Day 1 - Niigon Machines Ltd.

by Infinity Asset Solutions Inc

Ended Nov 30, 2021 4:17pm ET (9:17pm GMT) Timed Online Auction

Important Information


Auction Date & Time: lots start closing on Tuesday, November 30th at 9:00 am ET

Location: 370 & 372 New Enterprise Way, Woodbridge, Ontario

Inspection: Monday November 29th, 9AM - 4PM or By Appointment

18% Buyers Premium applies on all online purchases.

Featuriing: (partial listing)

New & Demo Injection Molding Machines

2019 NIIGON NPET 300 P120 E120 Lights Out Horizontal To Stage Injection Molding Machine, 337 Ton Capacity s/n 1089, 825mm x 825mm Tie Bar Spacing w/ Automatic Mold Height Adjustment, 1500mm Clamp Daylight w/ 450 to 825mm Shut Height, Mold Break Force of 300 kN w/ up to 30mm Stroke, 120mm 25:1 PET Screw, 5,930g/13.2lb PET Max Shot Size, 5,259cc Volumetric Shot Size, Max Throughput 960kg/hr, Standard Hydraulic Ejector w/ 250mm Stroke at 95 kN at 700mm/s, 40mm Boost Stroke at 645 kN (NEW COST $650K USD)

2019 NIIGON NPET 150LL Cube Horizontal Injection Molding Machine, s/n 1066, 560mm x 560mm Tie Bar Spacing w/ Automatic Mold Height Adjustment, Cube Configuration: Max 2000mm, Min 1000mm, Mold Height Per Mold: Max 590mm, Min 340mm, Single Face Configuration: Daylight: Max 2000mm, Mold Height: Max 700mm, Min 450mm, Mold Break Force of 150 kN w/ Up to 24mm Stroke, Primary Injector Unit RS36/36: 36mm 25:1 PET Screw, 167g PET Max Shot Size, 147cc Volumetric Shot Size, Rotary Cube Mold Carrier, 555mm Table Dia., 130mm Locating Hub Dia., Max Mold Weight of 650kg Per Side, 150 PET Tombstone, Hydraulic Ejector Per Side w/ 100mm Stroke at 40 kN at 700mm/s, 25mm Boost Stroke at 240 kN (NEW COST $580K USD)

2016 NIIGON APET 150 RS 42/36 Horizontal Injection Molding Machine, 170 Ton Capacity, 6.5 oz Shot Size s/n 1019, 560mm x 560mm Tie Bar Spacing, 1350mm Clamp Daylight w/ 450 to 700mm Shut Height, Mold Break Force of 150 kN w/ up to 24mm Stroke, Primary Screw & Barrel 36mm 25:1 Screw PET, Secondary Screw & Barrel 50mm 21:1:1 Screw PET (NEW COST $220K USD)

2017 NIIGON A150 RS 50/50 HS Horizontal Dual Mold Injection Molding Machine, 170 Ton Capacity, 6.5 oz Shot Size s/n 1059, 560mm x 560mm Tie Bar Spacing, 1350mm Clamp Daylight w/ 250 to 70mm Shut Height, 42mm Screw Dia., 25:1 L/D (NEW COST $140K USD)

2015 NIIGON A150RS 42/42 Horizontal Injection Molding Machine, 170 Ton Capacity, 6.5 oz Shot Size s/n 1016, Clamp 1350mm Daylight w/ 700mm Max Shut Height, 42mm 20:1 General Purpose Screw and Barrel (NEW COST $100K USD)

2014 NIIGON A150RS 42/42 Horizontal Injection Molding Machine, 170 Ton Capacity, 6.5 oz Shot Size s/n 1013, 42mm 25:1 GP Quick Change 42/42 Barrel Screw, 560mm x 560mm Tie Bar Spacing, 1000mm Clamp Daylight

2012 NIIGON A150 Horizontal Injection Molding Machine, 170 Ton Capacity, s/n 1003, 560mm x 560mm Tie Bar Spacing, 1000mm Clamp Daylight, Hydraulic Mold Height Adjustment

NIIGON Prototype Horizontal Injection Molding Machine, s/n 1099, 300mm x 300mm tie bar spacing, 600mm Clamp Daylight

2015 NIIGON Rotary Table Platen Prototype Test Machine, s/n 912, 1000mm Platen, Automation Technology Controller


Paint Spray & Wash Booths

UNITED SPRAY BOOTHS LTD. Wash Booth, Approx. 60’L x 18’W x 12’H w/ Separate Chemical Storage Area, Sliding Doors, TWIN FLOW AIR SYSTEMS LTD. TF5753803 Air Makeup Unit, 40HP, s/n 042015, Controls, HOTSY 1836SS Pressure Washer, s/n 11096640-100094, 3,000 PSI, 6.0 GPM, 225 Degrees F Max Temp., 11.5hrs

UNITED SPRAY BOOTHS LTD. Paint Spray Booth, Approx. 50’L x 18’W x 12’H, Sliding Doors w/ Controls


Clean Room

2019 Clean Room w/ AMAIRCARE Air Wash Unit, (2) RITE-HITE LITESPEED CLEANROOM Rollup Doors w/ Automated Locking, s/n 121714, etc. (COST OVER $900K)


Resin Drying & Handling

CONAIR Dryer System #5, CONAIR W2400 Dryer Unit, s/n 304335, TouchView Control, ABB Drive, CONAIR 142218L4701900 Hopper/Holding Unit, CONAIR Loader, Dryer Capacity Level Control, CONAIR CGT-500 Gastrac Process Air Heater, s/n 303780, Natural Gas, 500,000 BTH/Hr Max, GasTrac Control

