND WITH CASTERS (LOCATED IN ILLINOIS)***LDP***

GREAT LAKES 708E-27 S/N BO199 FLOW WRAPPER WITH SHRINK TUNNEL (LOCATED IN ILLINOIS)***LDP***

27"X27" CONVEYOR (LOCATED IN ILLINOIS)***LDP***

5 HP BLOWER FAN (LOCATED IN ILLINOIS)***LDP***

GREAT LAKES 708E-27 S/N BO286 OVER WRAPPER WITH SHRINK TUNNEL, 708E-27 S/N BO286, OUTFEED ROLLER CONVEYOR (LOCATED IN ILLINOIS)***LDP***

3 HEAD S/S PISTON FILLER WITH CAPPER, PREVIOUSLY USED TO FILL MILK AND DRINKABLE YOGURT PRODUCTS (KEFIR) (LOCATED IN ILLINOIS)***LDP***

BUSCH 40 CFM VAC PUMP (LOCATED IN ILLINOIS)***LDP***

BUSCH 40 CFM VAC PUMP (LOCATED IN ILLINOIS)***LDP***

(3) VIDEO JET DATE CODER, PARTS ONLY (LOCATED IN ILLINOIS)***LDP***

(11) HYDRAULIC CYLANDERS (LOCATED IN ILLINOIS)***LDP***

PACKAGE FREON CHILLER WITH COPELAND COMP (LOCATED IN ILLINOIS)***LDP***

Glatt Inox Granulator - M# Inox, Slow Speed Granulating Mixer With Solvent Recovery.  As Shown In Photo's (LOCATED IN NEW YORK)***NYINC***

West Capper - M# RW500, S# 158, 115 Volt, 60 Hz, 1 Phase.  Comes With Parts For 3,5,10,20,30 & 50 ML Bottles.  As Shown In Photo's (LOCATED IN NEW...

Lodige 50 Liter Mixer - M# FM50, S# D-33102, 50 Liter Capacity, Jacket 6, Working Pressure .5 Bar, Working Temp 100 Degc.  As Shown In Photo's (LO...

Nica Extruder M# E-220, S# 623-007, 3Hp Feeder Motor, 5 HP Extrusion Head Motor.  460 Volt, 3 Phase. Comes With Manual.  As Shown In Photo's (LOCA...

Walker 10g Jacketed Tank, S# 00113, 316 Stainless Steel, 90 PSI @ 300 Degrees,  On Casters, 2002 Mfg. Date.(LOCATED IN NEW YORK)***NYINC***

Patterson Kelley 2 CFT Processor, S# 278069, Shell Jacket: 30 PSI @ 250Degrees, Shell Driven by 3/4HP, 3 PH, 60 Hz, 230/460Volt Motor, Bar Motor: ...

Donaldson Torit Dust Collector, M# DFT2-4, S# 1845697-1, Blower: 7.5Hp, 200V, 3 Phase, 60 Cycles(LOCATED IN NEW YORK)***NYINC*** ...[more]

Donaldson Torit Dust Collector, M# UMA 150, S# IG772944, Blower 5HP, 460 Volt, 60 Cycles, 3 Phase, 3600 RPM Motor, With Slide Out Dust Bin.(LOCATE...