553
LOT OF (2) 2-WHEEL DOLLIES (NORTH PLANT, MACHINE SHOP ENTRANCE)
Auctioneer has chosen not to publish the price of this lot
Pittston, Pennsylvania
0.00%
18.00%
Description
LOT OF (2) 2-WHEEL DOLLIES (NORTH PLANT, MACHINE SHOP ENTRANCE)
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
LOT OF (2) 2-WHEEL DOLLIES (NORTH PLANT, MACHINE SHOP ENTRANCE)
Day 2 - Surplus to the Ongoing Operations - Cascades Tissue Group - Pittston, PA
Ends from
Venue Address
901 Sathers Dr,
Pittston
Pennsylvania
18640
United States
Pre-Approved Machinery Movers
Mike’s Welding LLC
Mike Yusinski
(Cell): 570-840-2477
(Office): 570-499-3490
M.J. Nester Equipment
Jim Cisick
610-256-1370
Ronco
Brad Reeves
570-319-1832
Important Information
2-Day Auction
Auction Date & Time: lots closing on Friday, June 4th at 11:00 am ET
Location: 901 Sathers Dr, Pittston, PA 18640, United States
Inspection: By Appointment only.
TISSUE CONVERTING EQUIPMENT
PA Bath B1
- PCMC Backstands, 83”W, 68” Dia.
- Perforated Roll, 85.5”W, 28.6” Circumference, 4,091” Perf. Length Min, 4.25” Perf. Length Max, (7) Rows of Perf., (11) Sheet Multiples, Slippage
- 1963 PCMC Embosser, s/n M826, Steel-to-Steel, Matched, 85” Max Width, Flower US Pattern, Flower/Stitch
- KARNEL MRD2 Tail Sealer, Fixed Gun, 15 Logs/min Max Cycle Speed, 83” Max Width
- ROLCO Accumulator, (215) Buckets, 83” Max Log Width, (2) Lane Discharge
- 1963 PCMC 100 Series Log Saw, s/n R-448-03, Gears, 4.25” Cut Length/Slitter Position, (150) Max Cuts/min Per Lane, 94” Max Width of Logs, (1) Air Cut, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, CompactLogix Electronic Platform
- 1998 LANGEHAMMER F81-S130-2-5/300 Diverter, 2:3 Configuration, Controlled by Saw
- 1994 HAYSSEN UF130EPS Right Hand Wrapper, s/n 84496, (4) Infeed Lanes, (2) Layer, Poly Wrapping Material, 12-24 Format, 20” Max Pack Width, 12” Max Pack Height, 25” Max Pack Length, 60” Shear Width, 130 Max Cycle Speed, 480VAC, BAM Electronic Platform
- HAYSSEN 5700 Right Hand Wrapper, s/n 13941, (2) Infeed Lanes, (2) Layer, Wrapping Material: Poly, 45PPM Max Cycle Speed, 480VAC, ABSLC504 & Relay Electronic Platform
- 1975 SALWASSER M43, R405 Case Packer, s/n 751296, (2) to (5) Infeed Lanes, Manual Magazine Feeder, (50) Cases in Magazine, 18” Max Case Width, 22.5” Max Case Height, 28” Max Case Length, 4 Case/min Max Cycle Speed, 480VAC, AB-PLC5 Electronic Platform
- LOVESHAW 16B Case Sealer, Tape – External
- 1991 MATTHEWS WR4 Palletizer, s/n P92-68420/P94-00766, 25-30 Load/hr, Layer Forming, AB PLC5 Electronic Platform
- 1991 LANTECH SVAST Stretch Wrapper, s/n P92-68420/P94-00766, 20” Film Width, 30 Load/hr, Complete w/ Pallet Conveyors & Turntable, AB SLC/505 Electronic Platform
- HARRINGTON Overhead Crane System, 85’L x 3-Ton Cap., Chain Hoist, Pendant Control
PA Bath B4
- BRETTING Backstands, s/n 4548-91, 83”W, 72” Dia., (2) Backstands
- Perforated Roll, 85.5”W, 28.6” Circumference, 4,091” Perf. Length Min, 4.091” Perf. Length Max, (7) Rows of Perf., (11) Sheet Multiples, Slippage
- 1963 PCMC Embosser, s/n M826, Steel-to-Steel, Matched, 85” Max Width, Flower US Pattern, Flower/Stitch
