Goodwin Tool & Machine Ltd. - Surplus to the Ongoing Operations

by Infinity Asset Solutions Inc

Ended Jun 04, 2020 12:45pm ET (5:45pm BST) Timed Online Auction

Important Information

Goodwin Tool & Machine Ltd.

Date & Time:  Lots starts closing on Thursday, June 4th, 2020 at 11:00 am ET

Location: 192 Mary St, Brantford, ON N3S 3C2

Inspection Date:  Wednesday June 3rd, 9AM - 4PM or By Appointment

Industry: Machining Equipment

18% Buyers Premium applies on all online purchases.  

 A $2000 refundable security deposit is required upon online registration.  See Terms & Conditions Below.  

IMPORTANT REMOVAL INFORMATION - COVID-19

Curbside Pickup Available for hand carry & smaller lots. All other lot removals to be coordinated with Site Supervisor or An Approved Machinery Mover.

We will do our upmost to ensure all Customers are as safe as possible during the inspection & removal processes. We encourage you to practice social distancing while on site. Hand sanitizer and gloves will be made available to anyone who enters the auction site.

If you are experiencing any symptoms of illness or have travelled out of county in the last few weeks, please DO NOT attend the auction site.

We will continue to closely monitor this situation as it evolves and apply appropriate responses and actions. 

 

FEATURING

Boring Mills

TOSHIBA SHIBAURA BTD-11B CNC Horizontal Boring Mill, s/n 19603, 4-Axis, 50 Taper, Tooling, 55” x 63” Table, Chip Conveyor, 3/60/AC200/220V, Daikin Inverter, Marcus 75KVA Transformer

 

CNC Turning & Machining

GIDDINGS & LEWIS Type 48” VTL Vertical Turning Lathe, Rail Clamp System, (5)-Station Turret Head, 48” Chuck, Fanuc Control, General Numeric GN II Series Controls, Westinghouse 50HP Main Drive Motor, 650 – 2,000 RPM, 85 Amps, 480V, s/n 510-47-67

OKUMA Impact LU25 CNC Lathe, Twin (12) Station Turrets, Tailstock, Okuma OSP7000L Control, 12” 3-Jaw Chuck, Jorgenson Chip Conveyor, 3/60/220V, 49.8KVA, 130.7A, 134A Largest Motor, 60KVA Transformer, s/n 0126

MORI-SEIKI SL-3H CNC Lathe, s/n 4177, Fanuc Control, 9” 3-Jaw Chuck, Turret, Tailstock, Filtermist S-800 System, Hammond 30KVA Transformer

AMERICAN UNITURN 3220WX144 CNC Lathe, Siemens Control (Retrofit 2002), 24VDC Control Bolt, 3/60/550VAC AC Volt, 480-400V, 36” x 144”, 4.5” Spindle Bore, 12” Vertical Turret Head, Horizontal Tool Holder Head, 20” 4-Jaw Chuck, 24” in the Saddle, Hydraulic Power Pack, (2) Steady Rests 12” – 20” Opening, Asst. Tooling, Chip Conveyor, Transformer, Safety Guards, s/n 80267

TOSHIBA SHIBAURA VMC-85 CNC Vertical Machining Center, s/n 240515, Chip Conveyor, (40) ATC, TOSNUC CNC Control, 32” x 94” Table, 50 Taper

TOSHIBA SHIBAURA VMC-45 CNC Vertical Machining Center, TOSNUC CNC Control, (20) ATC, 40 Taper, s/n 240327

DAHLIH MCV1350 CNC Vertical Machining Center, s/n 1350124, Fanuc 11M Control, (24) ATC, 27” x 67” Table

 

Milling Machines

G. DUFOUR 624D Universal Milling Machine, s/n 115-192, 3/60/220V

 

Lathes

GH-1880ZX Geared Head Precision Lathe, 18” x 80”, Newall DP-700 DRO, Tailstock, Steady & Follow Rests, 12” 3-Jaw Chuck, 3” Spindle Bore, 3/60/575V, Quick Change Tool Post, s/n 077895

