Refine your search
Category
- Warehouse Equipment (44)
- Warewashing (31)
- Home & Furniture (30)
- Machine Tools & Tools (25)
- Machines (10)
- Office furniture & supplies (10)
- Presses (7)
- Saws (7)
- Welders (6)
- Handling & Packaging (5)
- Landscaping (3)
- Pipes & Fittings (3)
- Restaurant & Bar Equipment (3)
- Sheet Metal Processing (3)
- Forklifts (2)
- Laboratory Supplies (2)
- Logging & Sawmill Equipment (2)
- Measuring & Testing Equipment (2)
- Metalworking (2)
- Other Industrial Supplies & Equipment (2)
- Panel & Edge Processing Machines (2)
- Processing Equipment (2)
- Surface Treatment Machinery (2)
- Audio Visual Equipment (1)
- Auto Parts & Accessories (1)
- Compressors (1)
- Drilling & Doweling Machines (1)
- Electrical Supplies (1)
- Extrusion (1)
- Food Preparation (1)
- Furniture (1)
- Kitchen Equipment (1)
- Milling, Morticing & Turning (1)
- Printers & Scanners (1)
- Raw Materials & Additives (1)
- Seeding & Tillage (1)
- Support Equipment (1)
- Surface Treatment (1)
- Trailers (1)
- List
- Grid
-
221 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
IMPORTANT REMOVAL INFORMATION - COVID-19 Lot removal to be coordinated with Site Supervisor or An Approved Machinery Mover. We will do our upmost ...
WELD-O-MATIC AF-2B ROCKER ARM SPOT WELDER, 75KVA, S/N 2827, 24” THROAT, 1/60/550V, .164 MILD STEEL
WELD-O-MATIC AF-2B ROCKER ARM SPOT WELDER, 75KVA, S/N 2827, 24” THROAT, 1/60/550V, .164 MILD STEEL CAPACITY, WELD-O-MATIC CONTROL CORNW 1, 2-STAGE...
MILLER CP-200 WELDER, S/N: JF929090 W/ MILLERMATIC S-52E WIRE FEEDER S/N: JF929030
ACME ELECTRIC SPOT WELDER S/N: 4612
ERICO JONES PW 1000 STUD WELDING SYSTEM, WELDS CD PINS & CD STUD 1/8” THROUGH 3/8” WELD BASE S/N:
ERICO JONES PW 1000 STUD WELDING SYSTEM, WELDS CD PINS & CD STUD 1/8” THROUGH 3/8” WELD BASE S/N: 162580, C/W ASSORTED STUD WELDS ...[more]
PIERCE ALL 8000, HYDRAULIC NOTCHER, 6” x 6” CAP., CORNER NOTCH IN .125 MILD STEEL 4-1/2” DEEP V
PIERCE ALL 8000, HYDRAULIC NOTCHER, 6” x 6” CAP., CORNER NOTCH IN .125 MILD STEEL 4-1/2” DEEP V NOTCH, 4HP, 220/440V 3 PHASE, PUNCH & DIE BLADES R...
PIERCE ALL 8000, HYDRAULIC NOTCHER, 6” x 6” CAP., CORNER NOTCH IN .125 MILD STEEL 4-1/2” DEEP V
PIERCE ALL 8000, HYDRAULIC NOTCHER, 6” x 6” CAP., CORNER NOTCH IN .125 MILD STEEL 4-1/2” DEEP V NOTCH, 4HP, 220/440V 3 PHASE, PUNCH & DIE BLADES R...
SCM SI16W SLIDING TABLE SAW, TILTING BLADE FROM 90 TO 45 DEGREES, S/N AB.11438, 1,150MM X 630MM
SCM SI16W SLIDING TABLE SAW, TILTING BLADE FROM 90 TO 45 DEGREES, S/N AB.11438, 1,150MM X 630MM WORKABLE DIMENSIONS, 3,050MM X 350MM SLIDING TABLE...
