Filtered by:
- Show only bulk lots
- List
- Grid
-
765 item(s)/page
Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.
(8) MEAS Measurement Specialties Inc. MSP-300 Pressure Sensors (4) P/N 2000264 & (4) 2000207 as a
(8) MEAS Measurement Specialties Inc. MSP-300 Pressure Sensors (4) P/N 2000264 & (4) 2000207 as a lot
6 New 15 oz. spray cans of Rust-Oleum Industrial Safety Yellow Spray Paint.
6 New 15 oz. spray cans of Rust-Oleum Industrial Safety Yellow Spray Paint.
Bimba 12" Air Ball Bushing Slide.Model TE-1712-EB1
Palnut Organized Kit of Self-Threading and Zip-Twist Nuts. Complete. Never Used.
Lot of 3 - 8" Forged Steel clamps. Made in the USA.No cracks or repairs.
Radiator Miser Professional Test Kit. Drain, Fill and Pressure Test Hot Vehicle. New, Never Used.
Radiator Miser Professional Test Kit. Drain, Fill and Pressure Test Hot Vehicle. New, Never Used.
Lot - 400 Large Black Nylon Cable Ties / Tie Wraps / Zip Ties. New
Lot of 4,000 Cardboard Box Staples. 1-1/4"Wide x 5/8" Legs. New
Hi-Temp Heat Gun on Stand. Heats to 750 Deg. F.Tested. Works.
Lot of 3 - Deep Throat DE-STA-CO Adjustable Clamps.
Lot of 15 Knobs, Cranks and Handles.
Lot of 8 Skill & Deming Drills with 1/2" shanks. 9/16" to 1" in diameter. Appear unused.
Lot - Pin Vise Set, Easy Out Set, Thread Gage Set & Small hand held chuck.
Lot - Cotter Pin Set and Roll Pin Set.
Pair of Carbide 1" Ball Nose End Mill Cutters. New, Never Used.
Lot - 2"x2" Hitch with 2-5/16" Ball. 5" Rise or 4" Drop, Solid 2"x2" Hitch, Turnbuckles, Lug
Lot - 2"x2" Hitch with 2-5/16" Ball. 5" Rise or 4" Drop, Solid 2"x2" Hitch, Turnbuckles, Lug Wrench & Hitch Pins.
14" x 18" Cast Iron surface plate and 4" x 4" x 8", 43 lb. Solid steel block. Both were used to cold
14" x 18" Cast Iron surface plate and 4" x 4" x 8", 43 lb. Solid steel block. Both were used to cold form brackets and parts.
Pair of Vises with a heavy duty clamp. 6" Bridgeport Vise and 5" Yost Vise. Both work. Dirty with
Pair of Vises with a heavy duty clamp. 6" Bridgeport Vise and 5" Yost Vise. Both work. Dirty with rust.
Heavy Duty Shop Cart with 4-1/2" Casters, Lower Shelf & 1/4" Steel Top: 34" Long x 16" Deep x 29"
Heavy Duty Shop Cart with 4-1/2" Casters, Lower Shelf & 1/4" Steel Top: 34" Long x 16" Deep x 29" High.
Encon Portable Emergency Eye Wash Station. Used.
Lot of 4 Anti-Fatigue Mats. Used.
Orange Panel Cart for Sheet Stock, Plywood or Drywall. Cart is 48" Long x 23" Wide x 45-1/2" High
Orange Panel Cart for Sheet Stock, Plywood or Drywall. Cart is 48" Long x 23" Wide x 45-1/2" High
Green Panel Cart for Sheet Stock, Plywood or Drywall. Cart is 48" Long x 23" Wide x 45-1/2" High.
Green Panel Cart for Sheet Stock, Plywood or Drywall. Cart is 48" Long x 23" Wide x 45-1/2" High.
Safety Belt with double side rings and two lanyards.
Safety Belt with single back ring and lanyard.
