Refine your search
Category
- Machine Tools & Tools (162)
- Warehouse Equipment (41)
- Machines (40)
- Other Industrial Supplies & Equipment (38)
- Welders (32)
- Measuring & Testing Equipment (30)
- Handling & Packaging (25)
- Saws (15)
- Compressors (9)
- Forklifts (7)
- Metalworking (7)
- Generators (6)
- Presses (4)
- Heavy Duty Trucks (3)
- Auto Parts & Accessories (2)
- Planing (2)
- Sheet Metal Processing (2)
- Agricultural equipment (1)
- Networking & Communications (1)
- Processing (1)
- Surface Treatment Machinery (1)
- Trailers (1)
- List
- Grid
-
430 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
COMPARE 7.5HP TANK TYPE AIR COMPRESSOR W/CONTROL
METAL TABLE W/6" VISE (38"D X 9'L APPROX) NO CONTENTS
LOT OF BAR AND TUBE METAL STOCK W/2 RACKS AND 2 PALLETS OF METAL
2-SECTION METAL HEAVY DUTY SHELVING W/CONTENTS
2-SECTION METAL HEAVY DUTY SHELVING W/CONTENTS
LOT OF METAL STOCK W/6 LEVEL SHELVES AND 2 LOWER LEVELS OF METAL ON TABLE
2 DOOR METAL CABINET W/HELICOIL AND FASTENER STOCK
2-SECTION HEAVY DUTY METAL RACK W/LATHE AND FASTENER STOCK
PIGEON HOLE CABINET W/MIXED HARDWARE
ALUMINUM, BRASS AND COPPER METAL IN BUCKETS AND BARREL OF METAL
REAMERS, CUTTING HEADS, COLLETS
REAMERS, CUTTING HEADS, COLLETS
CONDUIT BENDER W/ROLLER STANDS
CONDUIT BENDER W/ROLLER STANDS
TOYOTA 8FGCU25 PROPANE FORKLIFT, 3,400LB CAP, 218" LIFT, SIDE SHIFT, 3 STAGE MAST, S/N 16473,
TOYOTA 8FGCU25 PROPANE FORKLIFT, 3,400LB CAP, 218" LIFT, SIDE SHIFT, 3 STAGE MAST, S/N 16473, SOLID TIRES, 7600 HRS APPROX (NO PROPANE TANK) (SUBJ...
TOS W100A HORIZONTAL BORING MILL, REMANUFACTURED BY TOS IN 2000, HEIDENHAIN 4-AXIS DRO, 49” X 49”
TOS W100A HORIZONTAL BORING MILL, REMANUFACTURED BY TOS IN 2000, HEIDENHAIN 4-AXIS DRO, 49” X 49” POWERED ROTARY TABLE, POWER DRAWBAR, SPEEDS TO 1...
REX MANUFACTURING TRANSFORMER, 30KVA, 3 PHASE, 600 VOLTS TO 220 VOLTS
LOT OF 2 - 20"W X 40"T ANGLE PLATES
LOT OF RISER BLOCKS, ANGLE PLATES, V BLOCKS
LOT OF 15 - 50 TAPER TOOL HOLDERS W/CUTTING ATTACHMENTS
LOT OF 10 - 50 TAPER TOOL HOLDERS W/CUTTING ATTACHMENTS AND HOLDING TABLE
LOT OF 14 - 50 TAPER TOOL HOLDERS W/CUTTING ATTACHMENTS
LOT OF 15 - 50 TAPER TOOL HOLDERS W/ATTACHMENTS
WORK BENCH W/MACHINE SCREWS, HOLD DOWNS, PARALLELS, ETC
LOT OF 5 BOXES OF CUTTING HEADS, TOOL HOLDERS, BORING BARS, ETC
TESZAN SN 71B LATHE, 32” SWING X 160” BETWEEN CENTERS, FAGOR 2-AXIS DRO, 12” 3-JAW CHUCK, 3” BORE,
TESZAN SN 71B LATHE, 32” SWING X 160” BETWEEN CENTERS, FAGOR 2-AXIS DRO, 12” 3-JAW CHUCK, 3” BORE, TAILSTOCK, TOOL POST, STEADY RESTS, EXTRA 4-JAW...