SAMCO EG STROKE SANDER, V 600 - KW51, S/N: 1248801/S
THOMAS 350SUP CUTOFF SAW, 3-SPEED DRIVE, BLADE SHAFT RPM 25/50/100, PEDESTAL BASE, COOLANT SYSTEM,
THOMAS 350SUP CUTOFF SAW, 3-SPEED DRIVE, BLADE SHAFT RPM 25/50/100, PEDESTAL BASE, COOLANT SYSTEM, LOCKING VISE, BAR STOP, 3/60/575V, 350MM MAX SA...
ALLSTEEL 160-12 HYDRAULIC PRESS BRAKE, 160 TON X 12’ CAP., S/N 1706, SHADOW II RECEIVER LIGHT
ALLSTEEL 160-12 HYDRAULIC PRESS BRAKE, 160 TON X 12’ CAP., S/N 1706, SHADOW II RECEIVER LIGHT CURTAINS, AUTOGAUGE G24 BACK GAUGE, 0-10” VARIABLE S...
LOT - ASSORTED DIES (NO SHELF) ...[more]
ALLSTEEL ¼-10 HYDRAULIC POWER SQUARING SHEAR, 10’ X ¼” CAP., S/N S-2698, BACK GAUGE, 10’ SQUARING
ALLSTEEL ¼-10 HYDRAULIC POWER SQUARING SHEAR, 10’ X ¼” CAP., S/N S-2698, BACK GAUGE, 10’ SQUARING ARM W/ FLIP OVER STOP, 2 DISAPPEARING STOPS, 20 ...
PIERCE-ALL 3050 PERF-O-MATOR SINGLE STATION TURRET PUNCH, 50 TON CAP., 3/8” MAX MATERIAL THICKNESS, 5” MAX HOLE SIZE, 100 SPM, 30” THROAT, APPROX....
ASEA PUNCH/DIE GRINDER, S/N: 017
VERTICUT 114-A ROLL-IN BANDSAW, S/N 1504
NISSAN OPTIMUM JC 50 PROPANE FORKLIFT, MODEL CPJ02A25PV, 4,750LB CAP., 3-STAGE MAST, 187” MAX
NISSAN OPTIMUM JC 50 PROPANE FORKLIFT, MODEL CPJ02A25PV, 4,750LB CAP., 3-STAGE MAST, 187” MAX LIFT, 36” 55E CASCADE SIDE SHIFTER, OUTDOOR TIRES, A...
DEVILBISS TAP-5050 AIR COMPRESSOR, 5HP, S/N 12669, 44643 PUMP, 80 GALLON TANK, 575V
DAHLGREN SYSTEM 300 ENGRAVER W/ STANDARD ACCESSORIES AND COLLET LOADING SPINDLE, SCU, TABLE, ¼”
DAHLGREN SYSTEM 300 ENGRAVER W/ STANDARD ACCESSORIES AND COLLET LOADING SPINDLE, SCU, TABLE, ¼” CARBIDE CUTTERS VARIOUS SIZES
DRAFTING TABLE, APPROX 42"L X 60"W
BLUE PRINT CABINET - 3 SECTIONS, EACH - 47'L X 35.5"W X 16.5"H
BROWN AND BOGGS, PUNCH PRESS, HP 1
GOLDEN BELT, FC95, BOX BOTTOMER, S/N: 6583
GRANT MFG., FLARING MACHINE
GRANT MFG., FLARING MACHINE ...[more]
USM, EYELETTING MACHINE, MOD: G, S/N:C552
CANADIAN B-126 DRILL PRESS "AS-IS"
TUBULAR RIVETTER, MOD: 71F, S/N: 115 ...[more]
WAGNER UF7222 BENCH GRINDER S/N: 623279, C/W BENCH
COOPER AND HORTON, HG63, BENCH GRINDER S/N:3205559
HITACHI, HIGH SPEED CUT OFF MACHINE, MOD: HU-12. S/N: 990031
Loading...-
221 item(s)/page