- KARNEL MRD2 Tail Sealer, Fixed Gun, 15 Logs/min Max Cycle Speed, 83” Max Width
- ROLCO Accumulator, s/n 6586, (315) Buckets, 83” Max Log Width, (2) Lane Discharge
- 1977 PCMC 150 Series Log Saw, s/n 5922, Gears, 4.25” Cut Length/Slitter Position, (150) Max Cuts/min Per Lane, 94” Max Width of Logs, (1) Air Cut, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, CompactLogix Electronic Platform
- 1999 LANGEHAMMER F81-M130-2-5/300 Diverter, 2:3 Configuration, Controlled by Saw
- 1984 HAYSSEN UF160 Right Hand Wrapper, s/n 16417, (3) Infeed Lanes, Poly Wrapping Material, 4 – 6 (176sh) Format, 16.5” Max Pack Width, 6.0” Max Pack Height, 13.5” Max Pack Length, 45” Shear Width, 130 Max Cycle Speed, 480VAC, TI530T Electronic Platform
- VALLEY TISSUE Single Roll Wrapper, (2) Infeed Lanes, (1) Layer, Wrapping Material Paper, 140PPM Max Cycle Speed, 480VAC, ABSLC504 Electronic Platform, Updated in 2010 w/ PLC SLC 504
- 1992 SALWASSER L44, R402 Case Packer, s/n 9208155, (2) to (5) Infeed Lanes, Manual Magazine Feeder, (300) Cases In Magazine, 20” Max Case Width, 19” Max Case Height, 30” Max Case Length, 4 Case/min Max Cycle Speed, 480VAC, AB-PLC5 Electronic Platform
- LOVESHAW 16B Case Sealer, Tape – External
- HARRINGTON Overhead Crane System, 85’L x 3-Ton Cap., Chain Hoist, Pendant Control
PA Towel T1
- PCMC Backstands, 69”W, 72” Dia., (2) Backstands
- Perforated Roll, 72”W, 33.75” Perf. Roll Circumference, 5.625” – 11.25” Perf. Length Min, 3/6 Number of Rows of Perf., (1) Sheet Multiples
- PCMC Printer, s/n 7257, 9.350” Max Diameter, 70” Max Width, (2) Colours, 30.159” Repeat, Upgraded to Doctor Boxes
- 1990 PCMC Embosser, s/n 7257, Rubber-to-Steel, Nested Style, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
- PCMC Spraymation Tail Sealer, Spray Type, 22 Logs/min, 68” Max Width
- PCMC R904 Accumulator, s/n 7257, (296) Buckets, 68” Max Log Width, (2) Lane Discharge
- 1990 PCMC LS-520 Log Saw, s/n R-904, Servos, 11” Cut Length/Slitter Position, 85 Max Cuts/min Per Lane, 77” Max Width of Logs, Rotary Grinding, Trimex Type Shuttle Upgrade, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (3) Outfeed Lanes, ControLogix Electronic Platform
- PACKAIR Diverter, 2:4 Configuration, AB SLC/504 Electronic Platform
- 1991 SALWASSER L44, R405 Case Packer, s/n 91012869, (1) to (5) Infeed Lanes, Manual Magazine Feeder, (500) Cases in Magazine, 20.5” Max Case Width, 23” Max Case Height, 30.5” Max Case Length, 5.5 Case/min Max Cycle Speed, 480VAC, TI530T Electronic Platform
- HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control
PA Towel T2
- PCMC Backstands, 69”W, 72” Dia., (2) Backstands
- Perforated Roll, 72”W, 33.75” Perf. Roll Circumference, 5.625” – 9” – 11.25” Perf. Length Min, 3/6 Number of Rows of Perf., 4/8 Sheet Multiples, Slippage
- PCMC Printer, s/n M-426, 9.350” Max Diameter, 70” Max Width, (2) Colours, 30.159” Repeat
- PCMC Embosser, s/n M426, Rubber-to-Steel, Nested Style, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
- KARNEL MRD2 Tail Sealer, s/n 295167, Fixed Gun, 15 Logs/min Max Cycle Speed, 68” Max Width
