This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 905-669-8893 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
Bidding has ended
LOT PIN GAUGES - Image 1 of 2
LOT PIN GAUGES - Image 2 of 2
LOT PIN GAUGES - Image 1 of 2
LOT PIN GAUGES - Image 2 of 2
Auctioneer has chosen not to publish the price of this lot
Bolton, Ontario

DSA Precision Machining Inc. - Due to Owner Retiring

Ends from
Venue Address
4 Holland Dr.
L7E 1G1


National Rigging & Transportation
100 Municipal Street
Welland, Ontario
Canada L3B 3P2
Attn: Darren Chapman
Office: 1-905-788-1110
Mobile: 1-905-704-9011


Rigging to Include: Electrical disconnect, dismantle and prep where applicable and loading onto provided flatbed trucks (Rigger can also quote transportation if requested). All prices are plus fees and taxes.  Contact rigger for pricing on loading into containers, dry vans,  palletizing lots, crating, wrapping, blocking, etc.

Important Information

Auction Date & Time: lots start closing on Tuesday, January 31st at 11:00 am ET 

Location: 4 Holland Dr, Bolton, Onatrio L7E 1G1

Inspection: Monday January 30th, 9AM - 4PM or By Appointment

18% Buyers Premium applies on all online purchases. 


2008 OKUMA TWIN STAR LT300-MY 8-Axis CNC Turning & Milling Center, OSP-P200L CNC Control, Twin 12-Station Turrets, Twin Spindles w/ 9” 3-Jaw Chucks, Dual Chip Conveyors, Max Diameter 13.78”, Max Length 35.0”, Bore 2.44”, s/n 138805 (Note: Live Milling Needs Repair)

OKUMA CROWN 762S-BB CNC Turning Center, OSP700L CNC Control, 9” 3-Jaw Chuck, Tailstock, 12-Station Turret, Chip Conveyor, s/n C551

OKUMA CADET LNC8 CNC Turning Center, OSP700M CNC Control, 10” 3-Jaw Chuck, Tailstock, 12-Station Turret, 9.84” Max Diameter, 19.69” Max Length, s/n E249

OKUMA CADET LNC8 CNC Turning Center, CNC Control, 10” 3-Jaw Chuck, Tailstock, 12-Station Turret, 9.84” Max Diameter, 19.69” Max Length, s/n B691

OKUMA CADET LNC8 CNC Turning Center, CNC Control, 10” 3-Jaw Chuck, Tailstock, 12-Station Turret, 9.84” Max Diameter, 19.69” Max Length, s/n C527

2008 HAAS VF-2DTR 5-Axis CNC Vertical Machining Center, CNC Control, Travels: X-30”, Y-16”, Z-20”, 14” x 36” Table, Trunnion Table, Renishaw Optical Tool Setter, Renishaw Probe, (24) ATC, Auger Chip Recovery, 20HP Vector Dual Drive, 1,000 IPM, s/n 1068513

KITAMURA Mycenter-3X 3+2-Axis CNC Vertical Machining Center, CNC Control, Travels: X-30”, Y-20”, Z-25”, 16” x 36” Table, HAAS TR160 Trunnion Table, HAAS Brushless Rotary Two-Axis Control, 10,000 RPM Spindle, (20) ATC, Chip Conveyor, s/n 11864

KITAMURA Mycenter-2X 3+2-Axis CNC Vertical Machining Center, CNC Control, Travels: X-23”, Y-20”, Z-25”, 12” x 31” Table, HAAS TR160 Trunnion Table, HAAS Brushless Rotary Two-Axis Control, 10,000 RPM Spindle, (20) ATC, Chip Conveyor, s/n 07082

VDF BOEHRINGER GOPPINGEN Lathe, ACU-RITE 2-Axis DRO, 10” 3-Jaw Chuck, 22” Swing, 60” Bed, Tool Post, Tailstock, Spare Chucks

LAGUN FTV-2 Vertical Milling Machine, Mitutoyo 2-Axis DRO, Power Feed, 5HP, 9” x 48” Table

TOS FA-3AU Horizontal Milling Machine, 10” x 54” Table, 2,000 RPM, s/n 3005, Universal Milling Head Attachment, Arbor Supports

CRAFTEX B096 Milling & Drilling Machine, s/n 436991, 9.5” x 32” Table

(2) 2007 EVERISING H-260HB Horizontal Automatic Bandsaws, s/n’s 10304, 10416

2004 MITUTOYO Crysta-Apex C544 CMM, Model 4086M-3111, Travels: X-20”, Y-20”, Z-15”, Renishaw MH20 Probe, s/n 0291407

MITUTOYO PH-3500 Optical Comparator, 2-Axis DRO, s/n 110111

MITUTOYO PH-350 Optical Comparator, 2-Axis DRO, s/n 10451

2021 SIC C153ZA Marking System, s/n 89012

EASY-KLEEN EH430E448A-575 Hot Pressure Washer, s/n 2144420, 4 GPM, 7.5HP, 3,000 PSI, 575V, 3 Phase (Purchased New in 2022)

ACCU-FINISH Series II Tool Cutter Grinder

TOYOTA 7FGCU15 Propane Forklift, s/n 64046, 2,650lb Cap., 189” Max Lift, 3-Stage Mast, Side Shift, Automatic Fork Positioning, Solid Tires, Approx, 2,400hrs

COMPAIR L22-9 Compressor, 22KW, s/n 349015-6965

(2) TECHQUIP Piston Type Air Compressors, 10HP

2007 DVAIR Air Dryer


PLUS: Power & Hand Tools, General Machining Tooling, Metal Cabinets, Workbenches, Toolboxes, Precision Instruments, Drill Sharpeners, Tool Holders, LANG Vises, LISTA Heavy Duty Tool Storage Cabinets, Height Gauges, Micrometers, Verniers, Machine Vises, Chucks, Tool Holder Carts, Collets, Granite Surface Plates, Drill Bits, End Mills, Reamers, Carbide Cutters, Shop Carts, Pedestal Grinders, Shop Press, Pallet Racking, Cantilever Racking, Metal Bar Stock, Ladders, Belt & Disc Sanders, Dust Collectors, Electric Stackers & Die Lifters, Shop Vacs, Pressure Washers, HAAS Trunnion Tables, Hydraulic Lift Cart & Much More!



BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST


Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions


Terms and Conditions

PAYMENT:    All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).

Payment is due by:  2PM Wednesday February 1st, 2022.

A 18% buyers premium will be added to all online purchases

Your credit card added through the fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00 

Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.

Removal deadline:   TBD

Site Supervisor:   TBD

Accounting: Victoria 905-669-8893 Ext. 207,

Banking Information (Wire Transfers):


Beneficiary Bank: ROYAL BANK OF CANADA
3300 HIGHWAY #7

Beneficiary Customer:
ACCOUNT #: 1007137

TRANSIT #: 00192
BANK #: 003


ABA#: 021000021
IBAN #: 003401028600192


Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.



The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale: 

  1. All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
  2. All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
  3. Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
  4. Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
  5. Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
  6. No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
  7. Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer. 


NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.


See Full Terms And Conditions

Tags: Pin Gauge, Gauge