SIRCO PA-24 Engine Lathe, 24” x 84”, 3.5” Spindle Bore, Quick Change Tool Post, 4-Jaw Chuck, Tailstock, Newall DP-700 DRO, s/n 26533268

SIRCO PA-24 Engine Lathe, 24” x 84”, 3.5” Spindle Bore, Tailstock, (3) Steady Rests, 4-Jaw Chuck, s/n 2864703

MIDLAND CHICAGO M1 Turret Lathe

 

========================================= 

BidSpotter Customer Service Support Department  

Have a question pertaining to the bidding process?  

Visit our Frequently Asked Questions!   

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.  

Customer Support Hours: 

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST  

Email: support@bidspotter.com 

Office: (253) 858-6777      Toll Free: (866) 597-2437 

Frequently Asked Questions

 

Terms and Conditions

PAYMENT:    All payments must be in either Cash, Certified Cheque, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc., Visa & Mastercard will be accepted for total payments of $2,000.00 or less (amounts more than $2,000.00 will be subject to a 3% administrative fee).

Payment is due by:  Friday June 5th, 5PM


A 18% buyers premium will be added to all online purchases

Your credit card added through the Bidspotter.com fully secure and PCI compliant registration process will be charged a $2000.00 deposit in order to be approved to bid within the auction. You will not be approved without your credit card entered at the stage of registration being charged a deposit of $2000.00 

Credit Card Payments: Payments via credit card are accepted up to $2000.00 final invoice total (amounts more than $2,000.00 will be subject to a 3% administrative fee). Any invoice total larger than $2000.00 must be paid by wire transfer or certified check. Your deposit may be applied to your final invoice amount, even if your final invoice is larger than $2000.00


Removal deadline:  Wednesday June 17th

 

Site Supervisor:   Odd Knudsen 647-991-6905

 

Accounting: Victoria 437-994-6586, vwhitman@infinityassets.com

Banking Information (Wire Transfers):

Canadian WIRE TRANSFER INSTRUCTIONS.
Beneficiary Bank:
ROYAL BANK OF CANADA
3300 HIGHWAY #7
CONCORD, ONTARIO


Beneficiary Customer:

INFINITY ASSET SOLUTIONS INC.
ACCOUNT #: 1007137

TRANSIT #: 00192
BANK #: 003
SWIFT # ROYCCAT2

 