- ROLCO Accumulator, s/n 6606, (257) Buckets, 68” Max Log Width, (2) Lane Discharge
- 1975 PCMC 150 Series Log Saw, s/n R702, Gears, 11” Cut Length/Slitter Position, 75 Max Cuts/Min Per Lane, 77” Max Width of Logs, Rotary Grinding, Trimex Type Vacuum, Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, MicroLogix Electronic Platform
- Diverter, 2:2 Configuration, AB SLC/504 Electronic Platform
- HAYSSEN UF160 Left Hand Wrapper, 1 – 3 Infeed Lanes, (1) Layer, Poly Wrapping Material, 16.5” Max Pack Width, 6.0” Max Pack Height, 13.5” Max Pack Length, 45” Shear Width, 160 Max Cycle Speed, 480VAC, Control Logix Electronic Platform ($125k Control Upgrade in 2004)
- 1975 SALWASSER M43, R405 Case Packer, s/n 751295, (4) or (5) Infeed Lanes, Manual Magazine Feeder, (50) Cases in Magazine, 18” Max Case Width, 22.5” Max Case Height, 28” Max Case Length, 3 Case/min Max Cycle Speed, 480VAC, AB SLC/504
- HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control
PA Towel T3
- BRETTING Backstands, s/n 4547-91, 69”W, 72” Dia., (2) Backstands
- Perforated Roll, 94.5”W, 45” Perf. Roll Circumference, 5.625” – 9” – 11.25” Perf. Length Min, 4/5/8 Number of Rows of Perf., 4/5/8 Sheet Multiples, Slippage
- PCMC Printer, s/n M-322, 9.350” Max Diameter, 90” Max Width, (2) Colours, 30.159” Repeat
- PCMC Embosser, s/n M541-05, Rubber-to-Steel, Nested Style, 68” Max Width, Diamond Pattern, 1.25” Flat Usual Nip Width, Laminator, N-2496
- KARNEL MRD2 Tail Sealer, Fixed Gun, 17 Logs/min Max Cycle Speed, 68” Max Width
- PCMC Accumulator, s/n R90253, (246) Buckets, 68” Max Log Width, (2) Lane Discharge
- 1975 PCMC 150 Series Log Saw, s/n R01212, Gears, 11” Cut Length/Slitter Position, 75 Max Cuts/min Per Lane, 99” Max Width of Logs, (2) Air Cuts, Rotary Grinding, Trimex Type Trim Picker, Trim Removal Blower to Bailer, 1” Min Trim, (1) Blade, (2) Infeed Lanes, (2) Outfeed Lanes, AB SLC/504 Electronic Platform
- Diverter, 2:2 Configuration, AB SLC/504 Electronic Platform
- 2003 SALWASSER CL405, CP430 Case Packer, s/n 200305AQ3548, (1) to (5) Infeed Lanes, Manual Magazine Feeder, (500) Cases in Magazine, 24” Max Case Width, 23” Max Case Height, 30” Max Case Length, 12 Case/min Max Cycle Speed, 480VAC, AB SLC/504 Electronic Platform, All Servo Motors
- HARRINGTON Overhead Crane System, 95’L x 3-Ton Cap., Chain Hoist, Pendant Control
PA Napkin N1
- 2009 PACK AIR GRIPPER Box Elevator, s/n 7193, 12’ Lift
PA Napkin N2
- (2) 1999 BRETTING 4 Colours Graphic Print Deck Flexo Printer, 48” Max Width, Closed Cavity Doctor Boxes, Ceramic Anilox Rolls ($12mil Install cost in 1999)
- COFFING Free Standing Crane System, 43’L x 40’W x 18’H, 2-Ton Cap., (2) Chain Hoists, Pendant Control
- COFFING Overhead Crane System, 110’ x 2-Ton Cap., Chain Hoist, Pendant Control
- 2005 AMBAFLEX SV-400-1800 Spiral Conveyor, s/n 23.398/05, 14’ Lift, Box Inlet 28”, Box Out 14’, Total Height 15’, Inlet vs. Outlet 180 Degrees
PA Napkin N3
- BRETTING (4) x 24”W Backstands
- Perforated Roll, (2) Sheet Multiples
- BRETTING Printer, 24” Max Width, (2) Colours, Upgraded w/ Doctor Boxes
