Maintenance Room Cabinet, 12 drawers (Socket Head Cap Screws, Socket Head Cap Screws, Socket Head Cap Screws, Snap Rings, Roll Pins/E-Clips, Cotte...

Maintenance Room Cabinet, 10 drawers (Torx Bits/Grinding Stones, O-Rings, O-Riings, Std. Nuts/Bolts, Blow Guns/Greenlee Parts, Hooks, BLANK, Spann...

Maintenance Room Cabinet, 6 drawers (Safety Latches, Hilti Bolts & Drop-Ins, Hilti Bolts & Drop-Ins, Locktite/Silicone/Grease, Misc. Taps, H Taps/...

Maintenance Room Cabinet, 9 drawers, top storage compartment with flip top (BLANK, Taper Pin Reamers, Machine Reamers, Taper Pins, Keystock, Bandi...

Maintenance Room Cabinet, 6 drawers (Structural Reamers, Adjustable Reamers, the rest BLANK) Note: Some content in drawers (LOCATION: 3603 Melva S...

Four Kennedy 7 Drawer Tool Cabinets, Connected, with Contents (Inspections Tools, Dies, Drill Bits, etc.) (LOCATION: 3603 Melva Street, Houston TX...

8" 3-Jaw Hartford Special Super Spacer Index Table, 8" dia. 3-jaw chuck, non-cumulative indexing error: 0° 0'40" (0.00097" at 10" dia.), 24-notch ...

9.5" 3-Jaw Chuck, 3" through hole, type L mount, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

12.25" 3-Jaw Whiton Machine Co. Chuck, 3.5" through hole, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

12.5" 3-Jaw Bison Chuck, 4.25" through hole, camlock 6 - 1" pin (D1-8), S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

12.5" 3-Jaw Bison Chuck, 4" through hole, camlock 6 - 1" pin (D1-8), S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

10" 4-Jaw Cushman Chuck, 2.5" through hole, threaded back, S/N 1014CE3 (LOCATION: 3603 Melva Street, Houston TX 77020)

6" 3-Jaw Horton Chuck, 1" through hole, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

7.5" 3-Jaw Buck Chuck, 2" through hole, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8.25" 3-Jaw Chuck, 2.375" through hole, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

10" 3-Jaw Chuck, 3" through hole, no jaws, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8" 3-Jaw Chuck, 2" through hole, threaded back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8" 3-Jaw Chuck, 2" through hole, threaded back, no jaws, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

5" 3-Jaw Chuck, 1.25" through hole, flat back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8.25" 3-Jaw Chuck, 2.25" through hole, flat back, missing 1 jaw, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8.25" 3-Jaw Chuck on 10-5/8" Base Plate, 2-3/8" through hole, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

8.25" 3-Jaw Chuck on 10-5/8" Base Plate, 2-3/8" through hole, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

7" Collet Chuck, 1/2" collet, camlock back, S/N NA (LOCATION: 3603 Melva Street, Houston TX 77020)

6" x 8" Tilting Angle Plate with 6" x 8" base with 3 T-slots (LOCATION: 3603 Melva Street, Houston TX 77020)

Lot of 3 angle Plates, (1) 5" x 5", (1) 6" x 6", (1) 6" x 8" (LOCATION: 3603 Melva Street, Houston TX 77020)

12.25" 3-Jaw Chuck, 4" through hole, flat back (LOCATION: 3603 Melva Street, Houston TX 77020)

8" Swivel Base for Machine Vise (LOCATION: 3603 Melva Street, Houston TX 77020)

Hammond Model CB-77BW Chip Breaking & Cup Wheel Grinder, 3450 rpm spindle speeds, 1 hp motor, Chip Breaker Side: any angle vise, vise jaws accommo...

Jack Mill Machine Tools Model HDG-40 Universal Tool & Cutter Grinder, grinding wheel speeds (3) 2600/3700/6200 rpm, 1 hp motor, adj. height spindl...

Cincinnati No. 2 Tool & Cutter Grinder, 10" swing over table, 5" x 36" table, 16" table long. trvl, 10" cross trvl, 180 deg. table swivel, 5" tape...

Brown & Sharpe Model 2B Reciprocating Table Surface Grinder, 8" x 46" table, 6" x 18" electro-magnetic chuck, 20" table long. trvl, 6.5" cross trv...

Abrasive Model 1-1/2 Manual Reciprocating Table Surface Grinder, 10" x 15" electro-magnetic chuck, 18" table long. trvl. 11" cross trvl, 12" vert....

16" x 60" Summit Model 16X60 Engine Lathe, 18" swing over bed, 9.5" over cross slide, 26" in gap, 15" gap length, 60" centers, 24 spindle speeds, ...

20" x 80" Summit Model 20X80B Engine Lathe, 20.25" swing over bed, 11.8" over cross slide, 27.6" in gap, 80" centers, 15 spindle speeds, 11.5 - 14...