TOS SN 63C LATHE, 28” SWING X 120” BETWEEN CENTERS, ACU-RITE 2-AXIS DRO, 12” 3-JAW CHUCK, 2.5” BORE,
TOS SN 63C LATHE, 28” SWING X 120” BETWEEN CENTERS, ACU-RITE 2-AXIS DRO, 12” 3-JAW CHUCK, 2.5” BORE, TAILSTOCK, TOOL POST, S/N 463300910371 ...[...
HWACHEON HL580X2000G LATHE, 23” SWING X 80” BETWEEN CENTERS, 12” 3-JAW CHUCK, 3-1/8” BORE, NEWALL
HWACHEON HL580X2000G LATHE, 23” SWING X 80” BETWEEN CENTERS, 12” 3-JAW CHUCK, 3-1/8” BORE, NEWALL SAPPHIRE 2-AXIS DRO, 28 – 1,350 RPM, 15HP, TAILS...
HWACHEON HL580X2000G LATHE, 23” SWING X 80” BETWEEN CENTERS, 12” 3-JAW CHUCK, 3-1/8” BORE, 28 – 1,
HWACHEON HL580X2000G LATHE, 23” SWING X 80” BETWEEN CENTERS, 12” 3-JAW CHUCK, 3-1/8” BORE, 28 – 1,350 RPM, 15HP, TAILSTOCK, TOOL POST, EXTRA CHUCK...
GEMINIS GE870 ENGINE LATHE, 41" SWING OVER BED, 29" SWING OVER CROSS SLIDE, 80" BETWEEN CENTERS, 3-
GEMINIS GE870 ENGINE LATHE, 41" SWING OVER BED, 29" SWING OVER CROSS SLIDE, 80" BETWEEN CENTERS, 3-1/4" BORE, 16 - 1,250 RPM, 3-JAW CHUCK, SQUARE ...
BORING BARS, CUTTING BLADES, LATHE CENTERS (JAWS) AND TOOL HOLDERS
DRILL BITS, TOOL HOLDERS, BORING BARS
DARBERT VERTICAL MILLING MACHINE, HEIDENHAIN DRO, 5HP, 12” X 54” TABLE, ALIGN POWER FEED, PROBE
DARBERT VERTICAL MILLING MACHINE, HEIDENHAIN DRO, 5HP, 12” X 54” TABLE, ALIGN POWER FEED, PROBE ...[more]
LOT OF 40 TAPER TOOL HOLDERS W/CHUCKS AND CUTTING HEADS
SHELVING UNIT W/MACHINE SCREWS, HOLD DOWNS, ANGLE BLOCKS, ETC
LOT OF 2 BOXES OF CARBIDE CUTTING ATTACHMENT BARS
LOT OF 2 BOXES OF CUTTER BARS
LOT OF 2 BOXES OF CUTTER BARS
LOT OF 2 BOXES OF CUTTER BARS
LOT OF 2 BOXES OF CUTTER BARS
LOT OF 2 BOXES OF CUTTING WHEELS
LOT OF 2 BOXES OF CUTTING WHEELS
LOT OF 2 BOXES OF CARBIDE CUTTING ATTACHMENT BARS
LOT OF 2 BOXES OF CARBIDE CUTTING ATTACHMENT BARS
LOT OF CUTTING BAR HOLDERS AND CARBIDE CUTTING ATTACHMENT BARS
2 DOOR STEEL CABINET AND STEEL TABLE
CARBIDE CUTTING HEADS, BARS, TOOL HOLDER
LOT OF 2 BOXES OF THREADING DIES AND HOLDERS
LOT OF 1 BOX OF TAPS, TAP EXTRACTORS
Loading...-
430 item(s)/page