- LOVESHAW 16B Case Sealer, Tape – External
- HARRINGTON Overhead Crane System, 15’ Rail x 1-Ton Cap., Chain Hoist, Pendant Control
PA Napkin N4
- 2009 PACK AIR GRIPPER Box Elevator, s/n 7193, 12’ Lift
PA Facial F1 COMPLETE LINE
- 1999 BRETTING 5452-987F Folder, s/n 5452-98D, Product Made: Facial, Product Type: Flat/Pop Up, (7) Chutes, 63.8” Max Width, 55.6” Usual Width, 425 – 500 ft/min Max Speed, 9 Logs/min Max Speed, Servos, Contrologix Electronic Platform
- BRETTING (4) x 64” Backstands, 60” Max Width, (4) Backstands, Can Run 65” Roll to Index (7) Clips
- Perforated Roll, 8” Perf. Length Min, (2) Sheet Multiples
- Calender Rolls, Smooth Pattern
- 1998 JONES-CARTONNER Cartonner, Infinity w/ Folder, s/n S-5548, Format: Reg/Big/Cube, AB/SLC504 Electronic Platform, 2018 Upgrade to Control Logix, Can Make Flat Boxes or Pop Up Cartons
- 1997 SALWASSER R-101 Case Packer, s/n 98033347, (1) Infeed Lane, Manual Magazine Feeder, (300) Cases in Magazine, 4 Cases/min Max Cycle Speed, AB/ SLC/504 Electronic Platform
- LOVESHAW 16B Case Sealer, Tape – External
- COFFING Free Standing Crane System, 125’L x 40’W x 18’H, 2-Ton Cap., (2) Chain Hoists, Pendant Control (2x runaway beams)
MISC. TISSUE CONVERTING EQUIPMENT
KUO’S GANG KG-223 Fully Automatic Inter-Fold Facial Tissue Converting Machine w/ Automatic Transfer Unit, 6-Lanes, Sheet Size: 210mm x 190mm, Folded Size: 105mm x 190mm, Folded Type: Interfold (V-Fold), Speed: 115m/min Max, Parent Rolld Width: 1,500mm, Parent Roll Diameter: 1,800mm, Inside Core Diameter: 8”/10” (Located in Kingsey Falls, QC)
2007 PCMC PROLOG LT *4*-Lane Saw w/ Shuttle Trim Eliminator, Model PCMC JOB# 1004590.033, Can Cut 3.5’’ - 6.5’’ (89 -165mm) w/ 1x 19’’ - 24’’ (610mm) Blade D * Depending on Log*, 250 Cuts/min, Max Log Length Including Trim is 138’’, Lead and Trail Shuttles Included, 460V, Control Logic 24V DC, Allen-Bradley Servo Drive, Well Maintained Purchased New, Recently Removed from Operation (Located in Candiac, QC)
(2) 1998 ITAL CONVERTING BS1801 Backstand, s/n’s 00161, 00162, Max Parent Roll Width: 102”, Max Parent Roll Diameter: 72” (Located in Waterford, NY)
1996 CONSANI 360A Back Stand, s/n 7691, Max Parent Roll Width: 102”, Max Parent Roll Diameter: 72”, Shaftless (No Hydraulic Powerpack) (Located in Waterford, NY)
1993 PERNI S/S Emboss/Laminator Embosser, s/n 6751, Type: Rubber-to-Steel, Style: Tip-to-Tip, Max Width: 108” (Currently Configured for 102"), Emboss Pattern: Spot, Laminator w/ Spare Laminator Glue Fountain Roll, Spare Laminator Glue Applicator Roll, (2) Spare Emboss Rubber Rolls (Located in Waterford, NY)
1994 SENNING 522 SE/M/U Wrapper, s/n 56970, (1) Infeed Lane, (1) Layer, Wrapping Material: Paper, Type of Packs: Can be Variable, Max Cycle Speed: 60, Nordson Hot Melt Pro Blue 10 (Located in Waterford, NY)
CORE MAKING EQUIPMENT
- PCMC BRT Core Winder, s/n A5778, 4” I.D., 3” Paper Width, 350 ft/min, 58” Max Reel Diameter, 30# Paper Grade, Servo on Knife, Contrologix Electronic Platform, Upgraded for Servo Carriage