4 Section Adjustable Ladder. Can be locked into: 1) A-frame, 6 ft. ladder, 2) Scaffold, 40" high, or
4 Section Adjustable Ladder. Can be locked into: 1) A-frame, 6 ft. ladder, 2) Scaffold, 40" high, or 3) A straight 12 ft. - 6" ladder. Used.
Werner Aluminum Pick. Adjusts from 8 ft. long to 13 ft. long. Rated at 250 lbs. Locks in 1 ft.
Werner Aluminum Pick. Adjusts from 8 ft. long to 13 ft. long. Rated at 250 lbs. Locks in 1 ft. increments. Good Condition.
Wesco 1,000 lb. Hydraulic Die Lift. The 24" x 24" platform raises from 6" to 64". Good Condition.
Wesco 1,000 lb. Hydraulic Die Lift. The 24" x 24" platform raises from 6" to 64". Good Condition.
Lot - Pair of Ratchet Tie-Down Straps, Pair of Car Dolly Wheel Tie-Down Straps & a 27 ft. x 2"
Lot - Pair of Ratchet Tie-Down Straps, Pair of Car Dolly Wheel Tie-Down Straps & a 27 ft. x 2" Ratchet Strap. Used.
Custom 6 ft. x 10 ft. Trailer. 3500 lb. GVWR, Aluminum Sides, Front & Tailgate Ramp, Inside aluminum
Custom 6 ft. x 10 ft. Trailer. 3500 lb. GVWR, Aluminum Sides, Front & Tailgate Ramp, Inside aluminum panels, Rubber Conveyor Belt on Bed, 50" Bulk...
5" 5C LATHE SPINDLE NOSE PLAIN BACK
LOT OF HSS AND CARBIDE INSERT BALL NOSE CUTTERS
LOT OF 3" X 3/8" X 1" CARBIDE TIPPED VEE GROOVE CUTTERS
SOLID SQUARE AND MAG BASE INDICATOR HOLDER
LOT OF CARBIDE INSERT CUTTERS
LOT OF CARBIDE INSERT CUTTERS
LOT OF EXTENDED LENGTH CARBIDE INSERT CUTTERS
LOT OF 4 SMALL BALL NOSE CARBIDE INSERT CUTTERS
LOT OF 3 INGERSOLL 3" FACEMILLS
LOT OF 3 INGERSOLL 3" FACEMILLS
LOT OF 3 2" CARBIDE INSERT CUTTERS
LOT OF 4 VARIOUS DIAMETER FACEMILLS
LOT OF 2 NEW FABMET 2-1/2"CARBIDE INSERT FACEMILLS
LOT OF 6 NEW WIDIA EXTENDED LENGTH CARBIDE INSERT CUTTERS
LOT OF 3 NEW THROUGH THE TOOL COLLANT CARBIDE INSERT DRILLS CENTER CUTTING
LOT OF 3 NEW THROUGH THE TOOL COLLANT CARBIDE INSERT DRILLS CENTER CUTTING
LOT OF 3 NEW THROUGH THE TOOL COLLANT CARBIDE INSERT DRILLS CENTER CUTTING
LOT OF 3 NEW THROUGH THE TOOL COLLANT CARBIDE INSERT DRILLS CENTER CUTTING
LOT OF 3 NEW THROUGH THE TOOL COLLANT CARBIDE INSERT DRILLS CENTER CUTTING
LOT OF 3 NEW THROUGH THE TOOL COOLANT CARBIDE TIPPED DRILLS
CARBOLOY CARBIDE INSERT DRILL THROUGHT THE TOOL COOLANT
(2) CARBIDE INSERT THROUGHT THE TOOL COOLANT DRILLS, (1) CARBIDE TIPPED
(20) PACKS OF CARBIDE DRILL TIPS, MOST HAVE 2 INSERTS SOME HAVE 1
-
765 item(s)/page