CONAIR Dryer System #1, CONAIR W1300 Dryer Unit, s/n 304080, TouchView Control, ABB Drive, CONAIR 142218L470P100 Hopper/Holding Unit w/ Support Structure, s/n 305149, Dryer Capacity Level Control, CONAIR Loader, CONAIR Gastrac Process Air Heater Model CGT-350, s/n 303781, Natural Gas, 350,000 BTH/Hr Max, CONAIR GasTrac Control

CONAIR Dryer System #1 (Small), CONAIR 142184 Dryer Unit, s/n 254418, ABB Drive, TouchView Control, Carousel Plus, CONAIR CH39 Hopper w/ Support Structure, s/n 254347, CONAIR Loader, CONAIR HTC15 Drying Hopper Temperature Control, s/n 254438

(4) CONAIR Hopper/Holding Units w/ CONAIR Loaders & Mezzanine Structure

CONAIR RSS 30-Station Resin Selection Station, s/n 306832

CONAIR 16-Station Resin Selection Station

MICRO INTERFACE DESIGN MIDEXX-3D Liquid Colour Additive Feeder, s/n 52103

(2) CONAIR DL Loaders, s/n’s 303800, 264954

CONAIR DL Hopper/Loader

CONAIR Bulk Hopper Storage Unit, Bottom Loading

(2) CONAIR 29-900 Pneumatic Gaylord Tilters, s/n’s E101510105-1, E101510105-2

IMCS J1001802-1 HYDRA-DUMP Hydraulic Gaylord Lifter, 2,500lb Cap., 65” Dump Height, 52”W Bucket, s/n 1001802

CONAIR Hydraulic Gaylord Lifter, 2,500lb Cap.

CONAIR CHS-819 Granulator, 15HP

CONAIR 201420L0130P100 Bulk Transfer & GENUINE Bindicator System, s/n 303185, Bulk Loading Controls

CONAIR Bulk Loading Control & GENUINE Bindicator System


Material Handling & Rolling Stock

DYNACON 24VS47060R Conveyor System

2014 MB CONVEYORS N-CPR EASY-LINE Light Conveyor System, s/n B43371


Chiller Systems

BERG PT-644-2(20)1(1B) Glycol Tank Set c/w Free Cooling HX, s/n W02980N-BC1-0915

BERG PT-644-2(15)1(B)-HX Process Water Tank, s/n W02980P-BB10915

BERG CT-846-2(15)1(B)X2(7.5)1(B) Chiller Tank, s/n W02980M-BD1-0915

BERG WCQ-120-2/2-X Central W/C Chiller, s/n W02980A-AH1-0915, 120HP

BERG BTC-1(15) Portable Temperature Control Unit Pet Mold Cooling, TCU1, #1089, s/n W02980H-KC1-0915

BERG BTC-1(15) Portable Temperature Control Unit Pet Mold Cooling, TCU5, s/n S03185A-KC1-0317

BERG BTC-1(15) Portable Temperature Control Unit Pet Mold Cooling, TCU2, s/n W02980I-KC1-0915

BERG BTC-CS-1(15) Portable Temperature Control Unit, TCU6, s/n S03438A-KC1-0119

BERG BTC-1(7.5) Portable Temperature Control Unit GP Mold Cooling, TCU3, s/n W02980J-KC1-0915

THERMAL CARE TCR60 60-Ton Chiller, s/n 17138011201 w/ Roof Mounted Condenser

Chiller Water Tank / Pump Desk, (1) 50HP, (1) 25HP, (1) 10HP

2013 EISBAR DAS E5 B11 Portable Cooling Unit, Siemens Simatic Panel Control, s/n V43161-01-3613

CONAIR ECW10 Chiller Unit, EarthSmart Chiller SX, s/n 233935


Air Management Systems

CONAIR Vacuum System w/ (6) CONAIR PD Vacuum Pumps, s/n's 304886, 304885, 304884, 304888, 304887, 304889 w/ (6) CONAIR Outerwear Pre-Filter Units

CONAIR EQP2CNV Vacuum Pump, s/n 306670, 25HP w/ Leeson CONAIR Filter Unit

(3) CONAIR PD Vacuum Pumps w/ (3) CONAIR Filter Units

2018 BUSCH Mink MM 1142 BV Vacuum Pump w/ Controls, Approx. 10,469hrs & 17,039hrs & .76hrs

2015 BUSCH High Vac Pump System w/ Controls, (2) BUSCH Mink MM 1142 BV Vacuum Pumps, Approx. 4,783hrs, 5,026hrs & 523hrs, Holding Tank                                     



BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Friday, 8:00 AM EST – 8:00 PM EST


Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions


Terms and Conditions

PAYMENT:    All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).

Payment is due by:  2PM Friday December 3rd, 2021.

A 18% buyers premium will be added to all online purchases

Your credit card added through the fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00. 

Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00. Credit Card Payments can only be processed in CANADIAN FUNDS.

Removal deadline:   Thursday December 16th, 2021.

Site Supervisor:   ODD 647-991-6905

Accounting: Victoria 905-669-8893 Ext. 207,

Banking Information (Wire Transfers):






ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003


ABA#: 021000021
IBAN #: 003401028600192


Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.



The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale: 

  1. All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
  2. All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
  3. Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
  4. Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
  5. Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
  6. No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
  7. Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer. 


NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.