- PCMC HHT Core Winder, s/n 7281, 4” I.D., 3” Paper Width, 350 ft/min, 58” Max Reel Diameter, 30# Paper Grade, Servo on Knife, Contrologix Electronic Platform, Upgraded for Servo Carriage
- PCMC Core Winder, Model 8032, Including 2 Back Stands, Winder, Saw, Roll Down Table, Electrical Cabinet, Vacuum Blower for Saw House and Drum, Communication/Tool Board, Core Stock Storage Rack, Includes All Piping for this Machine (Located in Pryor, OK)
- PCMC Core Winder, Model 8033, Including 2 Back Stands, Winder, Saw, Roll Down Table, Electrical Cabinet, Vacuum Blower for Saw House and Drum, Small Back Board for Straightening Out Cores, and Glue Tote Rack and Pump, Includes All Piping and Conduit for this Machine, Core Stock Storage Rack (Located in Pryor, OK)
- SOUTHWORTH T490 Core Stock Skids Roll Upender
- Core Upper Distributor
- LARGE QTY. OF MATTHEWS 6”W Overhead Core Belt Conveyors, Approx. 360’L
PLANT SUPPORT EQUIPMENT
2015 FUTURA F80.A4 4-Colour Printer, s/n 183, Drive Side: (as per web flow) Left, Web Width: Max 110” (2590.8mm), Cliché Roll Diameter: Base Mandrel Diam. 12.15” (308.61mm), Total Finished Diameter (base mandrel + sleeve): 12.738” (323.54mm), Unwind Stand: 1x F70 Manual up to 1000 m/min (3280 ft/min), Parent Roll Max. Diameter: 3000mm (118”), Parent Roll Max Weight: 5000kg (11000lb) for Max Diameter 300mm (118”), Core Plugs – qty 4 – 297mm (11 11/16”), Rewinder: FOCUS “REELITE 20-ENS” Shaft Sizes: 2 x 3” + 2 x 12” 12-40 g/sq.M, Finished Reels Max Diameter 2500mm, Max Width 2700mm, Design Speed: 1300 mt/min, Operating 1100 mt/min, Slitting System CM 150A, Spool Handler: REELITE 20 ENS (NEW COST $4.3M+ USD), (Located in Barnwell, SC)
2010 FUTURA Dual Colour Printer, Machine Type F80.C2, s/n F00086/00424, 460 Amp, 60Hz, HMI Unit and Various Parts, Electrical Wires, Bolts and Bearings (Located in Wagram, NC)
FIBREFLOW FF350 Drum Repulping System, s/n 118, Pulping Section mat’l: SIS 2343, Screen Mat’l: SIS 2343, Vat Material: 316L, Hood Material: 216L, Drum Inside Diameter: 11’ 5-7/8”, Length 81’ 1-7/8”, Drum Weight Empty: 183,000lbs, (1) drive, 700HP, 1,800 RPM, Drum Speed: 13 RPM, 675 adst/day, Pulp Consist: 15-18%, Screen Consist: 4%, Vat Consist: 3.5% (NEW COST $3.75M USD) (Located in Pryor, OK)
(12) KINGSKILDE TRL 100 Trim Blowers, 10HP, 8” Inlet, 6” Outlet, 3,500 RPM
LARGE QTY. OF MATTHEWS Overhead Case/Boxes belt Conveyor, Approx. 2,600’L x 22”W, Powered/Belt/Incline/Decline
2002 AMBAFLEX Spiral Conveyor, Model SV-800-1800, s/n SV-23-398-CD, Up Orientation, Box Inlet: In – 28”, Out – 20’, 21’ Total Height, 90 Degrees (Located in Waterford, NY)
2002 AMBAFLEX Spiral Conveyor, Model SV-600-1800, s/n 2423-01, Down Orientation, Box Inlet: In – 28”, Out – 20’, 21’ Total Height, 180 Degrees (Located in Waterford, NY)
2002 AMBAFLEX Spiral Conveyor, Model SV-600-1800, s/n 2433-02, Box Inlet: In – 6’-6”, Out – 20’-6”, 21’ Total Height, 180 Degrees (Located in Wagram, NC)
2001 AMBAFLEX Spiral Conveyor, Model SV-400-1800, s/n 23.398/01, Box Inlet: In – 32”, Out – 20’-6”, 21’ Total Height, 180 Degrees (Located in Wagram, NC)
(3) NASH SC7 Vacuum Pumps complete kit with electrical motor and starter.