Terms and Conditions of Sale Persons participating in the auction shall be bound by ALL of the following terms and conditions, which are subject to amendments and modifications by the Auctioneer at the time of auction. 1. This catalogue is meant merely as a guide. The Auctioneer believes the descriptions contained herein to be correct, but make no warranty in connection therewith. 2. Auctioneer reserves the right to sell subject to reserve and to bid for its own account and for the accounts of others, whether by verbal or written proxy, all lots are subject to prior sale. 3. The Auctioneer reserves the right to refuse any applicant the privilege of bidding or attending at the auction and may revoke such privilege at any time. 4. All Articles will be sold to the highest bidder conforming to the bid process, provided that the Auctioneer reserves the right to sell articles by individual, group lots and “in bulk,” as he deems appropriate. The Auctioneer reserves the right to sell on behalf of third parties, its own account or on the account of others. Should any dispute arise between two or more bidders or as to any bid, the lot in question may, at the Auctioneers discretion, be immediately put up again and resold. The Auctioneer shall regulate all matters relating to the conduct of the auction and his decision shall be final and binding on all bidders. The record kept by the clerk of sale, shall in all cases be accepted by the bidder as final. 5. All sales shall be concluded as indicated by the Auctioneer and no Purchaser may thereafter revoke his bid. Title to the lots purchased shall not pass until payment in full of the purchase price is received. 6. ALL SALES ARE FINAL, ON AN “AS IS WHERE IS,” “IN PLACE” “WITH ALL FAULTS” BASIS WITH NO CONDITIONS OR WARRANTIES WHETHER EXPRESSED OR IMPLIED, STATUTORYOR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS, AS TO TITLE, DESCRIPTION, FITNESS FOR PURPOSE, QUANTITY, QUALITY, MERCHANTABILITY, STATE, CONDITION, LOCATION OR OTHERWISE. NO SALE SHALL BE INVALIDATED AND THE AUCTIONEER SHALL HAVE NO LIABILITY FOR A MISDESCRIPTION OF ANY ARTICLE OR LOT WHETHER CONTAINED IN A CATALOGUE, ADVERTISEMENT, OR OTHERWISE. DESCRIPTIONS HAVE BEEN PREPARED FOR GUIDE PURPOSES ONLY AND SHALL NOT BE RULED UPON BY THE PURCHASER FOR ACCURACY OR COMPLETENESS. PLEASE INSPECT ALL ITEMS BEFORE BIDDING. PURCHASERS SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON THEIR OWN INSPECTIONS AND INVESTIGATIONS. 7. A deposit of equal to 25 percent of the purchases shall be made at the time of sale. The balance of the purchase price must be paid in full before or immediately after the conclusion of the auction. All payments must be in Cash, Certified Funds, Visa, MasterCard or Interac, Wire Transfers or Company Checks must be accompanied with a bank letter guaranteeing irrevocable payment to Infinity Asset Solutions Inc. Deposits on account of purchases may be made in advance of the auction and the balance thereof will be refunded immediately after the auction. The Auctioneer reserves the right to put articles back up for auction if deposit is not received at or before the time of sale. 8. No article shall be removed unless paid for in full and articles purchased shall be removed within the guidelines and terms stipulated. The Purchaser shall be responsible for all the costs of removal and shall be liable for all damages, including without limitation, any environmental damage, caused during or as a result of the removal. Purchasers shall comply with all environmental laws and regulations including requirements as to bonding of movers. No claims shall be allowed after removal of the purchased article. 9. Where available, documents of transfer, including motor vehicle ownership documents, which are in possession of the Auctioneer, will be provided to the Purchaser following the auction or as soon thereafter as such documents are available. 10. No purchaser may assign, transfer or dispose of his rights in any article purchased before he has paid the purchase price in full. 11. Purchasers shall pay applicable federal and provincial taxes, or furnish exemption certificates at the time of payment for goods purchased. All purchases are subject to Federal Harmonized Sales Tax (H.S.T.) at all times (including buyer's premium). No exceptions whatsoever. 12. Time shall be of the essence. If a Purchaser fails to make payment of remove goods within the time periods hereinabove provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Auctioneer in his discretion deems advisable, and the Purchaser shall be liable for the shortfall and all costs expenses, including but not limited to interest rates (a minimum of 1.5% per month or 18% per annum), legal fees, moving and storage (a minimum rate of $2.00/sq.ft. per month) and commissions, incurred such as resale. 13. The Auctioneer assumes no responsibility or any liability once title passes, which occurs at time of payment in full. Purchasers are advised to prearrange for insurance coverage of their purchase. Title will revert to the seller in the event purchaser does not remove his purchases by the time specified. 14. If the Auctioneer is unable to deliver an article sold to a Purchaser due to fire, theft or any other reason whatsoever, the Auctioneer shall reimburse the Purchaser for all monies paid to the Auctioneer in respect of the article and the Auctioneer shall have no further liability to the Purchaser arising from or relating to such loss, including without limitation, any damages or loss of profits. 15. Bidders acknowledge that any auction site is a potentially dangerous place with noxious, corrosive and pressurized substances being present, heavy equipment being operated and electric circuits being live. Every person at the Auction Site before, during and after the auction sale shall be deemed to be there at their own risk with notice of the condition of the premises, the activities on the premises and the conduct of third parties, and the Bidder shall so advise his/her agents and employees. No person shall have any claim against the auctioneer, his agents, employees or principals for any injuries sustained for damages to or loss of property which may occur from any cause whatsoever.