(2) F-Clamps

Deburring Blades

DeWalt Battery Powered Drill and Impact Wrench, with Case & Battery Charger ...[more]

Dremel Engraver

Dremel Multi-Max MM30 Oscillating Multi-Tool, new in box, 120V / 3 Amps, 7 ft. cord, 14.25" tool length, 2" width, 3.2 deg. oscillation angle, 10,...

Mallet

Morse 5/8" 2-Flute Twist Drill Bit in Case

(2) Torque Wrenches and Other Miscellaneous Tools

Bin - U-Bolt, Misc. Tools

Bin - Large U-Bolts

Bin - Large U-Bolts

Marvel No. 8 Mark I Tilt Frame Vertical Bandsaw, 18" x 20" cap. at 90 deg., 18" x 12.5" at 45 deg., 50 - 450 fpm blade speeds, 2 hp, 14'6" x 1" x ...

Monarch Model NN 47" Facing Lathe, 47" swing over bed, 46" 6-jaw face plate type chuck, 2 - 405 rpm, 15 hp main motor, Newall DRO, 5 hp Baldor var...

14" x 40" Jet Model GH-1440-ZX Engine Lathe, new 2009, 14" swing, 11" over slide, 44" centers, 3-1/8" spindle bore, D1-8 spindle nose, 12 spindle ...

Mighty Turn Model ML-2160GL Engine Lathe, 21" swing over bed, 11-13/16" over cross slide, 28" in gap, 60" centers, 9 - 1600 rpm, 15 hp, 3-1/4" spi...

29" x 60" Acer Swing 29 Series Engine Lathe, Model 2960G, 29-1/8" swing over bed, 20-1/2" over slide, 37-25/32" in gap, 20-1/4" gap length, 60" ce...

Wilton 15" Floor Drill Press, 15" swing, 2MT spindle taper, 12 speeds, 250 - 3100 rpm, 3/4 hp, 5/8" chuck, 1-7/8" quill dia., 3-3/8" spindle trvl,...

Steel Dragon SDT-300 Pipe Threader, 1/8" - 2" pipe threading cap., 1/4" - 2" bolt threading cap., motor: 1500W / 60Hz / 40 rpm, 115V input power, ...

Jet Model HBS-916W Horizontal Bandsaw, 9" x 16" cap., 4 blade speeds, 82 - 235 fpm, 1.5 hp motor, 45 deg. vise swivel, 119.5" x 1" x 0.035" blade,...

Mitsubishi Model R230-35A CNC O.D. / I.D. Grinder, new 2000, 9.1" swing, 5.9" max. diam., 13.8" centers, 16" dia. x 2" width x 5" arbor grinding w...

Craftsman Commercial 15-1/2" Floor Drill Press, 15-1/2" swing, 8 spindle speeds, 380 - 8550 rpm, 1/2 hp, 4" spindle trvl, 1/2" drill chuck, 12' x ...

Floor Drill Press, S/N 32-911

Dayton Model 2LKR6 6" Double End Pedestal Grinder, 6" grinding wheels (2), 1/2" arbor, 1/3 hp motor, 3450 rpm, 120/240V/ 3.5/1.75A / 60Hz, Lot #1...

60" Lodge & Shipley T-Lathe, 60" swing, 28" carriage length on bed, 20" headstock length on bed, 7.5 - 422 rpm, 25 hp, 2-1/2" spindle bore, 10 fpm...

Reed No. 104R Pedestal Vise

Snap-on FM-140A Welder

Table with Contents, inc. Vises, Gauges, Etc

Table with Contents, inc. Tooling, Etc

8" Kitigawa B-208 3-Jaw Chuck #1 ...[more]

8" Kitigawa B-208 3-Jaw Chuck #2 ...[more]

12.5" 3-Jaw Chuck, max. 1500 rpm

20" 4-Jaw Chuck ...[more]

20" Face Plate with 8 Radial Slots ...[more]

Steady Rest

Pallet with 4 Containers of Chuck Parts