NES NC7 Vacuum Pump, s/n N8723-2
SULLAIR 32-25-300L-ACAC Air Compressor, 300HP, 1,750 CFM, s/n 003-82567
(3) NEBRASKA Boilers NF-F-72 (100,000 lb/h), Water Tube, s/n D3844, 46, 48, Max A.W.P. 250 PSI, Nat Gas w/ Associated Pumps, etc. (Located in Wagram, NC)
1993 NEBRASKA Boilers NS-E-66 (74,500 lb/h), Water Tube, s/n D3010, Max A.W.P. 250 PSI, 4,873 Sq. Ft., Nat Gas w/ Associated Pumps, etc. (Located in Wagram, NC)
2008 INGERSOL-RAND Air Compressor [Nirvana] Model-IRN300H-25, S/N ENO2O3UO8297 300HP (Located in Waterford, NY)
MULTITON SW 20-63 Walk Behind Forklift, s/n 1106653399 w/ Charger
BIG JOE S22-62 Walk Behind Forklift, s/n 427170693 w/ Charger
CROWN Stand Up Forklift, 24V
NISSAN 50MCU1F2A25LV Propane Forklift
POWER BOSS TSS/78-HD Floor Sweeper, LP, s/n 1770098
RIDGID 535 Pipes Threader, s/n EBE077841206
Large Qty. of Assorted Welders
Complete Machine Shop
REID No. 2-3 Surface Grinder
CLAUSING Lathe
WALLACE Electrical Hydraulic Press
BRIDGEPORT Style Milling Machine
Vertical Bandsaw
Bearing Heaters
BALEMASTER Horizontal Baler, s/n 94018 C/W Large Belt Infeed Conveyor
2010 PTR 3400-HD Baler, s/n 106457
AMERICAN BALER CORP. Baler, s/n 62442
2003 WASTE EQUIP. 6030XHD Baler, s/n 70650
TMC ML 1800 Wrapper
(3) MARKEM 700 SAP Wipe Arms
MARKEM 2200 SAP Label Applicator
(2) MARKEM 5200 Stand Case Printers
(2) MARKEM 5400 Stand Case Printers
(13) MARKEM 9232 Stand Alone Data Coders
TEXCON 9-8 Rotary Drum Dust Collector, Osprey Vacuum
EZ GO Golf Cart, s/n TXT PDS 2153188
SKYJACK 3226 Electric Scissor Lift, s/n 28144
GENIE Z-30/20N RJ Articulating Boom Lift, 500lb Platform Cap., 35’2” Max Working Height, 20’6” Max Horizontal Reach, 12’8” Max Up and Over Clearance, s/n Z30NF-19267
COPPER WIRE
ELECTRIC MOTORS & SPARE PARTS
COMPLETE STORES & BEARINGS, APPROX. $2MIL
(2) Storage Trailers
=========================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms and Conditions
PAYMENT: All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).