14" x 44" LeBlond Regal Engine Lathe, 14" swing over bed, 7" over cross slide, 44" centers, 30 - 1200 rpm spindle speeds, 1.5" spindle bore, 0.001...

28" x 40" VDF Boehringer Model V5 Engine Lathe, 28" swing over bed, 39.3" centers, 18 spindle speeds, 11.5 - 560 rpm, 10 hp, 4.75" spindle bore, A...

26" x 118" Dean, Smith & Grace Model 25P Hollow Spindle Lathe, 26.25" swing over bed, 16" over carriage, 46" in gap, 118" centers, 4.2 - 290 rpm, ...

Bridgeport-Romi EZ Path II CNC Lathe, New 1996, 19.6" swing over bed, 9.9" over cross slide, 39.7" centers, 9.84" center ht., 10" X trvl, 39.3" Z ...

Axelson Deep Hole Drilling Machine, 27.5" swing over bed, 30' bed length, 144" max. drilling depth, 6" max. hole dia., 30 hp headstock motor, 6 - ...

63" Vanguard CNC Vertical Boring Mill, new 2009, 63" built in 4 jaw chuck., 78.7" swing, 78.7" turning dia., 63" turning ht., 17,600 table load ca...

60" Giddings & Lewis CNC Vertical Boring Mill, new 1982, 60" table dia., 4-jaw comb. Ind./Univ. chuck, 72" swing, 60" under rail, 68" under turret...

48" Giddings & Lewis CNC Vertical Boring Mill, new 1984, 48" table dia., 4-jaw chuck, 60" swing, 12" - 60" under rail, 48" under tool holder, 48" ...

8' 19" Cincinnati Bickford Super Service Radial Arm Drill, new 1960, 96" arm length, 72" under arm, 8 - 1000 rpm spindle speeds, 20 hp, No. 6 Mors...

3000 Lb. Aronson Model SHD30A Adjustable Height Tilt and Rotate Welding Positioner, 36" x 36" table, 4 radial slots, 12" gravity center, 12" eccen...

Lodge & Shipley Engine Lathe, 24" swing, 144" bed length, 21" 4-jaw front and rear chucks, 8-9/16" spindle bore, 24 spindle speeds, 8 - 451 rpm, t...

Lodge & Shipley 25" Standard Engine Lathe, 24" swing, 144" bed length, 21" 4-jaw front and rear chucks, 8-7/8" spindle bore, threading, taper atta...

Lot of Tooling for Lodge & Shipley Lathes, tool holders, boribng bars, etc. (LOCATION: 4214 Bluebonnet Drive, Houston, TX 77053) ...[more]

12" 3-Jaw Chuck and Tailstock Center (LOCATION: 4214 Bluebonnet Drive, Houston, TX 77053)

Hardband Unit, new 2014, with 600 Volt Power Unit, 9" spindle bore, powered by Miller Big Blue 600 Welder, with Heavy Duty Tubular Conveyance Syst...

Lot of (3) 3-Jaw Chucks, (1) 12" 3-jaw, threaded back, (1) 12" 3-jaw, threaded back, missing top jaws, (1) 12.25" 3-jaw, flat back (LOCATION: 4214...

2,000 Lb. Aronson Model HD20A-PTVR2 Adjustabel height Welding Positioner / Pipe Positioner, 2000 lb. cap., 6" gravity center, 6" eccentricity, 0.0...

2,000 Lb. Aronson Model HD20A-PTVR2 Adjustabel height Welding Positioner / Pipe Positioner, 2000 lb. cap., 6" gravity center, 6" eccentricity, 0.0...

Powermatic Model 66 Bench Grinder with Torit Dust Collector, 3/4 hp motor, 5" dia. grinding wheel (LH), 7" dia. grinding wheel (RH), cat. #2100-24...

Black & Decker Model CB Heavy Duty Double End Tool Grinder, 1 hp motor, 1500/1800 rpm (220V/440V), 9" dia. grinding wheel (LH), 8" dia. grinding w...

Standard Electric Model 100 Double End Tool Grinder with Dust Extractor, type: 24FAS, 2 hp motor (220V/3P/60Hz/5.4A), 1750 rpm, 8" dia. grinding ...

16" Tabor Model CR-10-B-16-V4sp Split Table Abrasive Cut-Off Saw, U.S. Navy surplus, 16" blade dia., 10 hp motor, split table, 18" x 26" each, 1 T...

4' 11" Yoshida Model YRD-1000E Radial Arm Drill, 47" arm length, 11" dia. col., 39" head trvl on arm, 200 - 1800 rpm spindle speeds, 0.002 - 0.040...

Lot of 2 Dead Centers, 2" dia. x 10.5" length (LOCATION: 3603 Melva Street, Houston TX 77020)

Lot of 2 Dead Centers, 2" dia. x 10.5" length (LOCATION: 3603 Melva Street, Houston TX 77020)

Lot of 2 Dead Centers, 2" dia. x 10.5" length (LOCATION: 3603 Melva Street, Houston TX 77020)