Payment is due by: 2PM Monday June 7th, 2021.
A 18% buyers premium will be added to all online purchases,
Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00
Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00
Removal deadline: Small items by Friday June 18, 2021. Large items by Friday July 16, 2021.
Site Supervisor: Bruce 289-828-2693
Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com
Banking Information (Wire Transfers):
USD WIRE TRANSFER INSTRUCTIONS:
BENEFICIARY BANK:
RBC ROYAL BANK
3300 HIGHWAY #7, WEST
CONCORD, ONTARIO L4K 1A5
BENEFICIARY NAME:
INFINITY ASSET SOLUTIONS INC.
63 MAPLECRETE ROAD
CONCORD, ONTARIO L4K 1A5
ACCOUNT #: 4010286
TRANSIT #: 00192
BANK #: 003
SWIFT CODE: ROYCCAT2
FOR CUSTOMERS FROM USA:
INTERMEDIARY BANK: J.P. MORGAN, NEW YORK
ABA#: 021000021
IBAN #: 003401028600192
Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever. 16. The Buyer acknowledges and agrees that the sale is made with the condition that NO complete line NOR 50% and more of a line, including a major component (the "Targeted Assets"), may be reinstalled in North America. Moreover, the Buyer accepts that if such Targeted Assets are sold, assigned, given or otherwise transferred to another part, this transfer of property shall be made with the same condition (the "Condition of sale").
EQUIPMENT REMOVAL PROCEDURES TERMS & CONDITIONS
The following are the standard procedures and terms and conditions for the removal of equipment or other items purchased at an Infinity Asset Solutions Inc. (“Infinity”) sale:
- All invoices must be paid in full prior to removal of equipment/ Each invoice must be marked “Paid in Full” and initialed by an authorized Infinity representative.
- All buyers are solely responsible for coordinating the removal of items purchased at the Auction and all associated costs.
- Buyers are responsible for, at their expense: a. Proper and safe disconnection and termination of all electrical, gas, water and/or air lines to machines conforming to all governing building codes; b. Shearing flush to the floor of all anchor bolts or fasteners; c. Erecting safety barriers around pits and holes in the floor created by removal of equipment until repaired; d. Repair all holes in the floor, walls or roof created by the removal of items purchased conforming to all governing building codes; e. Removing, off premises, machine oils and all hazardous materials (including all contaminants) contained in items purchased; f. Repairing all damage cased to the premises by a buyer, its representative or any other party hired by a buyer for the removal of items purchased; g. Leaving the work area in a clean, broom-swept condition conforming to all governing building codes; h. Any other specific terms and conditions communicated by Infinity before, during or after the auction sale; i. Removal of items purchased by the time and date set by Infinity before, during or after the auction sale; and j. The safety of all of a buyer’s employees, agents or representatives including all movers/riggers hired by such buyer.
- Prior to removal, all buyers, or any movers or riggers hired by a buyer, must provide to Infinity a satisfactory certificate of insurance evidencing at leas $5,000,000 in comprehensive liability insurance coverage (including workers compensation and automobile) per person, per occurrence.
- Prior to removal, an authorized Infinity representative must examine and approve the removal of all items purchased at the sale. Such approval shall be indicated by this representative initialing all invoices.
- No items shall be removed until after the auction sale. Removal hours are weekdays only between 8:00 a.m. and 4:00 p.m. unless otherwise specified.
- Buyers and their movers/riggers are jointly and severally liable for all damages, costs and expenses to the premises or any other assets which were cased by any of them, their employees, agents or representatives whether through negligence or otherwise. The Buyer indemnifies and saves Infinity harmless from any and all costs, expenses and claims suffered or incurred by Infinity as a result of any act or omission of such buyer and/or any mover or rigger retained by a buyer.
NO ITEMS SHALL LEAVE THE PREMISES UNTIL THE ABOVE HAS BEEN COMPLIED WITH TO INFINITY’S SATISFACTION.
NOTE: Buyers, please provide all movers or riggers hired by you with a copy of these procedures/terms and conditions as you will be held liable for their conduct.
